user/sven/linux.git/include, branch v4.9.57

ALSA: seq: Fix copy_from_user() call inside lock

2017-10-18T07:35:40Z

commit 5803b023881857db32ffefa0d269c90280a67ee0 upstream. The event handler in the virmidi sequencer code takes a read-lock for the linked list traverse, while it's calling snd_seq_dump_var_event() in the loop. The latter function may expand the user-space data depending on the event type. It eventually invokes copy_from_user(), which might be a potential dead-lock. The sequencer core guarantees that the user-space data is passed only with atomic=0 argument, but snd_virmidi_dev_receive_event() ignores it and always takes read-lock(). For avoiding the problem above, this patch introduces rwsem for non-atomic case, while keeping rwlock for atomic case. Also while we're at it: the superfluous irq flags is dropped in snd_virmidi_input_open(). Reported-by: Jia-Ju Bai Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

fs/mpage.c: fix mpage_writepage() for pages with buffers

2017-10-18T07:35:39Z

commit f892760aa66a2d657deaf59538fb69433036767c upstream. When using FAT on a block device which supports rw_page, we can hit BUG_ON(!PageLocked(page)) in try_to_free_buffers(). This is because we call clean_buffers() after unlocking the page we've written. Introduce a new clean_page_buffers() which cleans all buffers associated with a page and call it from within bdev_write_page(). [akpm@linux-foundation.org: s/PAGE_SIZE/~0U/ per Linus and Matthew] Link: http://lkml.kernel.org/r/20171006211541.GA7409@bombadil.infradead.org Signed-off-by: Matthew Wilcox Reported-by: Toshi Kani Reported-by: OGAWA Hirofumi Tested-by: Toshi Kani Acked-by: Johannes Thumshirn Cc: Ross Zwisler Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs

2017-10-12T09:51:25Z

commit 50e76632339d4655859523a39249dd95ee5e93e7 upstream. Cpusets vs. suspend-resume is _completely_ broken. And it got noticed because it now resulted in non-cpuset usage breaking too. On suspend cpuset_cpu_inactive() doesn't call into cpuset_update_active_cpus() because it doesn't want to move tasks about, there is no need, all tasks are frozen and won't run again until after we've resumed everything. But this means that when we finally do call into cpuset_update_active_cpus() after resuming the last frozen cpu in cpuset_cpu_active(), the top_cpuset will not have any difference with the cpu_active_mask and this it will not in fact do _anything_. So the cpuset configuration will not be restored. This was largely hidden because we would unconditionally create identity domains and mobile users would not in fact use cpusets much. And servers what do use cpusets tend to not suspend-resume much. An addition problem is that we'd not in fact wait for the cpuset work to finish before resuming the tasks, allowing spurious migrations outside of the specified domains. Fix the rebuild by introducing cpuset_force_rebuild() and fix the ordering with cpuset_wait_for_hotplug(). Reported-by: Andy Lutomirski Signed-off-by: Peter Zijlstra (Intel) Cc: Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Tejun Heo Cc: Thomas Gleixner Fixes: deb7aa308ea2 ("cpuset: reorganize CPU / memory hotplug handling") Link: http://lkml.kernel.org/r/20170907091338.orwxrqkbfkki3c24@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar Signed-off-by: Mike Galbraith Signed-off-by: Greg Kroah-Hartman

netlink: fix nla_put_{u8,u16,u32} for KASAN

2017-10-12T09:51:25Z

commit b4391db42308c9940944b5d7be5ca4b78fb88dd0 upstream. When CONFIG_KASAN is enabled, the "--param asan-stack=1" causes rather large stack frames in some functions. This goes unnoticed normally because CONFIG_FRAME_WARN is disabled with CONFIG_KASAN by default as of commit 3f181b4d8652 ("lib/Kconfig.debug: disable -Wframe-larger-than warnings with KASAN=y"). The kernelci.org build bot however has the warning enabled and that led me to investigate it a little further, as every build produces these warnings: net/wireless/nl80211.c:4389:1: warning: the frame size of 2240 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:1895:1: warning: the frame size of 3776 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/wireless/nl80211.c:1410:1: warning: the frame size of 2208 bytes is larger than 2048 bytes [-Wframe-larger-than=] net/bridge/br_netlink.c:1282:1: warning: the frame size of 2544 bytes is larger than 2048 bytes [-Wframe-larger-than=] Most of this problem is now solved in gcc-8, which can consolidate the stack slots for the inline function arguments. On older compilers we can add a workaround by declaring a local variable in each function to pass the inline function argument. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

percpu: make this_cpu_generic_read() atomic w.r.t. interrupts

2017-10-12T09:51:23Z

commit e88d62cd4b2f0b1ae55e9008e79c2794b1fc914d upstream. As raw_cpu_generic_read() is a plain read from a raw_cpu_ptr() address, it's possible (albeit unlikely) that the compiler will split the access across multiple instructions. In this_cpu_generic_read() we disable preemption but not interrupts before calling raw_cpu_generic_read(). Thus, an interrupt could be taken in the middle of the split load instructions. If a this_cpu_write() or RMW this_cpu_*() op is made to the same variable in the interrupt handling path, this_cpu_read() will return a torn value. For native word types, we can avoid tearing using READ_ONCE(), but this won't work in all cases (e.g. 64-bit types on most 32-bit platforms). This patch reworks this_cpu_generic_read() to use READ_ONCE() where possible, otherwise falling back to disabling interrupts. Signed-off-by: Mark Rutland Cc: Arnd Bergmann Cc: Christoph Lameter Cc: Peter Zijlstra Cc: Pranith Kumar Cc: Tejun Heo Cc: Thomas Gleixner Cc: linux-arch@vger.kernel.org Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

bpf: one perf event close won't free bpf program attached by another perf event

2017-10-12T09:51:21Z

[ Upstream commit ec9dd352d591f0c90402ec67a317c1ed4fb2e638 ] This patch fixes a bug exhibited by the following scenario: 1. fd1 = perf_event_open with attr.config = ID1 2. attach bpf program prog1 to fd1 3. fd2 = perf_event_open with attr.config = ID1 4. user program closes fd2 and prog1 is detached from the tracepoint. 5. user program with fd1 does not work properly as tracepoint no output any more. The issue happens at step 4. Multiple perf_event_open can be called successfully, but only one bpf prog pointer in the tp_event. In the current logic, any fd release for the same tp_event will free the tp_event->prog. The fix is to free tp_event->prog only when the closing fd corresponds to the one which registered the program. Signed-off-by: Yonghong Song Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

sctp: potential read out of bounds in sctp_ulpevent_type_enabled()

2017-10-12T09:51:20Z

[ Upstream commit fa5f7b51fc3080c2b195fa87c7eca7c05e56f673 ] This code causes a static checker warning because Smatch doesn't trust anything that comes from skb->data. I've reviewed this code and I do think skb->data can be controlled by the user here. The sctp_event_subscribe struct has 13 __u8 fields and we want to see if ours is non-zero. sn_type can be any value in the 0-USHRT_MAX range. We're subtracting SCTP_SN_TYPE_BASE which is 1 << 15 so we could read either before the start of the struct or after the end. This is a very old bug and it's surprising that it would go undetected for so long but my theory is that it just doesn't have a big impact so it would be hard to notice. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mm, oom_reaper: skip mm structs with mmu notifiers

2017-10-12T09:51:19Z

commit 4d4bbd8526a8fbeb2c090ea360211fceff952383 upstream. Andrea has noticed that the oom_reaper doesn't invalidate the range via mmu notifiers (mmu_notifier_invalidate_range_start/end) and that can corrupt the memory of the kvm guest for example. tlb_flush_mmu_tlbonly already invokes mmu notifiers but that is not sufficient as per Andrea: "mmu_notifier_invalidate_range cannot be used in replacement of mmu_notifier_invalidate_range_start/end. For KVM mmu_notifier_invalidate_range is a noop and rightfully so. A MMU notifier implementation has to implement either ->invalidate_range method or the invalidate_range_start/end methods, not both. And if you implement invalidate_range_start/end like KVM is forced to do, calling mmu_notifier_invalidate_range in common code is a noop for KVM. For those MMU notifiers that can get away only implementing ->invalidate_range, the ->invalidate_range is implicitly called by mmu_notifier_invalidate_range_end(). And only those secondary MMUs that share the same pagetable with the primary MMU (like AMD iommuv2) can get away only implementing ->invalidate_range" As the callback is allowed to sleep and the implementation is out of hand of the MM it is safer to simply bail out if there is an mmu notifier registered. In order to not fail too early make the mm_has_notifiers check under the oom_lock and have a little nap before failing to give the current oom victim some more time to exit. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170913113427.2291-1-mhocko@kernel.org Fixes: aac453635549 ("mm, oom: introduce oom reaper") Signed-off-by: Michal Hocko Reported-by: Andrea Arcangeli Reviewed-by: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

iio: ad_sigma_delta: Implement a dedicated reset function

2017-10-12T09:51:18Z

commit 7fc10de8d49a748c476532c9d8e8fe19e548dd67 upstream. Since most of the SD ADCs have the option of reseting the serial interface by sending a number of SCLKs with CS = 0 and DIN = 1, a dedicated function that can do this is usefull. Needed for the patch: iio: ad7793: Fix the serial interface reset Signed-off-by: Dragos Bogdan Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

USB: fix out-of-bounds in usb_set_configuration

2017-10-12T09:51:17Z

commit bd7a3fe770ebd8391d1c7d072ff88e9e76d063eb upstream. Andrey Konovalov reported a possible out-of-bounds problem for a USB interface association descriptor. He writes: It seems there's no proper size check of a USB_DT_INTERFACE_ASSOCIATION descriptor. It's only checked that the size is >= 2 in usb_parse_configuration(), so find_iad() might do out-of-bounds access to intf_assoc->bInterfaceCount. And he's right, we don't check for crazy descriptors of this type very well, so resolve this problem. Yet another issue found by syzkaller... Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Greg Kroah-Hartman