user/sven/linux.git/include, branch v5.4.101

mm: provide a saner PTE walking API for modules

2021-02-26T09:10:28Z

commit 9fd6dad1261a541b3f5fa7dc5b152222306e6702 upstream. Currently, the follow_pfn function is exported for modules but follow_pte is not. However, follow_pfn is very easy to misuse, because it does not provide protections (so most of its callers assume the page is writable!) and because it returns after having already unlocked the page table lock. Provide instead a simplified version of follow_pte that does not have the pmdpp and range arguments. The older version survives as follow_invalidate_pte() for use by fs/dax.c. Reviewed-by: Jason Gunthorpe Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

mm: simplify follow_pte{,pmd}

2021-02-26T09:10:27Z

commit ff5c19ed4b087073cea38ff0edc80c23d7256943 upstream. Merge __follow_pte_pmd, follow_pte_pmd and follow_pte into a single follow_pte function and just pass two additional NULL arguments for the two previous follow_pte callers. [sfr@canb.auug.org.au: merge fix for "s390/pci: remove races against pte updates"] Link: https://lkml.kernel.org/r/20201111221254.7f6a3658@canb.auug.org.au Link: https://lkml.kernel.org/r/20201029101432.47011-3-hch@lst.de Signed-off-by: Christoph Hellwig Reviewed-by: Matthew Wilcox (Oracle) Cc: Daniel Vetter Cc: Dan Williams Cc: Nick Desaulniers Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

Xen/gntdev: correct error checking in gntdev_map_grant_pages()

2021-02-23T14:02:26Z

commit ebee0eab08594b2bd5db716288a4f1ae5936e9bc upstream. Failure of the kernel part of the mapping operation should also be indicated as an error to the caller, or else it may assume the respective kernel VA is okay to access. Furthermore gnttab_map_refs() failing still requires recording successfully mapped handles, so they can be unmapped subsequently. This in turn requires there to be a way to tell full hypercall failure from partial success - preset map_op status fields such that they won't "happen" to look as if the operation succeeded. Also again use GNTST_okay instead of implying its value (zero). This is part of XSA-361. Signed-off-by: Jan Beulich Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

net: watchdog: hold device global xmit lock during tx disable

2021-02-17T09:35:19Z

commit 3aa6bce9af0e25b735c9c1263739a5639a336ae8 upstream. Prevent netif_tx_disable() running concurrently with dev_watchdog() by taking the device global xmit lock. Otherwise, the recommended: netif_carrier_off(dev); netif_tx_disable(dev); driver shutdown sequence can happen after the watchdog has already checked carrier, resulting in possible false alarms. This is because netif_tx_lock() only sets the frozen bit without maintaining the locks on the individual queues. Fixes: c3f26a269c24 ("netdev: Fix lockdep warnings in multiqueue configurations.") Signed-off-by: Edwin Peer Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

udp: fix skb_copy_and_csum_datagram with odd segment sizes

2021-02-17T09:35:19Z

commit 52cbd23a119c6ebf40a527e53f3402d2ea38eccb upstream. When iteratively computing a checksum with csum_block_add, track the offset "pos" to correctly rotate in csum_block_add when offset is odd. The open coded implementation of skb_copy_and_csum_datagram did this. With the switch to __skb_datagram_iter calling csum_and_copy_to_iter, pos was reinitialized to 0 on each call. Bring back the pos by passing it along with the csum to the callback. Changes v1->v2 - pass csum value, instead of csump pointer (Alexander Duyck) Link: https://lore.kernel.org/netdev/20210128152353.GB27281@optiplex/ Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers") Reported-by: Oliver Graute Signed-off-by: Willem de Bruijn Reviewed-by: Alexander Duyck Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20210203192952.1849843-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

firmware_loader: align .builtin_fw to 8

2021-02-17T09:35:18Z

[ Upstream commit 793f49a87aae24e5bcf92ad98d764153fc936570 ] arm64 references the start address of .builtin_fw (__start_builtin_fw) with a pair of R_AARCH64_ADR_PREL_PG_HI21/R_AARCH64_LDST64_ABS_LO12_NC relocations. The compiler is allowed to emit the R_AARCH64_LDST64_ABS_LO12_NC relocation because struct builtin_fw in include/linux/firmware.h is 8-byte aligned. The R_AARCH64_LDST64_ABS_LO12_NC relocation requires the address to be a multiple of 8, which may not be the case if .builtin_fw is empty. Unconditionally align .builtin_fw to fix the linker error. 32-bit architectures could use ALIGN(4) but that would add unnecessary complexity, so just use ALIGN(8). Link: https://lkml.kernel.org/r/20201208054646.2913063-1-maskray@google.com Link: https://github.com/ClangBuiltLinux/linux/issues/1204 Fixes: 5658c76 ("firmware: allow firmware files to be built into kernel image") Signed-off-by: Fangrui Song Reported-by: kernel test robot Acked-by: Arnd Bergmann Reviewed-by: Nick Desaulniers Tested-by: Nick Desaulniers Tested-by: Douglas Anderson Acked-by: Nathan Chancellor Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

vmlinux.lds.h: Create section for protection against instrumentation

2021-02-17T09:35:16Z

[ Upstream commit 6553896666433e7efec589838b400a2a652b3ffa ] Some code pathes, especially the low level entry code, must be protected against instrumentation for various reasons: - Low level entry code can be a fragile beast, especially on x86. - With NO_HZ_FULL RCU state needs to be established before using it. Having a dedicated section for such code allows to validate with tooling that no unsafe functions are invoked. Add the .noinstr.text section and the noinstr attribute to mark functions. noinstr implies notrace. Kprobes will gain a section check later. Provide also a set of markers: instrumentation_begin()/end() These are used to mark code inside a noinstr function which calls into regular instrumentable text section as safe. The instrumentation markers are only active when CONFIG_DEBUG_ENTRY is enabled as the end marker emits a NOP to prevent the compiler from merging the annotation points. This means the objtool verification requires a kernel compiled with this option. Signed-off-by: Thomas Gleixner Reviewed-by: Alexandre Chartre Acked-by: Peter Zijlstra Link: https://lkml.kernel.org/r/20200505134100.075416272@linutronix.de Signed-off-by: Sasha Levin

arm/xen: Don't probe xenbus as part of an early initcall

2021-02-17T09:35:14Z

commit c4295ab0b485b8bc50d2264bcae2acd06f25caaf upstream. After Commit 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI"), xenbus_probe() will be called too early on Arm. This will recent to a guest hang during boot. If the hang wasn't there, we would have ended up to call xenbus_probe() twice (the second time is in xenbus_probe_initcall()). We don't need to initialize xenbus_probe() early for Arm guest. Therefore, the call in xen_guest_init() is now removed. After this change, there is no more external caller for xenbus_probe(). So the function is turned to a static one. Interestingly there were two prototypes for it. Cc: stable@vger.kernel.org Fixes: 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI") Reported-by: Ian Jackson Signed-off-by: Julien Grall Reviewed-by: David Woodhouse Reviewed-by: Stefano Stabellini Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

SUNRPC: Move simple_get_bytes and simple_get_netobj into private header

2021-02-13T12:52:56Z

[ Upstream commit ba6dfce47c4d002d96cd02a304132fca76981172 ] Remove duplicated helper functions to parse opaque XDR objects and place inside new file net/sunrpc/auth_gss/auth_gss_internal.h. In the new file carry the license and copyright from the source file net/sunrpc/auth_gss/auth_gss.c. Finally, update the comment inside include/linux/sunrpc/xdr.h since lockd is not the only user of struct xdr_netobj. Signed-off-by: Dave Wysochanski Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin

tracing/kprobe: Fix to support kretprobe events on unloaded modules

2021-02-13T12:52:54Z

commit 97c753e62e6c31a404183898d950d8c08d752dbd upstream. Fix kprobe_on_func_entry() returns error code instead of false so that register_kretprobe() can return an appropriate error code. append_trace_kprobe() expects the kprobe registration returns -ENOENT when the target symbol is not found, and it checks whether the target module is unloaded or not. If the target module doesn't exist, it defers to probe the target symbol until the module is loaded. However, since register_kretprobe() returns -EINVAL instead of -ENOENT in that case, it always fail on putting the kretprobe event on unloaded modules. e.g. Kprobe event: /sys/kernel/debug/tracing # echo p xfs:xfs_end_io >> kprobe_events [ 16.515574] trace_kprobe: This probe might be able to register after target module is loaded. Continue. Kretprobe event: (p -> r) /sys/kernel/debug/tracing # echo r xfs:xfs_end_io >> kprobe_events sh: write error: Invalid argument /sys/kernel/debug/tracing # cat error_log [ 41.122514] trace_kprobe: error: Failed to register probe event Command: r xfs:xfs_end_io ^ To fix this bug, change kprobe_on_func_entry() to detect symbol lookup failure and return -ENOENT in that case. Otherwise it returns -EINVAL or 0 (succeeded, given address is on the entry). Link: https://lkml.kernel.org/r/161176187132.1067016.8118042342894378981.stgit@devnote2 Cc: stable@vger.kernel.org Fixes: 59158ec4aef7 ("tracing/kprobes: Check the probe on unloaded module correctly") Reported-by: Jianlin Lv Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman