user/sven/linux.git/include, branch v5.15.6

net: ipv6: add fib6_nh_release_dsts stub

2021-12-01T08:04:49Z

[ Upstream commit 8837cbbf854246f5f4d565f21e6baa945d37aded ] We need a way to release a fib6_nh's per-cpu dsts when replacing nexthops otherwise we can end up with stale per-cpu dsts which hold net device references, so add a new IPv6 stub called fib6_nh_release_dsts. It must be used after an RCU grace period, so no new dsts can be created through a group's nexthop entry. Similar to fib6_nh_release it shouldn't be used if fib6_nh_init has failed so it doesn't need a dummy stub when IPv6 is not enabled. Fixes: 7bf4796dd099 ("nexthops: add support for replace") Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: ieee802154: handle iftypes as u32

2021-12-01T08:04:46Z

[ Upstream commit 451dc48c806a7ce9fbec5e7a24ccf4b2c936e834 ] This patch fixes an issue that an u32 netlink value is handled as a signed enum value which doesn't fit into the range of u32 netlink type. If it's handled as -1 value some BIT() evaluation ends in a shift-out-of-bounds issue. To solve the issue we set the to u32 max which is s32 "-1" value to keep backwards compatibility and let the followed enum values start counting at 0. This brings the compiler to never handle the enum as signed and a check if the value is above NL802154_IFTYPE_MAX should filter -1 out. Fixes: f3ea5e44231a ("ieee802154: add new interface command") Signed-off-by: Alexander Aring Link: https://lore.kernel.org/r/20211112030916.685793-1-aahringo@redhat.com Signed-off-by: Stefan Schmidt Signed-off-by: Sasha Levin

ALSA: hda: hdac_ext_stream: fix potential locking issues

2021-11-25T08:49:08Z

commit 868ddfcef31ff93ea8961b2e81ea7fe12f6f144b upstream. The code for hdac_ext_stream seems inherited from hdac_stream, and similar locking issues are present: the use of the bus->reg_lock spinlock is inconsistent, with only writes to specific fields being protected. Apply similar fix as in hdac_stream by protecting all accesses to 'link_locked' and 'decoupled' fields, with a new helper snd_hdac_ext_stream_decouple_locked() added to simplify code changes. Signed-off-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20210924192417.169243-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

net: add and use skb_unclone_keeptruesize() helper

2021-11-25T08:49:08Z

commit c4777efa751d293e369aec464ce6875e957be255 upstream. While commit 097b9146c0e2 ("net: fix up truesize of cloned skb in skb_prepare_for_shift()") fixed immediate issues found when KFENCE was enabled/tested, there are still similar issues, when tcp_trim_head() hits KFENCE while the master skb is cloned. This happens under heavy networking TX workloads, when the TX completion might be delayed after incoming ACK. This patch fixes the WARNING in sk_stream_kill_queues when sk->sk_mem_queued/sk->sk_forward_alloc are not zero. Fixes: d3fb45f370d9 ("mm, kfence: insert KFENCE hooks for SLAB") Signed-off-by: Eric Dumazet Acked-by: Marco Elver Link: https://lore.kernel.org/r/20211102004555.1359210-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

fs: export an inode_update_time helper

2021-11-25T08:49:08Z

commit e60feb445fce9e51c1558a6aa7faf9dd5ded533b upstream. If you already have an inode and need to update the time on the inode there is no way to do this properly. Export this helper to allow file systems to update time on the inode so the appropriate handler is called, either ->update_time or generic_update_time. Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

RDMA/netlink: Add __maybe_unused to static inline in C file

2021-11-25T08:49:07Z

commit 83dde7498fefeb920b1def317421262317d178e5 upstream. Like other commits in the tree add __maybe_unused to a static inline in a C file because some clang compilers will complain about unused code: >> drivers/infiniband/core/nldev.c:2543:1: warning: unused function '__chk_RDMA_NL_NLDEV' MODULE_ALIAS_RDMA_NETLINK(RDMA_NL_NLDEV, 5); ^ Fixes: e3bf14bdc17a ("rdma: Autoload netlink client modules") Link: https://lore.kernel.org/r/4a8101919b765e01d7fde6f27fd572c958deeb4a.1636267207.git.leonro@nvidia.com Reported-by: kernel test robot Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

signal: Replace force_fatal_sig with force_exit_sig when in doubt

2021-11-25T08:49:07Z

commit fcb116bc43c8c37c052530ead79872f8b2615711 upstream. Recently to prevent issues with SECCOMP_RET_KILL and similar signals being changed before they are delivered SA_IMMUTABLE was added. Unfortunately this broke debuggers[1][2] which reasonably expect to be able to trap synchronous SIGTRAP and SIGSEGV even when the target process is not configured to handle those signals. Add force_exit_sig and use it instead of force_fatal_sig where historically the code has directly called do_exit. This has the implementation benefits of going through the signal exit path (including generating core dumps) without the danger of allowing userspace to ignore or change these signals. This avoids userspace regressions as older kernels exited with do_exit which debuggers also can not intercept. In the future is should be possible to improve the quality of implementation of the kernel by changing some of these force_exit_sig calls to force_fatal_sig. That can be done where it matters on a case-by-case basis with careful analysis. Reported-by: Kyle Huey Reported-by: kernel test robot [1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com [2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook Tested-by: Kees Cook Tested-by: Kyle Huey Signed-off-by: "Eric W. Biederman" Cc: Thomas Backlund Signed-off-by: Greg Kroah-Hartman

signal: Implement force_fatal_sig

2021-11-25T08:49:06Z

commit 26d5badbccddcc063dc5174a2baffd13a23322aa upstream. Add a simple helper force_fatal_sig that causes a signal to be delivered to a process as if the signal handler was set to SIG_DFL. Reimplement force_sigsegv based upon this new helper. This fixes force_sigsegv so that when it forces the default signal handler to be used the code now forces the signal to be unblocked as well. Reusing the tested logic in force_sig_info_to_task that was built for force_sig_seccomp this makes the implementation trivial. This is interesting both because it makes force_sigsegv simpler and because there are a couple of buggy places in the kernel that call do_exit(SIGILL) or do_exit(SIGSYS) because there is no straight forward way today for those places to simply force the exit of a process with the chosen signal. Creating force_fatal_sig allows those places to be implemented with normal signal exits. Link: https://lkml.kernel.org/r/20211020174406.17889-13-ebiederm@xmission.com Signed-off-by: Eric W. Biederman Cc: Thomas Backlund Signed-off-by: Greg Kroah-Hartman

printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces

2021-11-25T08:48:45Z

commit 5d5e4522a7f404d1a96fd6c703989d32a9c9568d upstream. printk from NMI context relies on irq work being raised on the local CPU to print to console. This can be a problem if the NMI was raised by a lockup detector to print lockup stack and regs, because the CPU may not enable irqs (because it is locked up). Introduce printk_trigger_flush() that can be called another CPU to try to get those messages to the console, call that where printk_safe_flush was previously called. Fixes: 93d102f094be ("printk: remove safe buffers") Cc: stable@vger.kernel.org # 5.15 Signed-off-by: Nicholas Piggin Reviewed-by: Petr Mladek Reviewed-by: John Ogness Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20211107045116.1754411-1-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman

shm: extend forced shm destroy to support objects from several IPC nses

2021-11-25T08:48:42Z

commit 85b6d24646e4125c591639841169baa98a2da503 upstream. Currently, the exit_shm() function not designed to work properly when task->sysvshm.shm_clist holds shm objects from different IPC namespaces. This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it leads to use-after-free (reproducer exists). This is an attempt to fix the problem by extending exit_shm mechanism to handle shm's destroy from several IPC ns'es. To achieve that we do several things: 1. add a namespace (non-refcounted) pointer to the struct shmid_kernel 2. during new shm object creation (newseg()/shmget syscall) we initialize this pointer by current task IPC ns 3. exit_shm() fully reworked such that it traverses over all shp's in task->sysvshm.shm_clist and gets IPC namespace not from current task as it was before but from shp's object itself, then call shm_destroy(shp, ns). Note: We need to be really careful here, because as it was said before (1), our pointer to IPC ns non-refcnt'ed. To be on the safe side we using special helper get_ipc_ns_not_zero() which allows to get IPC ns refcounter only if IPC ns not in the "state of destruction". Q/A Q: Why can we access shp->ns memory using non-refcounted pointer? A: Because shp object lifetime is always shorther than IPC namespace lifetime, so, if we get shp object from the task->sysvshm.shm_clist while holding task_lock(task) nobody can steal our namespace. Q: Does this patch change semantics of unshare/setns/clone syscalls? A: No. It's just fixes non-covered case when process may leave IPC namespace without getting task->sysvshm.shm_clist list cleaned up. Link: https://lkml.kernel.org/r/67bb03e5-f79c-1815-e2bf-949c67047418@colorfullife.com Link: https://lkml.kernel.org/r/20211109151501.4921-1-manfred@colorfullife.com Fixes: ab602f79915 ("shm: make exit_shm work proportional to task activity") Co-developed-by: Manfred Spraul Signed-off-by: Manfred Spraul Signed-off-by: Alexander Mikhalitsyn Cc: "Eric W. Biederman" Cc: Davidlohr Bueso Cc: Greg KH Cc: Andrei Vagin Cc: Pavel Tikhomirov Cc: Vasily Averin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman