user/sven/linux.git/include, branch v5.8.8

drm/i915: Fix sha_text population code

2020-09-09T17:14:30Z

commit 9ab57658a608f879469ffa22b723c4539c05a58f upstream. This patch fixes a few bugs: 1- We weren't taking into account sha_leftovers when adding multiple ksvs to sha_text. As such, we were or'ing the end of ksv[j - 1] with the beginning of ksv[j] 2- In the sha_leftovers == 2 and sha_leftovers == 3 case, bstatus was being placed on the wrong half of sha_text, overlapping the leftover ksv value 3- In the sha_leftovers == 2 case, we need to manually terminate the byte stream with 0x80 since the hardware doesn't have enough room to add it after writing M0 The upside is that all of the HDCP supported HDMI repeaters I could find on Amazon just strip HDCP anyways, so it turns out to be _really_ hard to hit any of these cases without an MST hub, which is not (yet) supported. Oh, and the sha_leftovers == 1 case works perfectly! Fixes: ee5e5e7a5e0f ("drm/i915: Add HDCP framework + base implementation") Cc: Chris Wilson Cc: Ramalingam C Cc: Daniel Vetter Cc: Sean Paul Cc: Jani Nikula Cc: Joonas Lahtinen Cc: Rodrigo Vivi Cc: intel-gfx@lists.freedesktop.org Cc: # v4.17+ Reviewed-by: Ramalingam C Signed-off-by: Sean Paul Signed-off-by: Ramalingam C Link: https://patchwork.freedesktop.org/patch/msgid/20200818153910.27894-2-sean@poorly.run (cherry picked from commit 1f0882214fd0037b74f245d9be75c31516fed040) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman

libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks

2020-09-09T17:14:30Z

commit 3b5455636fe26ea21b4189d135a424a6da016418 upstream. All three generations of Sandisk SSDs lock up hard intermittently. Experiments showed that disabling NCQ lowered the failure rate significantly and the kernel has been disabling NCQ for some models of SD7's and 8's, which is obviously undesirable. Karthik worked with Sandisk to root cause the hard lockups to trim commands larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which limits max trim size to 128M and applies it to all three generations of Sandisk SSDs. Signed-off-by: Tejun Heo Cc: Karthik Shivaram Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

block: allow for_each_bvec to support zero len bvec

2020-09-09T17:14:29Z

commit 7e24969022cbd61ddc586f14824fc205661bb124 upstream. Block layer usually doesn't support or allow zero-length bvec. Since commit 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()"), iterate_bvec() switches to bvec iterator. However, Al mentioned that 'Zero-length segments are not disallowed' in iov_iter. Fixes for_each_bvec() so that it can move on after seeing one zero length bvec. Fixes: 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()") Reported-by: syzbot Signed-off-by: Ming Lei Tested-by: Tetsuo Handa Cc: Al Viro Cc: Matthew Wilcox Cc: Link: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2262077.html Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

include/linux/log2.h: add missing () around n in roundup_pow_of_two()

2020-09-09T17:14:24Z

[ Upstream commit 428fc0aff4e59399ec719ffcc1f7a5d29a4ee476 ] Otherwise gcc generates warnings if the expression is complicated. Fixes: 312a0c170945 ("[PATCH] LOG2: Alter roundup_pow_of_two() so that it can use a ilog2() on a constant") Signed-off-by: Jason Gunthorpe Signed-off-by: Andrew Morton Link: https://lkml.kernel.org/r/0-v1-8a2697e3c003+41165-log_brackets_jgg@nvidia.com Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

netfilter: nfnetlink: nfnetlink_unicast() reports EAGAIN instead of ENOBUFS

2020-09-09T17:14:19Z

[ Upstream commit ee921183557af39c1a0475f982d43b0fcac25e2e ] Frontend callback reports EAGAIN to nfnetlink to retry a command, this is used to signal that module autoloading is required. Unfortunately, nlmsg_unicast() reports EAGAIN in case the receiver socket buffer gets full, so it enters a busy-loop. This patch updates nfnetlink_unicast() to turn EAGAIN into ENOBUFS and to use nlmsg_unicast(). Remove the flags field in nfnetlink_unicast() since this is always MSG_DONTWAIT in the existing code which is exactly what nlmsg_unicast() passes to netlink_unicast() as parameter. Fixes: 96518518cc41 ("netfilter: add nftables") Reported-by: Phil Sutter Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: nf_tables: fix destination register zeroing

