user/sven/linux.git/include, branch v5.5.5

gpio: add gpiod_toggle_active_low()

2020-02-19T18:54:13Z

[ Upstream commit d3a5bcb4a17f1ad072484bb92c42519ff3aba6e1 ] Add possibility to toggle active-low flag of a gpio descriptor. This is useful for compatibility code, where defaults are inverted vs DT gpio flags or the active-low flag is taken from elsewhere. Acked-by: Linus Walleij Signed-off-by: Michał Mirosław Link: https://lore.kernel.org/r/7ce0338e01ad17fa5a227176813941b41a7c35c1.1576031637.git.mirq-linux@rere.qmqm.pl Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mac80211: use more bits for ack_frame_id

2020-02-19T18:54:10Z

commit f2b18baca9539c6a3116d48b70972c7a2ba5d766 upstream. It turns out that this wasn't a good idea, I hit a test failure in hwsim due to this. That particular failure was easily worked around, but it raised questions: if an AP needs to, for example, send action frames to each connected station, the current limit is nowhere near enough (especially if those stations are sleeping and the frames are queued for a while.) Shuffle around some bits to make more room for ack_frame_id to allow up to 8192 queued up frames, that's enough for queueing 4 frames to each connected station, even at the maximum of 2007 stations on a single AP. We take the bits from band (which currently only 2 but I leave 3 in case we add another band) and from the hw_queue, which can only need 4 since it has a limit of 16 queues. Fixes: 6912daed05e1 ("mac80211: Shrink the size of ack_frame_id to make room for tx_time_est") Signed-off-by: Johannes Berg Acked-by: Toke Høiland-Jørgensen Link: https://lore.kernel.org/r/20200115122549.b9a4ef9f4980.Ied52ed90150220b83a280009c590b65d125d087c@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

ACPICA: Introduce acpi_any_gpe_status_set()

2020-02-19T18:54:02Z

commit ea128834dd76f9a72a35d011c651fa96658f06a7 upstream. Introduce a new helper function, acpi_any_gpe_status_set(), for checking the status bits of all enabled GPEs in one go. It is needed to distinguish spurious SCIs from genuine ones when deciding whether or not to wake up the system from suspend-to-idle. Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: PM: s2idle: Avoid possible race related to the EC GPE

2020-02-19T18:54:01Z

commit e3728b50cd9be7d4b1469447cdf1feb93e3b7adb upstream. It is theoretically possible for the ACPI EC GPE to be set after the s2idle_ops->wake() called from s2idle_loop() has returned and before the subsequent pm_wakeup_pending() check is carried out. If that happens, the resulting wakeup event will cause the system to resume even though it may be a spurious one. To avoid that race, first make the ->wake() callback in struct platform_s2idle_ops return a bool value indicating whether or not to let the system resume and rearrange s2idle_loop() to use that value instad of the direct pm_wakeup_pending() call if ->wake() is present. Next, rework acpi_s2idle_wake() to process EC events and check pm_wakeup_pending() before re-arming the SCI for system wakeup to prevent it from triggering prematurely and add comments to that function to explain the rationale for the new code flow. Fixes: 56b991849009 ("PM: sleep: Simplify suspend-to-idle control flow") Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

RDMA/uverbs: Verify MR access flags

2020-02-14T21:52:56Z

commit ca95c1411198c2d87217c19d44571052cdc94725 upstream. Verify that MR access flags that are passed from user are all supported ones, otherwise an error is returned. Fixes: 4fca03778351 ("IB/uverbs: Move ib_access_flags and ib_read_counters_flags to uapi") Link: https://lore.kernel.org/r/1578506740-22188-6-git-send-email-yishaih@mellanox.com Signed-off-by: Michael Guralnik Signed-off-by: Yishai Hadas Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

IB/mlx5: Return the administrative GUID if exists

2020-02-14T21:52:56Z

commit 4bbd4923d1f5627b0c47a9d7dfb5cc91224cfe0c upstream. A user can change the operational GUID (a.k.a affective GUID) through link/infiniband. Therefore it is preferred to return the currently set GUID if it exists instead of the operational. This way the PF can query which VF GUID will be set in the next bind. In order to align with MAC address, zero is returned if administrative GUID is not set. For example, before setting administrative GUID: $ ip link show ib0: mtu 4092 qdisc mq state UP mode DEFAULT group default qlen 256 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, NODE_GUID 00:00:00:00:00:00:00:00, PORT_GUID 00:00:00:00:00:00:00:00, link-state auto, trust off, query_rss off Then: $ ip link set ib0 vf 0 node_guid 11:00:af:21:cb:05:11:00 $ ip link set ib0 vf 0 port_guid 22:11:af:21:cb:05:11:00 After setting administrative GUID: $ ip link show ib0: mtu 4092 qdisc mq state UP mode DEFAULT group default qlen 256 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff vf 0 link/infiniband 00:00:00:08:fe:80:00:00:00:00:00:00:52:54:00:c0:fe:12:34:55 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff, spoof checking off, NODE_GUID 11:00:af:21:cb:05:11:00, PORT_GUID 22:11:af:21:cb:05:11:00, link-state auto, trust off, query_rss off Fixes: 9c0015ef0928 ("IB/mlx5: Implement callbacks for getting VFs GUID attributes") Link: https://lore.kernel.org/r/20200116120048.12744-1-leon@kernel.org Signed-off-by: Danit Goldberg Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

regulator fix for "regulator: core: Add regulator_is_equal() helper"

2020-02-11T12:37:30Z

[ Upstream commit 0468e667a5bead9c1b7ded92861b5a98d8d78745 ] Signed-off-by: Stephen Rothwell Link: https://lore.kernel.org/r/20200115120258.0e535fcb@canb.auug.org.au Acked-by: Marek Vasut Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

KVM: Use vcpu-specific gva->hva translation when querying host page size

2020-02-11T12:37:29Z

[ Upstream commit f9b84e19221efc5f493156ee0329df3142085f28 ] Use kvm_vcpu_gfn_to_hva() when retrieving the host page size so that the correct set of memslots is used when handling x86 page faults in SMM. Fixes: 54bf36aac520 ("KVM: x86: use vcpu-specific functions to read/write/translate GFNs") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

io_uring: enable option to only trigger eventfd for async completions

2020-02-11T12:37:28Z

[ Upstream commit f2842ab5b72d7ee5f7f8385c2d4f32c133f5837b ] If an application is using eventfd notifications with poll to know when new SQEs can be issued, it's expecting the following read/writes to complete inline. And with that, it knows that there are events available, and don't want spurious wakeups on the eventfd for those requests. This adds IORING_REGISTER_EVENTFD_ASYNC, which works just like IORING_REGISTER_EVENTFD, except it only triggers notifications for events that happen from async completions (IRQ, or io-wq worker completions). Any completions inline from the submission itself will not trigger notifications. Suggested-by: Mark Papadakis Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

x86/apic/msi: Plug non-maskable MSI affinity race

2020-02-11T12:37:27Z

commit 6f1a4891a5928a5969c87fa5a584844c983ec823 upstream. Evan tracked down a subtle race between the update of the MSI message and the device raising an interrupt internally on PCI devices which do not support MSI masking. The update of the MSI message is non-atomic and consists of either 2 or 3 sequential 32bit wide writes to the PCI config space. - Write address low 32bits - Write address high 32bits (If supported by device) - Write data When an interrupt is migrated then both address and data might change, so the kernel attempts to mask the MSI interrupt first. But for MSI masking is optional, so there exist devices which do not provide it. That means that if the device raises an interrupt internally between the writes then a MSI message is sent built from half updated state. On x86 this can lead to spurious interrupts on the wrong interrupt vector when the affinity setting changes both address and data. As a consequence the device interrupt can be lost causing the device to become stuck or malfunctioning. Evan tried to handle that by disabling MSI accross an MSI message update. That's not feasible because disabling MSI has issues on its own: If MSI is disabled the PCI device is routing an interrupt to the legacy INTx mechanism. The INTx delivery can be disabled, but the disablement is not working on all devices. Some devices lose interrupts when both MSI and INTx delivery are disabled. Another way to solve this would be to enforce the allocation of the same vector on all CPUs in the system for this kind of screwed devices. That could be done, but it would bring back the vector space exhaustion problems which got solved a few years ago. Fortunately the high address (if supported by the device) is only relevant when X2APIC is enabled which implies interrupt remapping. In the interrupt remapping case the affinity setting is happening at the interrupt remapping unit and the PCI MSI message is programmed only once when the PCI device is initialized. That makes it possible to solve it with a two step update: 1) Target the MSI msg to the new vector on the current target CPU 2) Target the MSI msg to the new vector on the new target CPU In both cases writing the MSI message is only changing a single 32bit word which prevents the issue of inconsistency. After writing the final destination it is necessary to check whether the device issued an interrupt while the intermediate state #1 (new vector, current CPU) was in effect. This is possible because the affinity change is always happening on the current target CPU. The code runs with interrupts disabled, so the interrupt can be detected by checking the IRR of the local APIC. If the vector is pending in the IRR then the interrupt is retriggered on the new target CPU by sending an IPI for the associated vector on the target CPU. This can cause spurious interrupts on both the local and the new target CPU. 1) If the new vector is not in use on the local CPU and the device affected by the affinity change raised an interrupt during the transitional state (step #1 above) then interrupt entry code will ignore that spurious interrupt. The vector is marked so that the 'No irq handler for vector' warning is supressed once. 2) If the new vector is in use already on the local CPU then the IRR check might see an pending interrupt from the device which is using this vector. The IPI to the new target CPU will then invoke the handler of the device, which got the affinity change, even if that device did not issue an interrupt 3) If the new vector is in use already on the local CPU and the device affected by the affinity change raised an interrupt during the transitional state (step #1 above) then the handler of the device which uses that vector on the local CPU will be invoked. expose issues in device driver interrupt handlers which are not prepared to handle a spurious interrupt correctly. This not a regression, it's just exposing something which was already broken as spurious interrupts can happen for a lot of reasons and all driver handlers need to be able to deal with them. Reported-by: Evan Green Debugged-by: Evan Green Signed-off-by: Thomas Gleixner Tested-by: Evan Green Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87imkr4s7n.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman