user/sven/linux.git/include, branch v5.10.147

serial: Create uart_xmit_advance()

2022-09-28T09:10:37Z

commit e77cab77f2cb3a1ca2ba8df4af45bb35617ac16d upstream. A very common pattern in the drivers is to advance xmit tail index and do bookkeeping of Tx'ed characters. Create uart_xmit_advance() to handle it. Reviewed-by: Andy Shevchenko Cc: stable Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220901143934.8850-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

net: socket: remove register_gifconf

2022-09-28T09:10:35Z

[ Upstream commit b0e99d03778b2418aec20db99d97d19d25d198b6 ] Since dynamic registration of the gifconf() helper is only used for IPv4, and this can not be in a loadable module, this can be simplified noticeably by turning it into a direct function call as a preparation for cleaning up the compat handling. Signed-off-by: Arnd Bergmann Reviewed-by: Christoph Hellwig Signed-off-by: David S. Miller Stable-dep-of: 5641c751fe2f ("net: enetc: deny offload of tc-based TSN features on VF interfaces") Signed-off-by: Sasha Levin

net: bonding: Share lacpdu_mcast_addr definition

2022-09-28T09:10:31Z

[ Upstream commit 1d9a143ee3408349700f44a9197b7ae0e4faae5d ] There are already a few definitions of arrays containing MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all contain the same constant data so define one common instance for all bonding code. Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller Stable-dep-of: 86247aba599e ("net: bonding: Unsync device addresses on ndo_stop") Signed-off-by: Sasha Levin

KVM: SEV: add cache flush to solve SEV cache incoherency issues

2022-09-28T09:10:28Z

commit 683412ccf61294d727ead4a73d97397396e69a6b upstream. Flush the CPU caches when memory is reclaimed from an SEV guest (where reclaim also includes it being unmapped from KVM's memslots). Due to lack of coherency for SEV encrypted memory, failure to flush results in silent data corruption if userspace is malicious/broken and doesn't ensure SEV guest memory is properly pinned and unpinned. Cache coherency is not enforced across the VM boundary in SEV (AMD APM vol.2 Section 15.34.7). Confidential cachelines, generated by confidential VM guests have to be explicitly flushed on the host side. If a memory page containing dirty confidential cachelines was released by VM and reallocated to another user, the cachelines may corrupt the new user at a later time. KVM takes a shortcut by assuming all confidential memory remain pinned until the end of VM lifetime. Therefore, KVM does not flush cache at mmu_notifier invalidation events. Because of this incorrect assumption and the lack of cache flushing, malicous userspace can crash the host kernel: creating a malicious VM and continuously allocates/releases unpinned confidential memory pages when the VM is running. Add cache flush operations to mmu_notifier operations to ensure that any physical memory leaving the guest VM get flushed. In particular, hook mmu_notifier_invalidate_range_start and mmu_notifier_release events and flush cache accordingly. The hook after releasing the mmu lock to avoid contention with other vCPUs. Cc: stable@vger.kernel.org Suggested-by: Sean Christpherson Reported-by: Mingwei Zhang Signed-off-by: Mingwei Zhang Message-Id: <20220421031407.2516575-4-mizhang@google.com> Signed-off-by: Paolo Bonzini [OP: applied kvm_arch_guest_memory_reclaimed() calls in kvm_set_memslot() and kvm_mmu_notifier_invalidate_range_start(); OP: adjusted kvm_arch_guest_memory_reclaimed() to not use static_call_cond()] Signed-off-by: Ovidiu Panait Reviewed-by: Liam Merwick Signed-off-by: Greg Kroah-Hartman

of/device: Fix up of_dma_configure_id() stub

2022-09-23T12:16:58Z

commit 40bfe7a86d84cf08ac6a8fe2f0c8bf7a43edd110 upstream. Since the stub version of of_dma_configure_id() was added in commit a081bd4af4ce ("of/device: Add input id to of_dma_configure()"), it has not matched the signature of the full function, leading to build failure reports when code using this function is built on !OF configurations. Fixes: a081bd4af4ce ("of/device: Add input id to of_dma_configure()") Cc: stable@vger.kernel.org Signed-off-by: Thierry Reding Reviewed-by: Frank Rowand Acked-by: Lorenzo Pieralisi Link: https://lore.kernel.org/r/20220824153256.1437483-1-thierry.reding@gmail.com Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

debugfs: add debugfs_lookup_and_remove()

2022-09-15T09:32:03Z

commit dec9b2f1e0455a151a7293c367da22ab973f713e upstream. There is a very common pattern of using debugfs_remove(debufs_lookup(..)) which results in a dentry leak of the dentry that was looked up. Instead of having to open-code the correct pattern of calling dput() on the dentry, create debugfs_lookup_and_remove() to handle this pattern automatically and properly without any memory leaks. Cc: stable Reported-by: Kuyo Chang Tested-by: Kuyo Chang Link: https://lore.kernel.org/r/YxIaQ8cSinDR881k@kroah.com Signed-off-by: Greg Kroah-Hartman

fs: only do a memory barrier for the first set_buffer_uptodate()

2022-09-15T09:32:02Z

commit 2f79cdfe58c13949bbbb65ba5926abfe9561d0ec upstream. Commit d4252071b97d ("add barriers to buffer_uptodate and set_buffer_uptodate") added proper memory barriers to the buffer head BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date will be guaranteed to actually see initialized state. However, that commit didn't _just_ add the memory barrier, it also ended up dropping the "was it already set" logic that the BUFFER_FNS() macro had. That's conceptually the right thing for a generic "this is a memory barrier" operation, but in the case of the buffer contents, we really only care about the memory barrier for the _first_ time we set the bit, in that the only memory ordering protection we need is to avoid anybody seeing uninitialized memory contents. Any other access ordering wouldn't be about the BH_Uptodate bit anyway, and would require some other proper lock (typically BH_Lock or the folio lock). A reader that races with somebody invalidating the buffer head isn't an issue wrt the memory ordering, it's a serialization issue. Now, you'd think that the buffer head operations don't matter in this day and age (and I certainly thought so), but apparently some loads still end up being heavy users of buffer heads. In particular, the kernel test robot reported that not having this bit access optimization in place caused a noticeable direct IO performance regression on ext4: fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression although you presumably need a fast disk and a lot of cores to actually notice. Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/ Reported-by: kernel test robot Tested-by: Fengwei Yin Cc: Mikulas Patocka Cc: Matthew Wilcox (Oracle) Cc: stable@kernel.org Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

USB: core: Prevent nested device-reset calls

2022-09-08T09:11:40Z

commit 9c6d778800b921bde3bff3cff5003d1650f942d1 upstream. Automatic kernel fuzzing revealed a recursive locking violation in usb-storage: ============================================ WARNING: possible recursive locking detected 5.18.0 #3 Not tainted -------------------------------------------- kworker/1:3/1205 is trying to acquire lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 but task is already holding lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 ... stack backtrace: CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2988 [inline] check_deadlock kernel/locking/lockdep.c:3031 [inline] validate_chain kernel/locking/lockdep.c:3816 [inline] __lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053 lock_acquire kernel/locking/lockdep.c:5665 [inline] lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630 __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747 usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109 r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622 usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458 device_remove drivers/base/dd.c:545 [inline] device_remove+0x11f/0x170 drivers/base/dd.c:537 __device_release_driver drivers/base/dd.c:1222 [inline] device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248 usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627 usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118 usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114 This turned out not to be an error in usb-storage but rather a nested device reset attempt. That is, as the rtl8712 driver was being unbound from a composite device in preparation for an unrelated USB reset (that driver does not have pre_reset or post_reset callbacks), its ->remove routine called usb_reset_device() -- thus nesting one reset call within another. Performing a reset as part of disconnect processing is a questionable practice at best. However, the bug report points out that the USB core does not have any protection against nested resets. Adding a reset_in_progress flag and testing it will prevent such errors in the future. Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/ Cc: stable@vger.kernel.org Reported-and-tested-by: Rondreis Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles

2022-09-08T09:11:39Z

commit c1e5c2f0cb8a22ec2e14af92afc7006491bebabb upstream. Fix incorrect pin assignment values when connecting to a monitor with Type-C receptacle instead of a plug. According to specification, an UFP_D receptacle's pin assignment should came from the UFP_D pin assignments field (bit 23:16), while an UFP_D plug's assignments are described in the DFP_D pin assignments (bit 15:8) during Mode Discovery. For example the LG 27 UL850-W is a monitor with Type-C receptacle. The monitor responds to MODE DISCOVERY command with following DisplayPort Capability flag: dp->alt->vdo=0x140045 The existing logic only take cares of UPF_D plug case, and would take the bit 15:8 for this 0x140045 case. This results in an non-existing pin assignment 0x0 in dp_altmode_configure. To fix this problem a new set of macros are introduced to take plug/receptacle differences into consideration. Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Co-developed-by: Pablo Sun Co-developed-by: Macpaul Lin Reviewed-by: Guillaume Ranquet Reviewed-by: Heikki Krogerus Signed-off-by: Pablo Sun Signed-off-by: Macpaul Lin Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman

platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask

2022-09-08T09:11:36Z

[ Upstream commit 0a90ed8d0cfa29735a221eba14d9cb6c735d35b6 ] On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI specification (see Table 4.13 "PM1 Control Registers Fixed Hardware Feature Control Bits" for the details). Fix the mask and other related definitions accordingly. Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver") Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Sasha Levin