2020-09-09T17:14:15Z

[ Upstream commit 1e105e6afa6c3d32bfb52c00ffa393894a525c27 ] Following bug was reported via irc: nft list ruleset set knock_candidates_ipv4 { type ipv4_addr . inet_service size 65535 elements = { 127.0.0.1 . 123, 127.0.0.1 . 123 } } .. udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 } udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport } It should not have been possible to add a duplicate set entry. After some debugging it turned out that the problem is the immediate value (123) in the second-to-last rule. Concatenations use 32bit registers, i.e. the elements are 8 bytes each, not 6 and it turns out the kernel inserted inet firewall @knock_candidates_ipv4 element 0100007f ffff7b00 : 0 [end] element 0100007f 00007b00 : 0 [end] Note the non-zero upper bits of the first element. It turns out that nft_immediate doesn't zero the destination register, but this is needed when the length isn't a multiple of 4. Furthermore, the zeroing in nft_payload is broken. We can't use [len / 4] = 0 -- if len is a multiple of 4, index is off by one. Skip zeroing in this case and use a conditional instead of (len -1) / 4. Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: nf_tables: incorrect enum nft_list_attributes definition

2020-09-09T17:14:15Z

[ Upstream commit da9125df854ea48a6240c66e8a67be06e2c12c03 ] This should be NFTA_LIST_UNSPEC instead of NFTA_LIST_UNPEC, all other similar attribute definitions are postfixed with _UNSPEC. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

rxrpc: Make rxrpc_kernel_get_srtt() indicate validity

2020-09-09T17:14:14Z

[ Upstream commit 1d4adfaf65746203861c72d9d78de349eb97d528 ] Fix rxrpc_kernel_get_srtt() to indicate the validity of the returned smoothed RTT. If we haven't had any valid samples yet, the SRTT isn't useful. Fixes: c410bf01933e ("rxrpc: Fix the excessive initial retransmission timeout") Signed-off-by: David Howells Signed-off-by: Sasha Levin

rxrpc: Fix loss of RTT samples due to interposed ACK

2020-09-09T17:14:13Z

[ Upstream commit 4700c4d80b7bb171f6996016ef121e1508860b42 ] The Rx protocol has a mechanism to help generate RTT samples that works by a client transmitting a REQUESTED-type ACK when it receives a DATA packet that has the REQUEST_ACK flag set. The peer, however, may interpose other ACKs before transmitting the REQUESTED-ACK, as can be seen in the following trace excerpt: rxrpc_tx_data: c=00000044 DATA d0b5ece8:00000001 00000001 q=00000001 fl=07 rxrpc_rx_ack: c=00000044 00000001 PNG r=00000000 f=00000002 p=00000000 n=0 rxrpc_rx_ack: c=00000044 00000002 REQ r=00000001 f=00000002 p=00000001 n=0 ... DATA packet 1 (q=xx) has REQUEST_ACK set (bit 1 of fl=xx). The incoming ping (labelled PNG) hard-acks the request DATA packet (f=xx exceeds the sequence number of the DATA packet), causing it to be discarded from the Tx ring. The ACK that was requested (labelled REQ, r=xx references the serial of the DATA packet) comes after the ping, but the sk_buff holding the timestamp has gone and the RTT sample is lost. This is particularly noticeable on RPC calls used to probe the service offered by the peer. A lot of peers end up with an unknown RTT because we only ever sent a single RPC. This confuses the server rotation algorithm. Fix this by caching the information about the outgoing packet in RTT calculations in the rxrpc_call struct rather than looking in the Tx ring. A four-deep buffer is maintained and both REQUEST_ACK-flagged DATA and PING-ACK transmissions are recorded in there. When the appropriate response ACK is received, the buffer is checked for a match and, if found, an RTT sample is recorded. If a received ACK refers to a packet with a later serial number than an entry in the cache, that entry is presumed lost and the entry is made available to record a new transmission. ACKs types other than REQUESTED-type and PING-type cause any matching sample to be cancelled as they don't necessarily represent a useful measurement. If there's no space in the buffer on ping/data transmission, the sample base is discarded. Fixes: 50235c4b5a2f ("rxrpc: Obtain RTT data by requesting ACKs on DATA packets") Signed-off-by: David Howells Signed-off-by: Sasha Levin

HID: core: Sanitize event code and type when mapping input

2020-09-05T09:24:01Z

commit 35556bed836f8dc07ac55f69c8d17dce3e7f0e25 upstream. When calling into hid_map_usage(), the passed event code is blindly stored as is, even if it doesn't fit in the associated bitmap. This event code can come from a variety of sources, including devices masquerading as input devices, only a bit more "programmable". Instead of taking the event code at face value, check that it actually fits the corresponding bitmap, and if it doesn't: - spit out a warning so that we know which device is acting up - NULLify the bitmap pointer so that we catch unexpected uses Code paths that can make use of untrusted inputs can now check that the mapping was indeed correct and bail out if not. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman