user/sven/linux.git/include, branch v5.15.57

objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}

2022-07-23T10:54:08Z

commit 8faea26e611189e933ea2281975ff4dc7c1106b6 upstream. Commit c536ed2fffd5 ("objtool: Remove SAVE/RESTORE hints") removed the save/restore unwind hints because they were no longer needed. Now they're going to be needed again so re-add them. Signed-off-by: Josh Poimboeuf Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

objtool: Add entry UNRET validation

2022-07-23T10:54:06Z

commit a09a6e2399ba0595c3042b3164f3ca68a3cff33e upstream. Since entry asm is tricky, add a validation pass that ensures the retbleed mitigation has been done before the first actual RET instruction. Entry points are those that either have UNWIND_HINT_ENTRY, which acts as UNWIND_HINT_EMPTY but marks the instruction as an entry point, or those that have UWIND_HINT_IRET_REGS at +0. This is basically a variant of validate_branch() that is intra-function and it will simply follow all branches from marked entry points and ensures that all paths lead to ANNOTATE_UNRET_END. If a path hits RET or an indirection the path is a fail and will be reported. There are 3 ANNOTATE_UNRET_END instances: - UNTRAIN_RET itself - exception from-kernel; this path doesn't need UNTRAIN_RET - all early exceptions; these also don't need UNTRAIN_RET Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Josh Poimboeuf Signed-off-by: Borislav Petkov [cascardo: tools/objtool/builtin-check.c no link option validation] [cascardo: tools/objtool/check.c opts.ibt is ibt] [cascardo: tools/objtool/include/objtool/builtin.h leave unret option as bool, no struct opts] [cascardo: objtool is still called from scripts/link-vmlinux.sh] [cascardo: no IBT support] Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

x86/bugs: Report AMD retbleed vulnerability

2022-07-23T10:54:02Z

commit 6b80b59b3555706508008f1f127b5412c89c7fd8 upstream. Report that AMD x86 CPUs are vulnerable to the RETBleed (Arbitrary Speculative Code Execution with Return Instructions) attack. [peterz: add hygon] [kim: invert parity; fam15h] Co-developed-by: Kim Phillips Signed-off-by: Kim Phillips Signed-off-by: Alexandre Chartre Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Josh Poimboeuf Signed-off-by: Borislav Petkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

x86/kvm/vmx: Make noinstr clean

2022-07-23T10:53:57Z

commit 742ab6df974ae8384a2dd213db1a3a06cf6d8936 upstream. The recent mmio_stale_data fixes broke the noinstr constraints: vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x15b: call to wrmsrl.constprop.0() leaves .noinstr.text section vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x1bf: call to kvm_arch_has_assigned_device() leaves .noinstr.text section make it all happy again. Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

serial: 8250: Fix PM usage_count for console handover

2022-07-21T19:24:43Z

commit f9b11229b79c0fb2100b5bb4628a101b1d37fbf6 upstream. When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because 82586a721595 ("PM: runtime: Avoid device usage count underflows") added the warning printout. I confirmed this problem also occurs with v5.18 (w/o the warning printout, obviously). Fixes: bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console") Cc: stable Tested-by: Tony Lindgren Reviewed-by: Andy Shevchenko Reviewed-by: Tony Lindgren Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/b4f428e9-491f-daf2-2232-819928dc276e@linux.intel.com Signed-off-by: Greg Kroah-Hartman

firmware: sysfb: Add sysfb_disable() helper function

2022-07-21T19:24:35Z

[ Upstream commit bde376e9de3c0bc55eedc8956b0f114c05531595 ] This can be used by subsystems to unregister a platform device registered by sysfb and also to disable future platform device registration in sysfb. Suggested-by: Daniel Vetter Signed-off-by: Javier Martinez Canillas Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-3-javierm@redhat.com Signed-off-by: Sasha Levin

firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer

2022-07-21T19:24:34Z

[ Upstream commit 9e121040e54abef9ed5542e5fdfa87911cd96204 ] This function just returned 0 on success or an errno code on error, but it could be useful for sysfb_init() callers to have a pointer to the device. Signed-off-by: Javier Martinez Canillas Reviewed-by: Daniel Vetter Reviewed-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20220607182338.344270-2-javierm@redhat.com Signed-off-by: Sasha Levin

net/tls: Check for errors in tls_device_init

2022-07-21T19:24:31Z

[ Upstream commit 3d8c51b25a235e283e37750943bbf356ef187230 ] Add missing error checks in tls_device_init. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Reported-by: Jakub Kicinski Reviewed-by: Maxim Mikityanskiy Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20220714070754.1428-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ima: force signature verification when CONFIG_KEXEC_SIG is configured

2022-07-21T19:24:29Z

[ Upstream commit af16df54b89dee72df253abc5e7b5e8a6d16c11c ] Currently, an unsigned kernel could be kexec'ed when IMA arch specific policy is configured unless lockdown is enabled. Enforce kernel signature verification check in the kexec_file_load syscall when IMA arch specific policy is configured. Fixes: 99d5cadfde2b ("kexec_file: split KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE") Reported-and-suggested-by: Mimi Zohar Signed-off-by: Coiby Xu Signed-off-by: Mimi Zohar Signed-off-by: Sasha Levin

raw: Fix a data-race around sysctl_raw_l3mdev_accept.

2022-07-21T19:24:27Z

[ Upstream commit 1dace014928e6e385363032d359a04dee9158af0 ] While reading sysctl_raw_l3mdev_accept, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 6897445fb194 ("net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs") Signed-off-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin