user/sven/linux.git/include, branch v4.9.243

hil/parisc: Disable HIL driver when it gets stuck

2020-11-10T09:24:00Z

commit 879bc2d27904354b98ca295b6168718e045c4aa2 upstream. When starting a HP machine with HIL driver but without an HIL keyboard or HIL mouse attached, it may happen that data written to the HIL loop gets stuck (e.g. because the transaction queue is full). Usually one will then have to reboot the machine because all you see is and endless output of: Transaction add failed: transaction already queued? In the higher layers hp_sdc_enqueue_transaction() is called to queued up a HIL packet. This function returns an error code, and this patch adds the necessary checks for this return code and disables the HIL driver if further packets can't be sent. Tested on a HP 730 and a HP 715/64 machine. Signed-off-by: Helge Deller Cc: Signed-off-by: Greg Kroah-Hartman

fscrypto: move ioctl processing more fully into common code

2020-11-10T09:23:51Z

commit db717d8e26c2d1b0dba3e08668a1e6a7f665adde upstream. Multiple bugs were recently fixed in the "set encryption policy" ioctl. To make it clear that fscrypt_process_policy() and fscrypt_get_policy() implement ioctls and therefore their implementations must take standard security and correctness precautions, rename them to fscrypt_ioctl_set_policy() and fscrypt_ioctl_get_policy(). Make the latter take in a struct file * to make it consistent with the former. Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

mtd: lpddr: Fix bad logic in print_drs_error

2020-11-10T09:23:51Z

commit 1c9c02bb22684f6949d2e7ddc0a3ff364fd5a6fc upstream. Update logic for broken test. Use a more common logging style. It appears the logic in this function is broken for the consecutive tests of if (prog_status & 0x3) ... else if (prog_status & 0x2) ... else (prog_status & 0x1) ... Likely the first test should be if ((prog_status & 0x3) == 0x3) Found by inspection of include files using printk. Fixes: eb3db27507f7 ("[MTD] LPDDR PFOW definition") Cc: stable@vger.kernel.org Reported-by: Joe Perches Signed-off-by: Gustavo A. R. Silva Acked-by: Miquel Raynal Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/3fb0e29f5b601db8be2938a01d974b00c8788501.1588016644.git.gustavo@embeddedor.com Signed-off-by: Greg Kroah-Hartman

scsi: target: core: Add CONTROL field for trace events

2020-10-29T08:05:43Z

[ Upstream commit 7010645ba7256992818b518163f46bd4cdf8002a ] trace-cmd report doesn't show events from target subsystem because scsi_command_size() leaks through event format string: [target:target_sequencer_start] function scsi_command_size not defined [target:target_cmd_complete] function scsi_command_size not defined Addition of scsi_command_size() to plugin_scsi.c in trace-cmd doesn't help because an expression is used inside TP_printk(). trace-cmd event parser doesn't understand minus sign inside [ ]: Error: expected ']' but read '-' Rather than duplicating kernel code in plugin_scsi.c, provide a dedicated field for CONTROL byte. Link: https://lore.kernel.org/r/20200929125957.83069-1-r.bolshakov@yadro.com Reviewed-by: Mike Christie Signed-off-by: Roman Bolshakov Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

overflow: Include header file with SIZE_MAX declaration

2020-10-29T08:05:39Z

[ Upstream commit a4947e84f23474803b62a2759b5808147e4e15f9 ] The various array_size functions use SIZE_MAX define, but missed limits.h causes to failure to compile code that needs overflow.h. In file included from drivers/infiniband/core/uverbs_std_types_device.c:6: ./include/linux/overflow.h: In function 'array_size': ./include/linux/overflow.h:258:10: error: 'SIZE_MAX' undeclared (first use in this function) 258 | return SIZE_MAX; | ^~~~~~~~ Fixes: 610b15c50e86 ("overflow.h: Add allocation size calculation helpers") Link: https://lore.kernel.org/r/20200913102928.134985-1-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

net/ipv4: always honour route mtu during forwarding

2020-10-29T08:05:31Z

[ Upstream commit 02a1b175b0e92d9e0fa5df3957ade8d733ceb6a0 ] Documentation/networking/ip-sysctl.txt:46 says: ip_forward_use_pmtu - BOOLEAN By default we don't trust protocol path MTUs while forwarding because they could be easily forged and can lead to unwanted fragmentation by the router. You only need to enable this if you have user-space software which tries to discover path mtus by itself and depends on the kernel honoring this information. This is normally not the case. Default: 0 (disabled) Possible values: 0 - disabled 1 - enabled Which makes it pretty clear that setting it to 1 is a potential security/safety/DoS issue, and yet it is entirely reasonable to want forwarded traffic to honour explicitly administrator configured route mtus (instead of defaulting to device mtu). Indeed, I can't think of a single reason why you wouldn't want to. Since you configured a route mtu you probably know better... It is pretty common to have a higher device mtu to allow receiving large (jumbo) frames, while having some routes via that interface (potentially including the default route to the internet) specify a lower mtu. Note that ipv6 forwarding uses device mtu unless the route is locked (in which case it will use the route mtu). This approach is not usable for IPv4 where an 'mtu lock' on a route also has the side effect of disabling TCP path mtu discovery via disabling the IPv4 DF (don't frag) bit on all outgoing frames. I'm not aware of a way to lock a route from an IPv6 RA, so that also potentially seems wrong. Signed-off-by: Maciej Żenczykowski Cc: Eric Dumazet Cc: Willem de Bruijn Cc: Lorenzo Colitti Cc: Sunmeet Gill (Sunny) Cc: Vinay Paradkar Cc: Tyler Wear Cc: David Ahern Reviewed-by: Eric Dumazet Signed-off-by: Greg Kroah-Hartman

Bluetooth: Disconnect if E0 is used for Level 4

2020-10-17T09:02:19Z

commit 8746f135bb01872ff412d408ea1aa9ebd328c1f5 upstream. E0 is not allowed with Level 4: BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319: '128-bit equivalent strength for link and encryption keys required using FIPS approved algorithms (E0 not allowed, SAFER+ not allowed, and P-192 not allowed; encryption key not shortened' SC enabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) Secure Connections (Host Support) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with AES-CCM (0x02) SC disabled: > HCI Event: Read Remote Extended Features (0x23) plen 13 Status: Success (0x00) Handle: 256 Page: 1/2 Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) LE Supported (Host) > HCI Event: Encryption Change (0x08) plen 4 Status: Success (0x00) Handle: 256 Encryption: Enabled with E0 (0x01) [May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used < HCI Command: Disconnect (0x01|0x0006) plen 3 Handle: 256 Reason: Authentication Failure (0x05) Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Cc: Hans-Christian Noren Egtvedt Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix update of connection state in `hci_encrypt_cfm`

2020-10-17T09:02:19Z

commit 339ddaa626995bc6218972ca241471f3717cc5f4 upstream. Starting with the upgrade to v5.8-rc3, I've noticed I wasn't able to connect to my Bluetooth headset properly anymore. While connecting to the device would eventually succeed, bluetoothd seemed to be confused about the current connection state where the state was flapping hence and forth. Bisecting this issue led to commit 3ca44c16b0dc (Bluetooth: Consolidate encryption handling in hci_encrypt_cfm, 2020-05-19), which refactored `hci_encrypt_cfm` to also handle updating the connection state. The commit in question changed the code to call `hci_connect_cfm` inside `hci_encrypt_cfm` and to change the connection state. But with the conversion, we now only update the connection state if a status was set already. In fact, the reverse should be true: the status should be updated if no status is yet set. So let's fix the isuse by reversing the condition. Fixes: 3ca44c16b0dc ("Bluetooth: Consolidate encryption handling in hci_encrypt_cfm") Signed-off-by: Patrick Steinhardt Acked-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman

Bluetooth: Consolidate encryption handling in hci_encrypt_cfm

2020-10-17T09:02:19Z

commit 3ca44c16b0dcc764b641ee4ac226909f5c421aa3 upstream. This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection state is BT_CONFIG so callers don't have to check the state. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Cc: Hans-Christian Noren Egtvedt Signed-off-by: Greg Kroah-Hartman

Bluetooth: L2CAP: Fix calling sk_filter on non-socket based channel

2020-10-17T09:02:19Z

commit f19425641cb2572a33cb074d5e30283720bd4d22 upstream. Only sockets will have the chan->data set to an actual sk, channels like A2MP would have its own data which would likely cause a crash when calling sk_filter, in order to fix this a new callback has been introduced so channels can implement their own filtering if necessary. Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Signed-off-by: Greg Kroah-Hartman