user/sven/linux.git/include, branch v4.9.270

vt: Fix character height handling with VT_RESIZEX

2021-05-26T09:29:08Z

commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream. Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

extcon: adc-jack: Fix incompatible pointer type warning

2021-05-22T08:40:33Z

commit 8a522bf2d4f788306443d36b26b54f0aedcdfdbe upstream. This patch fixes the incompatible warning of extcon-adc-jack.c driver when calling devm_extcon_dev_allocate(). Signed-off-by: Peter Foley [cw00.choi: Modify the patch title and descritpion] Signed-off-by: Chanwoo Choi Signed-off-by: Greg Kroah-Hartman

HID: plantronics: Workaround for double volume key presses

2021-05-22T08:40:26Z

[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ] Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice for each volume key press. This patch adds a quirk to hid-plantronics for this product ID, which will ignore the second volume key press if it happens within 5 ms from the last one that was handled. The patch was tested on the mentioned model only, it shouldn't affect other models, however, this quirk might be needed for them too. Auto-repeat (when a key is held pressed) is not affected, because the rate is about 3 times per second, which is far less frequent than once in 5 ms. Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls") Signed-off-by: Maxim Mikityanskiy Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

scsi: fcoe: Fix mismatched fcoe_wwn_from_mac declaration

2021-05-22T08:40:25Z

[ Upstream commit 5b11c9d80bde81f6896cc85b23aeaa9502a704ed ] An old cleanup changed the array size from MAX_ADDR_LEN to unspecified in the declaration, but now gcc-11 warns about this: drivers/scsi/fcoe/fcoe_ctlr.c:1972:37: error: argument 1 of type ‘unsigned char[32]’ with mismatched bound [-Werror=array-parameter=] 1972 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], | ~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ In file included from /git/arm-soc/drivers/scsi/fcoe/fcoe_ctlr.c:33: include/scsi/libfcoe.h:252:37: note: previously declared as ‘unsigned char[]’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[], unsigned int, unsigned int); | ~~~~~~~~~~~~~~^~~~~ Change the type back to what the function definition uses. Link: https://lore.kernel.org/r/20210322164702.957810-1-arnd@kernel.org Fixes: fdd78027fd47 ("[SCSI] fcoe: cleans up libfcoe.h and adds fcoe.h for fcoe module") Signed-off-by: Arnd Bergmann Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

tty: fix return value for unsupported ioctls

2021-05-22T08:40:24Z

[ Upstream commit 1b8b20868a6d64cfe8174a21b25b74367bdf0560 ] Drivers should return -ENOTTY ("Inappropriate I/O control operation") when an ioctl isn't supported, while -EINVAL is used for invalid arguments. Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned -EINVAL when a tty driver did not implement the corresponding operations. Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a corresponding Fixes tag below. Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler") Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

tty: actually undefine superseded ASYNC flags

2021-05-22T08:40:24Z

[ Upstream commit d09845e98a05850a8094ea8fd6dd09a8e6824fff ] Some kernel-internal ASYNC flags have been superseded by tty-port flags and should no longer be used by kernel drivers. Fix the misspelled "__KERNEL__" compile guards which failed their sole purpose to break out-of-tree drivers that have not yet been updated. Fixes: 5c0517fefc92 ("tty: core: Undefine ASYNC_* flags superceded by TTY_PORT* flags") Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210407095208.31838-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

Bluetooth: verify AMP hci_chan before amp_destroy

2021-05-22T08:40:20Z

commit 5c4c8c9544099bb9043a10a5318130a943e32fc3 upstream. hci_chan can be created in 2 places: hci_loglink_complete_evt() if it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory, Only AMP hci_chan should be removed by a call to hci_disconn_loglink_complete_evt(). However, the controller might mess up, call that function, and destroy an hci_chan which is not initiated by hci_loglink_complete_evt(). This patch adds a verification that the destroyed hci_chan must have been init'd by hci_loglink_complete_evt(). Example crash call trace: Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe3/0x144 lib/dump_stack.c:118 print_address_description+0x67/0x22a mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report mm/kasan/report.c:412 [inline] kasan_report+0x251/0x28f mm/kasan/report.c:396 hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072 l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877 l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661 l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline] l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline] l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline] l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline] l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023 l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596 hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline] hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 Allocated by task 38: set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787 kmalloc include/linux/slab.h:515 [inline] kzalloc include/linux/slab.h:709 [inline] hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674 l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062 l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline] l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381 hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404 hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline] hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 Freed by task 1732: set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free mm/kasan/kasan.c:521 [inline] __kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436 slab_free mm/slub.c:3009 [inline] kfree+0x182/0x21e mm/slub.c:3972 hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline] hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321 kthread+0x2f0/0x304 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 The buggy address belongs to the object at ffff8881d7af9180 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 24 bytes inside of 128-byte region [ffff8881d7af9180, ffff8881d7af9200) The buggy address belongs to the page: page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0 flags: 0x8000000000000200(slab) raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200 raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Signed-off-by: Archie Pusaka Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com Reviewed-by: Alain Michaud Reviewed-by: Abhishek Pandit-Subedi Signed-off-by: Marcel Holtmann Cc: George Kennedy Signed-off-by: Greg Kroah-Hartman

sch_red: fix off-by-one checks in red_check_params()

2021-04-16T09:59:07Z

[ Upstream commit 3a87571f0ffc51ba3bf3ecdb6032861d0154b164 ] This fixes following syzbot report: UBSAN: shift-out-of-bounds in ./include/net/red.h:237:23 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 8418 Comm: syz-executor170 Not tainted 5.12.0-rc4-next-20210324-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 red_set_parms include/net/red.h:237 [inline] choke_change.cold+0x3c/0xc8 net/sched/sch_choke.c:414 qdisc_create+0x475/0x12f0 net/sched/sch_api.c:1247 tc_modify_qdisc+0x4c8/0x1a50 net/sched/sch_api.c:1663 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x43f039 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdfa725168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000400488 RCX: 000000000043f039 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 0000000000403020 R08: 0000000000400488 R09: 0000000000400488 R10: 0000000000400488 R11: 0000000000000246 R12: 00000000004030b0 R13: 0000000000000000 R14: 00000000004ac018 R15: 0000000000400488 Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: sched: validate stab values

2021-03-30T12:41:42Z

commit e323d865b36134e8c5c82c834df89109a5c60dab upstream. iproute2 package is well behaved, but malicious user space can provide illegal shift values and trigger UBSAN reports. Add stab parameter to red_check_params() to validate user input. syzbot reported: UBSAN: shift-out-of-bounds in ./include/net/red.h:312:18 shift exponent 111 is too large for 64-bit type 'long unsigned int' CPU: 1 PID: 14662 Comm: syz-executor.3 Not tainted 5.12.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 red_calc_qavg_from_idle_time include/net/red.h:312 [inline] red_calc_qavg include/net/red.h:353 [inline] choke_enqueue.cold+0x18/0x3dd net/sched/sch_choke.c:221 __dev_xmit_skb net/core/dev.c:3837 [inline] __dev_queue_xmit+0x1943/0x2e00 net/core/dev.c:4150 neigh_hh_output include/net/neighbour.h:499 [inline] neigh_output include/net/neighbour.h:508 [inline] ip6_finish_output2+0x911/0x1700 net/ipv6/ip6_output.c:117 __ip6_finish_output net/ipv6/ip6_output.c:182 [inline] __ip6_finish_output+0x4c1/0xe10 net/ipv6/ip6_output.c:161 ip6_finish_output+0x35/0x200 net/ipv6/ip6_output.c:192 NF_HOOK_COND include/linux/netfilter.h:290 [inline] ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:215 dst_output include/net/dst.h:448 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] NF_HOOK include/linux/netfilter.h:295 [inline] ip6_xmit+0x127e/0x1eb0 net/ipv6/ip6_output.c:320 inet6_csk_xmit+0x358/0x630 net/ipv6/inet6_connection_sock.c:135 dccp_transmit_skb+0x973/0x12c0 net/dccp/output.c:138 dccp_send_reset+0x21b/0x2b0 net/dccp/output.c:535 dccp_finish_passive_close net/dccp/proto.c:123 [inline] dccp_finish_passive_close+0xed/0x140 net/dccp/proto.c:118 dccp_terminate_connection net/dccp/proto.c:958 [inline] dccp_close+0xb3c/0xe60 net/dccp/proto.c:1028 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:478 __sock_release+0xcd/0x280 net/socket.c:599 sock_close+0x18/0x20 net/socket.c:1258 __fput+0x288/0x920 fs/file_table.c:280 task_work_run+0xdd/0x1a0 kernel/task_work.c:140 tracehook_notify_resume include/linux/tracehook.h:189 [inline] Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

can: dev: Move device back to init netns on owning netns delete

2021-03-30T12:41:42Z

commit 3a5ca857079ea022e0b1b17fc154f7ad7dbc150f upstream. When a non-initial netns is destroyed, the usual policy is to delete all virtual network interfaces contained, but move physical interfaces back to the initial netns. This keeps the physical interface visible on the system. CAN devices are somewhat special, as they define rtnl_link_ops even if they are physical devices. If a CAN interface is moved into a non-initial netns, destroying that netns lets the interface vanish instead of moving it back to the initial netns. default_device_exit() skips CAN interfaces due to having rtnl_link_ops set. Reproducer: ip netns add foo ip link set can0 netns foo ip netns delete foo WARNING: CPU: 1 PID: 84 at net/core/dev.c:11030 ops_exit_list+0x38/0x60 CPU: 1 PID: 84 Comm: kworker/u4:2 Not tainted 5.10.19 #1 Workqueue: netns cleanup_net [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x94/0xa8) [] (dump_stack) from [] (__warn+0xb8/0x114) [] (__warn) from [] (warn_slowpath_fmt+0x7c/0xac) [] (warn_slowpath_fmt) from [] (ops_exit_list+0x38/0x60) [] (ops_exit_list) from [] (cleanup_net+0x230/0x380) [] (cleanup_net) from [] (process_one_work+0x1d8/0x438) [] (process_one_work) from [] (worker_thread+0x64/0x5a8) [] (worker_thread) from [] (kthread+0x148/0x14c) [] (kthread) from [] (ret_from_fork+0x14/0x2c) To properly restore physical CAN devices to the initial netns on owning netns exit, introduce a flag on rtnl_link_ops that can be set by drivers. For CAN devices setting this flag, default_device_exit() considers them non-virtual, applying the usual namespace move. The issue was introduced in the commit mentioned below, as at that time CAN devices did not have a dellink() operation. Fixes: e008b5fc8dc7 ("net: Simplfy default_device_exit and improve batching.") Link: https://lore.kernel.org/r/20210302122423.872326-1-martin@strongswan.org Signed-off-by: Martin Willi Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman