user/sven/linux.git/include, branch v5.17.8

rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition

2022-05-15T18:20:51Z

commit a36e07dfe6ee71e209383ea9288cd8d1617e14f9 upstream. The definition of RFKILL_IOCTL_MAX_SIZE introduced by commit 54f586a91532 ("rfkill: make new event layout opt-in") is unusable since it is based on RFKILL_IOC_EXT_SIZE which has not been defined. Fix that by replacing the undefined constant with the constant which is intended to be used in this definition. Fixes: 54f586a91532 ("rfkill: make new event layout opt-in") Cc: stable@vger.kernel.org # 5.11+ Signed-off-by: Gleb Fotengauer-Malinovskiy Signed-off-by: Dmitry V. Levin Link: https://lore.kernel.org/r/20220506172454.120319-1-glebfm@altlinux.org [add commit message provided later by Dmitry] Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix the creation of hdev->name

2022-05-15T18:20:51Z

commit 103a2f3255a95991252f8f13375c3a96a75011cd upstream. Set a size limit of 8 bytes of the written buffer to "hdev->name" including the terminating null byte, as the size of "hdev->name" is 8 bytes. If an id value which is greater than 9999 is allocated, then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)" function call would lead to a truncation of the id value in decimal notation. Set an explicit maximum id parameter in the id allocation function call. The id allocation function defines the maximum allocated id value as the maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined as 10000. Signed-off-by: Itay Iellin Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

net: stmmac: disable Split Header (SPH) for Intel platforms

2022-05-12T10:32:20Z

commit 47f753c1108e287edb3e27fad8a7511a9d55578e upstream. Based on DesignWare Ethernet QoS datasheet, we are seeing the limitation of Split Header (SPH) feature is not supported for Ipv4 fragmented packet. This SPH limitation will cause ping failure when the packets size exceed the MTU size. For example, the issue happens once the basic ping packet size is larger than the configured MTU size and the data is lost inside the fragmented packet, replaced by zeros/corrupted values, and leads to ping fail. So, disable the Split Header for Intel platforms. v2: Add fixes tag in commit message. Fixes: 67afd6d1cfdf("net: stmmac: Add Split Header support and enable it in XGMAC cores") Cc: # 5.10.x Suggested-by: Ong, Boon Leong Signed-off-by: Mohammad Athari Bin Ismail Signed-off-by: Wong Vee Khee Signed-off-by: Tan Tee Min Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_event: Fix checking for invalid handle on error status

2022-05-09T07:16:24Z

[ Upstream commit c86cc5a3ec70f5644f1fa21610b943d0441bc1f7 ] Commit d5ebaa7c5f6f6 introduces checks for handle range (e.g HCI_CONN_HANDLE_MAX) but controllers like Intel AX200 don't seem to respect the valid range int case of error status: > HCI Event: Connect Complete (0x03) plen 11 Status: Page Timeout (0x04) Handle: 65535 Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc) Link type: ACL (0x01) Encryption: Disabled (0x00) [1644965.827560] Bluetooth: hci0: Ignoring HCI_Connection_Complete for invalid handle Because of it is impossible to cleanup the connections properly since the stack would attempt to cancel the connection which is no longer in progress causing the following trace: < HCI Command: Create Connection Cancel (0x01|0x0008) plen 6 Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc) = bluetoothd: src/profile.c:record_cb() Unable to get Hands-Free Voice gateway SDP record: Connection timed out > HCI Event: Command Complete (0x0e) plen 10 Create Connection Cancel (0x01|0x0008) ncmd 1 Status: Unknown Connection Identifier (0x02) Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc) < HCI Command: Create Connection Cancel (0x01|0x0008) plen 6 Address: 94:DB:56:XX:XX:XX (Sony Home Entertainment& Sound Products Inc) Fixes: d5ebaa7c5f6f6 ("Bluetooth: hci_event: Ignore multiple conn complete events") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin

tcp: make sure treq->af_specific is initialized

2022-05-09T07:16:23Z

[ Upstream commit ba5a4fdd63ae0c575707030db0b634b160baddd7 ] syzbot complained about a recent change in TCP stack, hitting a NULL pointer [1] tcp request sockets have an af_specific pointer, which was used before the blamed change only for SYNACK generation in non SYNCOOKIE mode. tcp requests sockets momentarily created when third packet coming from client in SYNCOOKIE mode were not using treq->af_specific. Make sure this field is populated, in the same way normal TCP requests sockets do in tcp_conn_request(). [1] TCP: request_sock_TCPv6: Possible SYN flooding on port 20002. Sending cookies. Check SNMP counters. general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 3695 Comm: syz-executor864 Not tainted 5.18.0-rc3-syzkaller-00224-g5fd1fe4807f9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:tcp_create_openreq_child+0xe16/0x16b0 net/ipv4/tcp_minisocks.c:534 Code: 48 c1 ea 03 80 3c 02 00 0f 85 e5 07 00 00 4c 8b b3 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7e 08 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c9 07 00 00 48 8b 3c 24 48 89 de 41 ff 56 08 48 RSP: 0018:ffffc90000de0588 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888076490330 RCX: 0000000000000100 RDX: 0000000000000001 RSI: ffffffff87d67ff0 RDI: 0000000000000008 RBP: ffff88806ee1c7f8 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff87d67f00 R11: 0000000000000000 R12: ffff88806ee1bfc0 R13: ffff88801b0e0368 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f517fe58700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffcead76960 CR3: 000000006f97b000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tcp_v6_syn_recv_sock+0x199/0x23b0 net/ipv6/tcp_ipv6.c:1267 tcp_get_cookie_sock+0xc9/0x850 net/ipv4/syncookies.c:207 cookie_v6_check+0x15c3/0x2340 net/ipv6/syncookies.c:258 tcp_v6_cookie_check net/ipv6/tcp_ipv6.c:1131 [inline] tcp_v6_do_rcv+0x1148/0x13b0 net/ipv6/tcp_ipv6.c:1486 tcp_v6_rcv+0x3305/0x3840 net/ipv6/tcp_ipv6.c:1725 ip6_protocol_deliver_rcu+0x2e9/0x1900 net/ipv6/ip6_input.c:422 ip6_input_finish+0x14c/0x2c0 net/ipv6/ip6_input.c:464 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:473 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x27f/0x3b0 net/ipv6/ip6_input.c:297 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5405 __netif_receive_skb+0x24/0x1b0 net/core/dev.c:5519 process_backlog+0x3a0/0x7c0 net/core/dev.c:5847 __napi_poll+0xb3/0x6e0 net/core/dev.c:6413 napi_poll net/core/dev.c:6480 [inline] net_rx_action+0x8ec/0xc60 net/core/dev.c:6567 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:637 irq_exit_rcu+0x5/0x20 kernel/softirq.c:649 sysvec_apic_timer_interrupt+0x93/0xc0 arch/x86/kernel/apic/apic.c:1097 Fixes: 5b0b9e4c2c89 ("tcp: md5: incorrect tcp_header_len for incoming connections") Signed-off-by: Eric Dumazet Cc: Francesco Ruggeri Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT

2022-05-09T07:16:23Z

[ Upstream commit 4bfe744ff1644fbc0a991a2677dc874475dd6776 ] I had this bug sitting for too long in my pile, it is time to fix it. Thanks to Doug Porter for reminding me of it! We had various attempts in the past, including commit 0cbe6a8f089e ("tcp: remove SOCK_QUEUE_SHRUNK"), but the issue is that TCP stack currently only generates EPOLLOUT from input path, when tp->snd_una has advanced and skb(s) cleaned from rtx queue. If a flow has a big RTT, and/or receives SACKs, it is possible that the notsent part (tp->write_seq - tp->snd_nxt) reaches 0 and no more data can be sent until tp->snd_una finally advances. What is needed is to also check if POLLOUT needs to be generated whenever tp->snd_nxt is advanced, from output path. This bug triggers more often after an idle period, as we do not receive ACK for at least one RTT. tcp_notsent_lowat could be a fraction of what CWND and pacing rate would allow to send during this RTT. In a followup patch, I will remove the bogus call to tcp_chrono_stop(sk, TCP_CHRONO_SNDBUF_LIMITED) from tcp_check_space(). Fact that we have decided to generate an EPOLLOUT does not mean the application has immediately refilled the transmit queue. This optimistic call might have been the reason the bug seemed not too serious. Tested: 200 ms rtt, 1% packet loss, 32 MB tcp_rmem[2] and tcp_wmem[2] $ echo 500000 >/proc/sys/net/ipv4/tcp_notsent_lowat $ cat bench_rr.sh SUM=0 for i in {1..10} do V=`netperf -H remote_host -l30 -t TCP_RR -- -r 10000000,10000 -o LOCAL_BYTES_SENT | egrep -v "MIGRATED|Bytes"` echo $V SUM=$(($SUM + $V)) done echo SUM=$SUM Before patch: $ bench_rr.sh 130000000 80000000 140000000 140000000 140000000 140000000 130000000 40000000 90000000 110000000 SUM=1140000000 After patch: $ bench_rr.sh 430000000 590000000 530000000 450000000 450000000 350000000 450000000 490000000 480000000 460000000 SUM=4680000000 # This is 410 % of the value before patch. Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by: Eric Dumazet Reported-by: Doug Porter Cc: Soheil Hassas Yeganeh Cc: Neal Cardwell Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode

2022-05-09T07:16:23Z

[ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ] As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events: 1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's: gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^ Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t. As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on. Maybe a better fix would be: 1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq". Unfortunately, that would break userspace. We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal. Suggested-by: Jakub Kicinski Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye Acked-by: William Tu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

tcp: ensure to use the most recently sent skb when filling the rate sample

2022-05-09T07:16:21Z

[ Upstream commit b253a0680ceadc5d7b4acca7aa2d870326cad8ad ] If an ACK (s)acks multiple skbs, we favor the information from the most recently sent skb by choosing the skb with the highest prior_delivered count. But in the interval between receiving ACKs, we send multiple skbs with the same prior_delivered, because the tp->delivered only changes when we receive an ACK. We used RACK's solution, copying tcp_rack_sent_after() as tcp_skb_sent_after() helper to determine "which packet was sent last?". Later, we will use tcp_skb_sent_after() instead in RACK. Fixes: b9f64820fb22 ("tcp: track data delivery rate for a TCP connection") Signed-off-by: Pengcheng Yang Cc: Paolo Abeni Acked-by: Neal Cardwell Tested-by: Neal Cardwell Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/1650422081-22153-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual Mode

2022-05-09T07:16:21Z

[ Upstream commit 7e842d70fe599bc13594b650b2144c4b6e6d6bf1 ] HyperFlash devices fail to probe: rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits (SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived from half of the transfer size, cfr. the rpcif_bits_set() helper function. However, rpcif_reg_{read,write}() does not take the bus size into account, and does not double all Manual Mode Data Register access sizes when communicating with a HyperFlash or Octal-SPI Flash device. Fix this, and avoid the back-and-forth conversion between transfer size and Transfer Data Enable bits, by explicitly storing the transfer size in struct rpcif, and using that value to determine access size in rpcif_reg_{read,write}(). Enforce that the "high" Manual Mode Read/Write Data Registers (SM[RW]DR1) are only used for 8-byte data accesses. While at it, forbid writing to the Manual Mode Read Data Registers, as they are read-only. Fixes: fff53a551db50f5e ("memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode") Signed-off-by: Geert Uytterhoeven Signed-off-by: Krzysztof Kozlowski Tested-by: Lad Prabhakar Tested-by: Wolfram Sang Reviewed-by: Wolfram Sang Link: https://lore.kernel.org/r/cde9bfacf704c81865f57b15d1b48a4793da4286.1649681476.git.geert+renesas@glider.be Link: https://lore.kernel.org/r/20220420070526.9367-1-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin

mtd: fix 'part' field data corruption in mtd_info

2022-05-09T07:16:21Z

[ Upstream commit 37c5f9e80e015d0df17d0c377c18523002986851 ] Commit 46b5889cc2c5 ("mtd: implement proper partition handling") started using "mtd_get_master_ofs()" in mtd callbacks to determine memory offsets by means of 'part' field from mtd_info, what previously was smashed accessing 'master' field in the mtd_set_dev_defaults() method. That provides wrong offset what causes hardware access errors. Just make 'part', 'master' as separate fields, rather than using union type to avoid 'part' data corruption when mtd_set_dev_defaults() is called. Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling") Signed-off-by: Oleksandr Ocheretnyi Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20220417184649.449289-1-oocheret@cisco.com Signed-off-by: Sasha Levin