user/sven/linux.git/include, branch v5.15.87

efi: random: combine bootloader provided RNG seed with RNG protocol output

2023-01-12T10:59:20Z

commit 196dff2712ca5a2e651977bb2fe6b05474111a83 upstream. Instead of blindly creating the EFI random seed configuration table if the RNG protocol is implemented and works, check whether such a EFI configuration table was provided by an earlier boot stage and if so, concatenate the existing and the new seeds, leaving it up to the core code to mix it in and credit it the way it sees fit. This can be used for, e.g., systemd-boot, to pass an additional seed to Linux in a way that can be consumed by the kernel very early. In that case, the following definitions should be used to pass the seed to the EFI stub: struct linux_efi_random_seed { u32 size; // of the 'seed' array in bytes u8 seed[]; }; The memory for the struct must be allocated as EFI_ACPI_RECLAIM_MEMORY pool memory, and the address of the struct in memory should be installed as a EFI configuration table using the following GUID: LINUX_EFI_RANDOM_SEED_TABLE_GUID 1ce1e5bc-7ceb-42f2-81e5-8aadf180f57b Note that doing so is safe even on kernels that were built without this patch applied, but the seed will simply be overwritten with a seed derived from the EFI RNG protocol, if available. The recommended seed size is 32 bytes, and seeds larger than 512 bytes are considered corrupted and ignored entirely. In order to preserve forward secrecy, seeds from previous bootloaders are memzero'd out, and in order to preserve memory, those older seeds are also freed from memory. Freeing from memory without first memzeroing is not safe to do, as it's possible that nothing else will ever overwrite those pages used by EFI. Reviewed-by: Jason A. Donenfeld [ardb: incorporate Jason's followup changes to extend the maximum seed size on the consumer end, memzero() it and drop a needless printk] Signed-off-by: Ard Biesheuvel Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

netfilter: ipset: Rework long task execution when adding/deleting entries

2023-01-12T10:59:15Z

[ Upstream commit 5e29dc36bd5e2166b834ceb19990d9e68a734d7d ] When adding/deleting large number of elements in one step in ipset, it can take a reasonable amount of time and can result in soft lockup errors. The patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete") tried to fix it by limiting the max elements to process at all. However it was not enough, it is still possible that we get hung tasks. Lowering the limit is not reasonable, so the approach in this patch is as follows: rely on the method used at resizing sets and save the state when we reach a smaller internal batch limit, unlock/lock and proceed from the saved state. Thus we can avoid long continuous tasks and at the same time removed the limit to add/delete large number of elements in one step. The nfnl mutex is held during the whole operation which prevents one to issue other ipset commands in parallel. Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete") Reported-by: syzbot+9204e7399656300bf271@syzkaller.appspotmail.com Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

filelock: new helper: vfs_inode_has_locks

2023-01-12T10:59:14Z

[ Upstream commit ab1ddef98a715eddb65309ffa83267e4e84a571e ] Ceph has a need to know whether a particular inode has any locks set on it. It's currently tracking that by a num_locks field in its filp->private_data, but that's problematic as it tries to decrement this field when releasing locks and that can race with the file being torn down. Add a new vfs_inode_has_locks helper that just returns whether any locks are currently held on the inode. Reviewed-by: Xiubo Li Reviewed-by: Christoph Hellwig Signed-off-by: Jeff Layton Stable-dep-of: 461ab10ef7e6 ("ceph: switch to vfs_inode_has_locks() to fix file lock bug") Signed-off-by: Sasha Levin

net/mlx5: E-Switch, properly handle ingress tagged packets on VST

2023-01-12T10:59:11Z

[ Upstream commit 1f0ae22ab470946143485a02cc1cd7e05c0f9120 ] Fix SRIOV VST mode behavior to insert cvlan when a guest tag is already present in the frame. Previous VST mode behavior was to drop packets or override existing tag, depending on the device version. In this patch we fix this behavior by correctly building the HW steering rule with a push vlan action, or for older devices we ask the FW to stack the vlan when a vlan is already present. Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Fixes: dfcb1ed3c331 ("net/mlx5: E-Switch, Vport ingress/egress ACLs rules for VST mode") Signed-off-by: Moshe Shemesh Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

netfilter: nf_tables: honor set timeout and garbage collection updates

2023-01-12T10:59:09Z

[ Upstream commit 123b99619cca94bdca0bf7bde9abe28f0a0dfe06 ] Set timeout and garbage collection interval updates are ignored on updates. Add transaction to update global set element timeout and garbage collection interval. Fixes: 96518518cc41 ("netfilter: add nftables") Suggested-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: nf_tables: consolidate set description

2023-01-12T10:59:08Z

[ Upstream commit bed4a63ea4ae77cfe5aae004ef87379f0655260a ] Add the following fields to the set description: - key type - data type - object type - policy - gc_int: garbage collection interval) - timeout: element timeout This prepares for stricter set type checks on updates in a follow up patch. Signed-off-by: Pablo Neira Ayuso Stable-dep-of: f6594c372afd ("netfilter: nf_tables: perform type checking for existing sets") Signed-off-by: Sasha Levin

SUNRPC: ensure the matching upcall is in-flight upon downcall

2023-01-12T10:59:08Z

[ Upstream commit b18cba09e374637a0a3759d856a6bca94c133952 ] Commit 9130b8dbc6ac ("SUNRPC: allow for upcalls for the same uid but different gss service") introduced `auth` argument to __gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL since it (and auth->service) was not (yet) determined. When multiple upcalls with the same uid and different service are ongoing, it could happen that __gss_find_upcall(), which returns the first match found in the pipe->in_downcall list, could not find the correct gss_msg corresponding to the downcall we are looking for. Moreover, it might return a msg which is not sent to rpc.gssd yet. We could see mount.nfs process hung in D state with multiple mount.nfs are executed in parallel. The call trace below is of CentOS 7.9 kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/ elrepo kernel-ml-6.0.7-1.el7. PID: 71258 TASK: ffff91ebd4be0000 CPU: 36 COMMAND: "mount.nfs" #0 [ffff9203ca3234f8] __schedule at ffffffffa3b8899f #1 [ffff9203ca323580] schedule at ffffffffa3b88eb9 #2 [ffff9203ca323590] gss_cred_init at ffffffffc0355818 [auth_rpcgss] #3 [ffff9203ca323658] rpcauth_lookup_credcache at ffffffffc0421ebc [sunrpc] #4 [ffff9203ca3236d8] gss_lookup_cred at ffffffffc0353633 [auth_rpcgss] #5 [ffff9203ca3236e8] rpcauth_lookupcred at ffffffffc0421581 [sunrpc] #6 [ffff9203ca323740] rpcauth_refreshcred at ffffffffc04223d3 [sunrpc] #7 [ffff9203ca3237a0] call_refresh at ffffffffc04103dc [sunrpc] #8 [ffff9203ca3237b8] __rpc_execute at ffffffffc041e1c9 [sunrpc] #9 [ffff9203ca323820] rpc_execute at ffffffffc0420a48 [sunrpc] The scenario is like this. Let's say there are two upcalls for services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe. When rpc.gssd reads pipe to get the upcall msg corresponding to service B from pipe->pipe and then writes the response, in gss_pipe_downcall the msg corresponding to service A will be picked because only uid is used to find the msg and it is before the one for B in pipe->in_downcall. And the process waiting for the msg corresponding to service A will be woken up. Actual scheduing of that process might be after rpc.gssd processes the next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A). The process is scheduled to see gss_msg->ctx == NULL and gss_msg->msg.errno == 0, therefore it cannot break the loop in gss_create_upcall and is never woken up after that. This patch adds a simple check to ensure that a msg which is not sent to rpc.gssd yet is not chosen as the matching upcall upon receiving a downcall. Signed-off-by: minoura makoto Signed-off-by: Hiroshi Shimamoto Tested-by: Hiroshi Shimamoto Cc: Trond Myklebust Fixes: 9130b8dbc6ac ("SUNRPC: allow for upcalls for same uid but different gss service") Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin

ext4: fix deadlock due to mbcache entry corruption

2023-01-12T10:59:07Z

[ Upstream commit a44e84a9b7764c72896f7241a0ec9ac7e7ef38dd ] When manipulating xattr blocks, we can deadlock infinitely looping inside ext4_xattr_block_set() where we constantly keep finding xattr block for reuse in mbcache but we are unable to reuse it because its reference count is too big. This happens because cache entry for the xattr block is marked as reusable (e_reusable set) although its reference count is too big. When this inconsistency happens, this inconsistent state is kept indefinitely and so ext4_xattr_block_set() keeps retrying indefinitely. The inconsistent state is caused by non-atomic update of e_reusable bit. e_reusable is part of a bitfield and e_reusable update can race with update of e_referenced bit in the same bitfield resulting in loss of one of the updates. Fix the problem by using atomic bitops instead. This bug has been around for many years, but it became *much* easier to hit after commit 65f8b80053a1 ("ext4: fix race when reusing xattr blocks"). Cc: stable@vger.kernel.org Fixes: 6048c64b2609 ("mbcache: add reusable flag to cache entries") Fixes: 65f8b80053a1 ("ext4: fix race when reusing xattr blocks") Reported-and-tested-by: Jeremi Piotrowski Reported-by: Thilo Fromm Link: https://lore.kernel.org/r/c77bf00f-4618-7149-56f1-b8d1664b9d07@linux.microsoft.com/ Signed-off-by: Jan Kara Reviewed-by: Andreas Dilger Link: https://lore.kernel.org/r/20221123193950.16758-1-jack@suse.cz Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin

mbcache: automatically delete entries from cache on freeing

2023-01-12T10:59:07Z

[ Upstream commit 307af6c879377c1c63e71cbdd978201f9c7ee8df ] Use the fact that entries with elevated refcount are not removed from the hash and just move removal of the entry from the hash to the entry freeing time. When doing this we also change the generic code to hold one reference to the cache entry, not two of them, which makes code somewhat more obvious. Signed-off-by: Jan Kara Link: https://lore.kernel.org/r/20220712105436.32204-10-jack@suse.cz Signed-off-by: Theodore Ts'o Stable-dep-of: a44e84a9b776 ("ext4: fix deadlock due to mbcache entry corruption") Signed-off-by: Sasha Levin

ext4: disable fast-commit of encrypted dir operations

2023-01-12T10:59:04Z

From: Eric Biggers commit 0fbcb5251fc81b58969b272c4fb7374a7b922e3e upstream. fast-commit of create, link, and unlink operations in encrypted directories is completely broken because the unencrypted filenames are being written to the fast-commit journal instead of the encrypted filenames. These operations can't be replayed, as encryption keys aren't present at journal replay time. It is also an information leak. Until if/when we can get this working properly, make encrypted directory operations ineligible for fast-commit. Note that fast-commit operations on encrypted regular files continue to be allowed, as they seem to work. Fixes: aa75f4d3daae ("ext4: main fast-commit commit path") Cc: # v5.10+ Signed-off-by: Eric Biggers Link: https://lore.kernel.org/r/20221106224841.279231-2-ebiggers@kernel.org Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman