user/sven/linux.git/include, branch v5.16.16

netfilter: egress: silence egress hook lockdep splats

2022-03-19T12:48:44Z

[ Upstream commit 17a8f31bba7bac8cce4bd12bab50697da96e7710 ] Netfilter assumes its called with rcu_read_lock held, but in egress hook case it may be called with BH readlock. This triggers lockdep splat. In order to avoid to change all rcu_dereference() to rcu_dereference_check(..., rcu_read_lock_bh_held()), wrap nf_hook_slow with read lock/unlock pair. Reported-by: Eric Dumazet Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

xfrm: Check if_id in xfrm_migrate

2022-03-19T12:48:41Z

[ Upstream commit c1aca3080e382886e2e58e809787441984a2f89b ] This patch enables distinguishing SAs and SPs based on if_id during the xfrm_migrate flow. This ensures support for xfrm interfaces throughout the SA/SP lifecycle. When there are multiple existing SPs with the same direction, the same xfrm_selector and different endpoint addresses, xfrm_migrate might fail with ENODATA. Specifically, the code path for performing xfrm_migrate is: Stage 1: find policy to migrate with xfrm_migrate_policy_find(sel, dir, type, net) Stage 2: find and update state(s) with xfrm_migrate_state_find(mp, net) Stage 3: update endpoint address(es) of template(s) with xfrm_policy_migrate(pol, m, num_migrate) Currently "Stage 1" always returns the first xfrm_policy that matches, and "Stage 3" looks for the xfrm_tmpl that matches the old endpoint address. Thus if there are multiple xfrm_policy with same selector, direction, type and net, "Stage 1" might rertun a wrong xfrm_policy and "Stage 3" will fail with ENODATA because it cannot find a xfrm_tmpl with the matching endpoint address. The fix is to allow userspace to pass an if_id and add if_id to the matching rule in Stage 1 and Stage 2 since if_id is a unique ID for xfrm_policy and xfrm_state. For compatibility, if_id will only be checked if the attribute is set. Tested with additions to Android's kernel unit test suite: https://android-review.googlesource.com/c/kernel/tests/+/1668886 Signed-off-by: Yan Yan Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin

watch_queue: Fix filter limit check

2022-03-16T13:26:50Z

commit c993ee0f9f81caf5767a50d1faeba39a0dc82af2 upstream. In watch_queue_set_filter(), there are a couple of places where we check that the filter type value does not exceed what the type_filter bitmap can hold. One place calculates the number of bits by: if (tf[i].type >= sizeof(wfilter->type_filter) * 8) which is fine, but the second does: if (tf[i].type >= sizeof(wfilter->type_filter) * BITS_PER_LONG) which is not. This can lead to a couple of out-of-bounds writes due to a too-large type: (1) __set_bit() on wfilter->type_filter (2) Writing more elements in wfilter->filters[] than we allocated. Fix this by just using the proper WATCH_TYPE__NR instead, which is the number of types we actually know about. The bug may cause an oops looking something like: BUG: KASAN: slab-out-of-bounds in watch_queue_set_filter+0x659/0x740 Write of size 4 at addr ffff88800d2c66bc by task watch_queue_oob/611 ... Call Trace: dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 ... kasan_report.cold+0x7f/0x11b ... watch_queue_set_filter+0x659/0x740 ... __x64_sys_ioctl+0x127/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Allocated by task 611: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 watch_queue_set_filter+0x23a/0x740 __x64_sys_ioctl+0x127/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88800d2c66a0 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 28 bytes inside of 32-byte region [ffff88800d2c66a0, ffff88800d2c66c0) Fixes: c73be61cede5 ("pipe: Add general notification queue support") Reported-by: Jann Horn Signed-off-by: David Howells Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

virtio: acknowledge all features before access

2022-03-16T13:26:50Z

commit 4fa59ede95195f267101a1b8916992cf3f245cdb upstream. The feature negotiation was designed in a way that makes it possible for devices to know which config fields will be accessed by drivers. This is broken since commit 404123c2db79 ("virtio: allow drivers to validate features") with fallout in at least block and net. We have a partial work-around in commit 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") which at least lets devices find out which format should config space have, but this is a partial fix: guests should not access config space without acknowledging features since otherwise we'll never be able to change the config space format. To fix, split finalize_features from virtio_finalize_features and call finalize_features with all feature bits before validation, and then - if validation changed any bits - once again after. Since virtio_finalize_features no longer writes out features rename it to virtio_features_ok - since that is what it does: checks that features are ok with the device. As a side effect, this also reduces the amount of hypervisor accesses - we now only acknowledge features once unless we are clearing any features when validating (which is uncommon). IRC I think that this was more or less always the intent in the spec but unfortunately the way the spec is worded does not say this explicitly, I plan to address this at the spec level, too. Acked-by: Jason Wang Cc: stable@vger.kernel.org Fixes: 404123c2db79 ("virtio: allow drivers to validate features") Fixes: 2f9a174f918e ("virtio: write back F_VERSION_1 before validate") Cc: "Halil Pasic" Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

virtio: unexport virtio_finalize_features

2022-03-16T13:26:50Z

commit 838d6d3461db0fdbf33fc5f8a69c27b50b4a46da upstream. virtio_finalize_features is only used internally within virtio. No reason to export it. Signed-off-by: Michael S. Tsirkin Reviewed-by: Cornelia Huck Acked-by: Jason Wang Signed-off-by: Greg Kroah-Hartman

swiotlb: rework "fix info leak with DMA_FROM_DEVICE"

2022-03-16T13:26:50Z

commit aa6f8dcbab473f3a3c7454b74caa46d36cdc5d13 upstream. Unfortunately, we ended up merging an old version of the patch "fix info leak with DMA_FROM_DEVICE" instead of merging the latest one. Christoph (the swiotlb maintainer), he asked me to create an incremental fix (after I have pointed this out the mix up, and asked him for guidance). So here we go. The main differences between what we got and what was agreed are: * swiotlb_sync_single_for_device is also required to do an extra bounce * We decided not to introduce DMA_ATTR_OVERWRITE until we have exploiters * The implantation of DMA_ATTR_OVERWRITE is flawed: DMA_ATTR_OVERWRITE must take precedence over DMA_ATTR_SKIP_CPU_SYNC Thus this patch removes DMA_ATTR_OVERWRITE, and makes swiotlb_sync_single_for_device() bounce unconditionally (that is, also when dir == DMA_TO_DEVICE) in order do avoid synchronising back stale data from the swiotlb buffer. Let me note, that if the size used with dma_sync_* API is less than the size used with dma_[un]map_*, under certain circumstances we may still end up with swiotlb not being transparent. In that sense, this is no perfect fix either. To get this bullet proof, we would have to bounce the entire mapping/bounce buffer. For that we would have to figure out the starting address, and the size of the mapping in swiotlb_sync_single_for_device(). While this does seem possible, there seems to be no firm consensus on how things are supposed to work. Signed-off-by: Halil Pasic Fixes: ddbd89deb7d3 ("swiotlb: fix info leak with DMA_FROM_DEVICE") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

nvme-tcp: send H2CData PDUs based on MAXH2CDATA

2022-03-16T13:26:47Z

[ Upstream commit c2700d2886a87f83f31e0a301de1d2350b52c79b ] As per NVMe/TCP specification (revision 1.0a, section 3.6.2.3) Maximum Host to Controller Data length (MAXH2CDATA): Specifies the maximum number of PDU-Data bytes per H2CData PDU in bytes. This value is a multiple of dwords and should be no less than 4,096. Current code sets H2CData PDU data_length to r2t_length, it does not check MAXH2CDATA value. Fix this by setting H2CData PDU data_length to min(req->h2cdata_left, queue->maxh2cdata). Also validate MAXH2CDATA value returned by target in ICResp PDU, if it is not a multiple of dword or if it is less than 4096 return -EINVAL from nvme_tcp_init_connection(). Signed-off-by: Varun Prakash Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

swiotlb: fix info leak with DMA_FROM_DEVICE

2022-03-16T13:26:46Z

[ Upstream commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e ] The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. Signed-off-by: Halil Pasic Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

net/mlx5e: SHAMPO, reduce TIR indication

2022-03-16T13:26:45Z

[ Upstream commit 99a2b9be077ae3a5d97fbf5f7782e0f2e9812978 ] SHAMPO is an RQ / WQ feature, an indication was added to the TIR in the first place to enforce suitability between connected TIR and RQ, this enforcement does not exist in current the Firmware implementation and was redundant in the first place. Fixes: 83439f3c37aa ("net/mlx5e: Add HW-GRO offload") Signed-off-by: Ben Ben-Ishay Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

net/mlx5: Fix size field in bufferx_reg struct

2022-03-16T13:26:44Z

[ Upstream commit ac77998b7ac3044f0509b097da9637184598980d ] According to HW spec the field "size" should be 16 bits in bufferx register. Fixes: e281682bf294 ("net/mlx5_core: HW data structs/types definitions cleanup") Signed-off-by: Mohammad Kabat Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin