user/sven/linux.git/include, branch v5.0.19

bpf: add map_lookup_elem_sys_only for lookups from syscall side

2019-05-25T16:22:31Z

commit c6110222c6f49ea68169f353565eb865488a8619 upstream. Add a callback map_lookup_elem_sys_only() that map implementations could use over map_lookup_elem() from system call side in case the map implementation needs to handle the latter differently than from the BPF data path. If map_lookup_elem_sys_only() is set, this will be preferred pick for map lookups out of user space. This hook is used in a follow-up fix for LRU map, but once development window opens, we can convert other map types from map_lookup_elem() (here, the one called upon BPF_MAP_LOOKUP_ELEM cmd is meant) over to use the callback to simplify and clean up the latter. Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman

bpf: Fix preempt_enable_no_resched() abuse

2019-05-25T16:22:28Z

[ Upstream commit 0edd6b64d1939e9e9168ff27947995bb7751db5d ] Unless the very next line is schedule(), or implies it, one must not use preempt_enable_no_resched(). It can cause a preemption to go missing and thereby cause arbitrary delays, breaking the PREEMPT=y invariant. Cc: Roman Gushchin Cc: Alexei Starovoitov Cc: Daniel Borkmann Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin

xfrm: Honor original L3 slave device in xfrmi policy lookup

2019-05-25T16:22:22Z

[ Upstream commit 025c65e119bf58b610549ca359c9ecc5dee6a8d2 ] If an xfrmi is associated to a vrf layer 3 master device, xfrm_policy_check() fails after traffic decapsulation. The input interface is replaced by the layer 3 master device, and hence xfrmi_decode_session() can't match the xfrmi anymore to satisfy policy checking. Extend ingress xfrmi lookup to honor the original layer 3 slave device, allowing xfrm interfaces to operate within a vrf domain. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Martin Willi Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

xfrm: clean up xfrm protocol checks

2019-05-25T16:22:22Z

[ Upstream commit dbb2483b2a46fbaf833cfb5deb5ed9cace9c7399 ] In commit 6a53b7593233 ("xfrm: check id proto in validate_tmpl()") I introduced a check for xfrm protocol, but according to Herbert IPSEC_PROTO_ANY should only be used as a wildcard for lookup, so it should be removed from validate_tmpl(). And, IPSEC_PROTO_ANY is expected to only match 3 IPSec-specific protocols, this is why xfrm_state_flush() could still miss IPPROTO_ROUTING, which leads that those entries are left in net->xfrm.state_all before exit net. Fix this by replacing IPSEC_PROTO_ANY with zero. This patch also extracts the check from validate_tmpl() to xfrm_id_proto_valid() and uses it in parse_ipsecrequest(). With this, no other protocols should be added into xfrm. Fixes: 6a53b7593233 ("xfrm: check id proto in validate_tmpl()") Reported-by: syzbot+0bf0519d6e0de15914fe@syzkaller.appspotmail.com Cc: Steffen Klassert Cc: Herbert Xu Signed-off-by: Cong Wang Acked-by: Herbert Xu Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

fuse: Add FOPEN_STREAM to use stream_open()

2019-05-25T16:22:20Z

commit bbd84f33652f852ce5992d65db4d020aba21f882 upstream. Starting from commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") files opened even via nonseekable_open gate read and write via lock and do not allow them to be run simultaneously. This can create read vs write deadlock if a filesystem is trying to implement a socket-like file which is intended to be simultaneously used for both read and write from filesystem client. See commit 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock") for details and e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes to /proc/xen/xenbus") for a similar deadlock example on /proc/xen/xenbus. To avoid such deadlock it was tempting to adjust fuse_finish_open to use stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE, and in particular GVFS which actually uses offset in its read and write handlers https://codesearch.debian.net/search?q=-%3Enonseekable+%3D https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481 so if we would do such a change it will break a real user. Add another flag (FOPEN_STREAM) for filesystem servers to indicate that the opened handler is having stream-like semantics; does not use file position and thus the kernel is free to issue simultaneous read and write request on opened file handle. This patch together with stream_open() should be added to stable kernels starting from v3.14+. This will allow to patch OSSPD and other FUSE filesystems that provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE in open handler and this way avoid the deadlock on all kernel versions. This should work because fuse_finish_open ignores unknown open flags returned from a filesystem and so passing FOPEN_STREAM to a kernel that is not aware of this flag cannot hurt. In turn the kernel that is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE is sufficient to implement streams without read vs write deadlock. Cc: stable@vger.kernel.org # v3.14+ Signed-off-by: Kirill Smelkov Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman

PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratum

2019-05-25T16:22:18Z

commit 4ec73791a64bab25cabf16a6067ee478692e506d upstream. Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode (conventional PCI on primary side, PCIe on downstream side), the Retrain Link bit needs to be cleared manually to allow the link training to complete successfully. If it is not cleared manually, the link training is continuously restarted and no devices below the PCI-to-PCIe bridge can be accessed. That means drivers for devices below the bridge will be loaded but won't work and may even crash because the driver is only reading 0xffff. See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for details. Devices known as affected so far are: PI7C9X110, PI7C9X111SL, PI7C9X130. Add a new flag, clear_retrain_link, in struct pci_dev. Quirks for affected devices set this bit. Note that pcie_retrain_link() lives in aspm.c because that's currently the only place we use it, but this erratum is not specific to ASPM, and we may retrain links for other reasons in the future. Signed-off-by: Stefan Mätje [bhelgaas: apply regardless of CONFIG_PCIEASPM] Signed-off-by: Bjorn Helgaas Reviewed-by: Andy Shevchenko CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

x86/mpx, mm/core: Fix recursive munmap() corruption

2019-05-25T16:22:14Z

commit 5a28fc94c9143db766d1ba5480cae82d856ad080 upstream. This is a bit of a mess, to put it mildly. But, it's a bug that only seems to have showed up in 4.20 but wasn't noticed until now, because nobody uses MPX. MPX has the arch_unmap() hook inside of munmap() because MPX uses bounds tables that protect other areas of memory. When memory is unmapped, there is also a need to unmap the MPX bounds tables. Barring this, unused bounds tables can eat 80% of the address space. But, the recursive do_munmap() that gets called vi arch_unmap() wreaks havoc with __do_munmap()'s state. It can result in freeing populated page tables, accessing bogus VMA state, double-freed VMAs and more. See the "long story" further below for the gory details. To fix this, call arch_unmap() before __do_unmap() has a chance to do anything meaningful. Also, remove the 'vma' argument and force the MPX code to do its own, independent VMA lookup. == UML / unicore32 impact == Remove unused 'vma' argument to arch_unmap(). No functional change. I compile tested this on UML but not unicore32. == powerpc impact == powerpc uses arch_unmap() well to watch for munmap() on the VDSO and zeroes out 'current->mm->context.vdso_base'. Moving arch_unmap() makes this happen earlier in __do_munmap(). But, 'vdso_base' seems to only be used in perf and in the signal delivery that happens near the return to userspace. I can not find any likely impact to powerpc, other than the zeroing happening a little earlier. powerpc does not use the 'vma' argument and is unaffected by its removal. I compile-tested a 64-bit powerpc defconfig. == x86 impact == For the common success case this is functionally identical to what was there before. For the munmap() failure case, it's possible that some MPX tables will be zapped for memory that continues to be in use. But, this is an extraordinarily unlikely scenario and the harm would be that MPX provides no protection since the bounds table got reset (zeroed). I can't imagine anyone doing this: ptr = mmap(); // use ptr ret = munmap(ptr); if (ret) // oh, there was an error, I'll // keep using ptr. Because if you're doing munmap(), you are *done* with the memory. There's probably no good data in there _anyway_. This passes the original reproducer from Richard Biener as well as the existing mpx selftests/. The long story: munmap() has a couple of pieces: 1. Find the affected VMA(s) 2. Split the start/end one(s) if neceesary 3. Pull the VMAs out of the rbtree 4. Actually zap the memory via unmap_region(), including freeing page tables (or queueing them to be freed). 5. Fix up some of the accounting (like fput()) and actually free the VMA itself. This specific ordering was actually introduced by: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") during the 4.20 merge window. The previous __do_munmap() code was actually safe because the only thing after arch_unmap() was remove_vma_list(). arch_unmap() could not see 'vma' in the rbtree because it was detached, so it is not even capable of doing operations unsafe for remove_vma_list()'s use of 'vma'. Richard Biener reported a test that shows this in dmesg: [1216548.787498] BUG: Bad rss-counter state mm:0000000017ce560b idx:1 val:551 [1216548.787500] BUG: non-zero pgtables_bytes on freeing mm: 24576 What triggered this was the recursive do_munmap() called via arch_unmap(). It was freeing page tables that has not been properly zapped. But, the problem was bigger than this. For one, arch_unmap() can free VMAs. But, the calling __do_munmap() has variables that *point* to VMAs and obviously can't handle them just getting freed while the pointer is still in use. I tried a couple of things here. First, I tried to fix the page table freeing problem in isolation, but I then found the VMA issue. I also tried having the MPX code return a flag if it modified the rbtree which would force __do_munmap() to re-walk to restart. That spiralled out of control in complexity pretty fast. Just moving arch_unmap() and accepting that the bonkers failure case might eat some bounds tables seems like the simplest viable fix. This was also reported in the following kernel bugzilla entry: https://bugzilla.kernel.org/show_bug.cgi?id=203123 There are some reports that this commit triggered this bug: dd2283f2605 ("mm: mmap: zap pages with read mmap_sem in munmap") While that commit certainly made the issues easier to hit, I believe the fundamental issue has been with us as long as MPX itself, thus the Fixes: tag below is for one of the original MPX commits. [ mingo: Minor edits to the changelog and the patch. ] Reported-by: Richard Biener Reported-by: H.J. Lu Signed-off-by: Dave Hansen Reviewed-by Thomas Gleixner Reviewed-by: Yang Shi Acked-by: Michael Ellerman Cc: Andrew Morton Cc: Andy Lutomirski Cc: Anton Ivanov Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Guan Xuetao Cc: H. Peter Anvin Cc: Jeff Dike Cc: Linus Torvalds Cc: Michal Hocko Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Richard Weinberger Cc: Rik van Riel Cc: Vlastimil Babka Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-um@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: stable@vger.kernel.org Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Link: http://lkml.kernel.org/r/20190419194747.5E1AD6DC@viggo.jf.intel.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

udlfb: introduce a rendering mutex

2019-05-25T16:22:09Z

commit babc250e278eac7b0e671bdaedf833759b43bb78 upstream. Rendering calls may be done simultaneously from the workqueue, dlfb_ops_write, dlfb_ops_ioctl, dlfb_ops_set_par and dlfb_dpy_deferred_io. The code is robust enough so that it won't crash on concurrent rendering. However, concurrent rendering may cause display corruption if the same pixel is simultaneously being rendered. In order to avoid this corruption, this patch adds a mutex around the rendering calls. Signed-off-by: Mikulas Patocka Cc: Bernie Thompson Cc: Ladislav Michl Cc: [b.zolnierkie: replace "dlfb:" with "uldfb:" in the patch summary] Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman

udlfb: fix sleeping inside spinlock

2019-05-25T16:22:09Z

commit 6b11f9d8433b471fdd3ebed232b43a4b723be6ff upstream. If a framebuffer device is used as a console, the rendering calls (copyarea, fillrect, imageblit) may be done with the console spinlock held. On udlfb, these function call dlfb_handle_damage that takes a blocking semaphore before acquiring an URB. In order to fix the bug, this patch changes the calls copyarea, fillrect and imageblit to offload USB work to a workqueue. A side effect of this patch is 3x improvement in console scrolling speed because the device doesn't have to be updated after each copyarea call. Signed-off-by: Mikulas Patocka Cc: Bernie Thompson Cc: Ladislav Michl Cc: Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman

RDMA/mlx5: Use get_zeroed_page() for clock_info

2019-05-25T16:22:06Z

commit ddcdc368b1033e19fd3a5f750752e10e28a87826 upstream. get_zeroed_page() returns a virtual address for the page which is better than allocating a struct page and doing a permanent kmap on it. Cc: stable@vger.kernel.org Signed-off-by: Jason Gunthorpe Reviewed-by: Haggai Eran Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman