user/sven/linux.git/include, branch v5.10.124

Revert "PCI: Make pci_enable_ptm() private"

2022-06-22T12:13:20Z

commit 1d71eb53e45187f58089d32b51e27784c791d90e upstream. Make pci_enable_ptm() accessible from the drivers. Exposing this to the driver enables the driver to use the 'ptm_enabled' field of 'pci_dev' to check if PTM is enabled or not. This reverts commit ac6c26da29c1 ("PCI: Make pci_enable_ptm() private"). Signed-off-by: Vinicius Costa Gomes Acked-by: Bjorn Helgaas Signed-off-by: Tony Nguyen Signed-off-by: Meng Tang Signed-off-by: Greg Kroah-Hartman

x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data

2022-06-16T11:27:59Z

commit 8d50cdf8b8341770bc6367bce40c0c1bb0e1d5b3 upstream Add the sysfs reporting file for Processor MMIO Stale Data vulnerability. It exposes the vulnerability and mitigation state similar to the existing files for the other hardware vulnerabilities. Signed-off-by: Pawan Gupta Signed-off-by: Borislav Petkov Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

nodemask: Fix return values to be unsigned

2022-06-14T16:32:45Z

[ Upstream commit 0dfe54071d7c828a02917b595456bfde1afdddc9 ] The nodemask routines had mixed return values that provided potentially signed return values that could never happen. This was leading to the compiler getting confusing about the range of possible return values (it was thinking things could be negative where they could not be). Fix all the nodemask routines that should be returning unsigned (or bool) values. Silences: mm/swapfile.c: In function ‘setup_swap_info’: mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds of ‘struct plist_node[]’ [-Werror=array-bounds] 2291 | p->avail_lists[i].prio = 1; | ~~~~~~~~~~~~~~^~~ In file included from mm/swapfile.c:16: ./include/linux/swap.h:292:27: note: while referencing ‘avail_lists’ 292 | struct plist_node avail_lists[]; /* | ^~~~~~~~~~~ Reported-by: Christophe de Dinechin Link: https://lore.kernel.org/lkml/20220414150855.2407137-3-dinechin@redhat.com/ Cc: Alexey Dobriyan Cc: Yury Norov Cc: Andy Shevchenko Cc: Rasmus Villemoes Cc: Andrew Morton Cc: Zhen Lei Signed-off-by: Kees Cook Signed-off-by: Yury Norov Signed-off-by: Sasha Levin

jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds

2022-06-14T16:32:44Z

[ Upstream commit 656d054e0a15ec327bd82801ccd58201e59f6896 ] When building x86_64 with JUMP_LABEL=n it's possible for instrumentation to sneak into noinstr: vmlinux.o: warning: objtool: exit_to_user_mode+0x14: call to static_key_count.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: syscall_exit_to_user_mode+0x2d: call to static_key_count.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: irqentry_exit_to_user_mode+0x1b: call to static_key_count.constprop.0() leaves .noinstr.text section Switch to arch_ prefixed atomic to avoid the explicit instrumentation. Reported-by: kernel test robot Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Sasha Levin

iio: st_sensors: Add a local lock for protecting odr

2022-06-14T16:32:41Z

[ Upstream commit 474010127e2505fc463236470908e1ff5ddb3578 ] Right now the (framework) mlock lock is (ab)used for multiple purposes: 1- protecting concurrent accesses over the odr local cache 2- avoid changing samplig frequency whilst buffer is running Let's start by handling situation #1 with a local lock. Suggested-by: Jonathan Cameron Cc: Denis Ciocca Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20220207143840.707510-7-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

netfilter: nf_tables: bail out early if hardware offload is not supported

2022-06-14T16:32:40Z

[ Upstream commit 3a41c64d9c1185a2f3a184015e2a9b78bfc99c71 ] If user requests for NFT_CHAIN_HW_OFFLOAD, then check if either device provides the .ndo_setup_tc interface or there is an indirect flow block that has been registered. Otherwise, bail out early from the preparation phase. Moreover, validate that family == NFPROTO_NETDEV and hook is NF_NETDEV_INGRESS. Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: nf_tables: delete flowtable hooks via transaction list

2022-06-14T16:32:39Z

[ Upstream commit b6d9014a3335194590abdd2a2471ef5147a67645 ] Remove inactive bool field in nft_hook object that was introduced in abadb2f865d7 ("netfilter: nf_tables: delete devices from flowtable"). Move stale flowtable hooks to transaction list instead. Deleting twice the same device does not result in ENOENT. Fixes: abadb2f865d7 ("netfilter: nf_tables: delete devices from flowtable") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

net: sched: add barrier to fix packet stuck problem for lockless qdisc

2022-06-14T16:32:36Z

[ Upstream commit 2e8728c955ce0624b958eee6e030a37aca3a5d86 ] In qdisc_run_end(), the spin_unlock() only has store-release semantic, which guarantees all earlier memory access are visible before it. But the subsequent test_bit() has no barrier semantics so may be reordered ahead of the spin_unlock(). The store-load reordering may cause a packet stuck problem. The concurrent operations can be described as below, CPU 0 | CPU 1 qdisc_run_end() | qdisc_run_begin() . | . ----> /* may be reorderd here */ | . | . | . | spin_unlock() | set_bit() | . | smp_mb__after_atomic() ---- test_bit() | spin_trylock() . | . Consider the following sequence of events: CPU 0 reorder test_bit() ahead and see MISSED = 0 CPU 1 calls set_bit() CPU 1 calls spin_trylock() and return fail CPU 0 executes spin_unlock() At the end of the sequence, CPU 0 calls spin_unlock() and does nothing because it see MISSED = 0. The skb on CPU 1 has beed enqueued but no one take it, until the next cpu pushing to the qdisc (if ever ...) will notice and dequeue it. This patch fix this by adding one explicit barrier. As spin_unlock() and test_bit() ordering is a store-load ordering, a full memory barrier smp_mb() is needed here. Fixes: a90c57f2cedd ("net: sched: fix packet stuck problem for lockless qdisc") Signed-off-by: Guoju Fang Link: https://lore.kernel.org/r/20220528101628.120193-1-gjfang@linux.alibaba.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/mlx5: correct ECE offset in query qp output

2022-06-14T16:32:36Z

[ Upstream commit 3fc2a9e89b3508a5cc0c324f26d7b4740ba8c456 ] ECE field should be after opt_param_mask in query qp output. Fixes: 6b646a7e4af6 ("net/mlx5: Add ability to read and write ECE options") Signed-off-by: Changcheng Liu Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

net: sched: fixed barrier to prevent skbuff sticking in qdisc backlog

2022-06-14T16:32:35Z

[ Upstream commit a54ce3703613e41fe1d98060b62ec09a3984dc28 ] In qdisc_run_begin(), smp_mb__before_atomic() used before test_bit() does not provide any ordering guarantee as test_bit() is not an atomic operation. This, added to the fact that the spin_trylock() call at the beginning of qdisc_run_begin() does not guarantee acquire semantics if it does not grab the lock, makes it possible for the following statement : if (test_bit(__QDISC_STATE_MISSED, &qdisc->state)) to be executed before an enqueue operation called before qdisc_run_begin(). As a result the following race can happen : CPU 1 CPU 2 qdisc_run_begin() qdisc_run_begin() /* true */ set(MISSED) . /* returns false */ . . /* sees MISSED = 1 */ . /* so qdisc not empty */ . __qdisc_run() . . . pfifo_fast_dequeue() ----> /* may be done here */ . | . clear(MISSED) | . . | . smp_mb __after_atomic(); | . . | . /* recheck the queue */ | . /* nothing => exit */ | enqueue(skb1) | . | qdisc_run_begin() | . | spin_trylock() /* fail */ | . | smp_mb__before_atomic() /* not enough */ | . ---- if (test_bit(MISSED)) return false; /* exit */ In the above scenario, CPU 1 and CPU 2 both try to grab the qdisc->seqlock at the same time. Only CPU 2 succeeds and enters the bypass code path, where it emits its skb then calls __qdisc_run(). CPU1 fails, sets MISSED and goes down the traditionnal enqueue() + dequeue() code path. But when executing qdisc_run_begin() for the second time, after enqueuing its skbuff, it sees the MISSED bit still set (by itself) and consequently chooses to exit early without setting it again nor trying to grab the spinlock again. Meanwhile CPU2 has seen MISSED = 1, cleared it, checked the queue and found it empty, so it returned. At the end of the sequence, we end up with skb1 enqueued in the backlog, both CPUs out of __dev_xmit_skb(), the MISSED bit not set, and no __netif_schedule() called made. skb1 will now linger in the qdisc until somebody later performs a full __qdisc_run(). Associated to the bypass capacity of the qdisc, and the ability of the TCP layer to avoid resending packets which it knows are still in the qdisc, this can lead to serious traffic "holes" in a TCP connection. We fix this by replacing the smp_mb__before_atomic() / test_bit() / set_bit() / smp_mb__after_atomic() sequence inside qdisc_run_begin() by a single test_and_set_bit() call, which is more concise and enforces the needed memory barriers. Fixes: 89837eb4b246 ("net: sched: add barrier to ensure correct ordering for lockless qdisc") Signed-off-by: Vincent Ray Signed-off-by: Eric Dumazet Link: https://lore.kernel.org/r/20220526001746.2437669-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin