user/sven/linux.git/include, branch v6.1.43

dma-buf: keep the signaling time of merged fences v3

2023-08-03T08:24:19Z

commit f781f661e8c99b0cb34129f2e374234d61864e77 upstream. Some Android CTS is testing if the signaling time keeps consistent during merges. v2: use the current time if the fence is still in the signaling path and the timestamp not yet available. v3: improve comment, fix one more case to use the correct timestamp Signed-off-by: Christian König Reviewed-by: Luben Tuikov Link: https://patchwork.freedesktop.org/patch/msgid/20230630120041.109216-1-christian.koenig@amd.com Cc: Jindong Yue Signed-off-by: Greg Kroah-Hartman

block: Fix a source code comment in include/uapi/linux/blkzoned.h

2023-08-03T08:24:04Z

[ Upstream commit e0933b526fbfd937c4a8f4e35fcdd49f0e22d411 ] Fix the symbolic names for zone conditions in the blkzoned.h header file. Cc: Hannes Reinecke Cc: Damien Le Moal Fixes: 6a0cb1bc106f ("block: Implement support for zoned block devices") Signed-off-by: Bart Van Assche Reviewed-by: Damien Le Moal Link: https://lore.kernel.org/r/20230706201422.3987341-1-bvanassche@acm.org Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

tcp: Reduce chance of collisions in inet6_hashfn().

2023-08-03T08:24:00Z

[ Upstream commit d11b0df7ddf1831f3e170972f43186dad520bfcc ] For both IPv4 and IPv6 incoming TCP connections are tracked in a hash table with a hash over the source & destination addresses and ports. However, the IPv6 hash is insufficient and can lead to a high rate of collisions. The IPv6 hash used an XOR to fit everything into the 96 bits for the fast jenkins hash, meaning it is possible for an external entity to ensure the hash collides, thus falling back to a linear search in the bucket, which is slow. We take the approach of hash the full length of IPv6 address in __ipv6_addr_jhash() so that all users can benefit from a more secure version. While this may look like it adds overhead, the reality of modern CPUs means that this is unmeasurable in real world scenarios. In simulating with llvm-mca, the increase in cycles for the hashing code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9 on Nehalem (base of ~173). In commit dd6d2910c5e0 ("netfilter: conntrack: switch to siphash") netfilter switched from a jenkins hash to a siphash, but even the faster hsiphash is a more significant overhead (~20-30%) in some preliminary testing. So, in this patch, we keep to the more conservative approach to ensure we don't add much overhead per SYN. In testing, this results in a consistently even spread across the connection buckets. In both testing and real-world scenarios, we have not found any measurable performance impact. Fixes: 08dcdbf6a7b9 ("ipv6: use a stronger hash for tcp") Signed-off-by: Stewart Smith Signed-off-by: Samuel Mendoza-Jonas Suggested-by: Eric Dumazet Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20230721222410.17914-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

vxlan: calculate correct header length for GPE

2023-08-03T08:23:59Z

[ Upstream commit 94d166c5318c6edd1e079df8552233443e909c33 ] VXLAN-GPE does not add an extra inner Ethernet header. Take that into account when calculating header length. This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is cached. In the collect_md mode (which is the only mode that VXLAN-GPE supports), there's no magic auto-setting of the tunnel interface MTU. It can't be, since the destination and thus the underlying interface may be different for each packet. So, the administrator is responsible for setting the correct tunnel interface MTU. Apparently, the administrators are capable enough to calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36). They set the tunnel interface MTU to 1464. If you run a TCP stream over such interface, it's then segmented according to the MTU 1464, i.e. producing 1514 bytes frames. Which is okay, this still fits the lower MTU. However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as the header size and thus incorrectly calculates the frame size to be 1528. This leads to ICMP too big message being generated (locally), PMTU of 1450 to be cached and the TCP stream to be resegmented. The fix is to use the correct actual header size, especially for skb_tunnel_check_pmtu calculation. Fixes: e1e5314de08ba ("vxlan: implement GPE") Signed-off-by: Jiri Benc Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

pwm: Add a stub for devm_pwmchip_add()

2023-08-03T08:23:48Z

commit 88da4e8113110d5f4ebdd2f8cd0899e300cd1954 upstream. The devm_pwmchip_add() can be called by a module that optionally instantiates PWM chip. In the case of CONFIG_PWM=n, the compilation can't be performed. Hence, add a necessary stub. Signed-off-by: Andy Shevchenko Acked-by: Thierry Reding Reviewed-by: Mika Westerberg Acked-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman

drm/dp_mst: Clear MSG_RDY flag before sending new message

2023-07-27T06:50:52Z

commit 72f1de49ffb90b29748284f27f1d6b829ab1de95 upstream. [Why] The sequence for collecting down_reply from source perspective should be: Request_n->repeat (get partial reply of Request_n->clear message ready flag to ack DPRX that the message is received) till all partial replies for Request_n are received->new Request_n+1. Now there is chance that drm_dp_mst_hpd_irq() will fire new down request in the tx queue when the down reply is incomplete. Source is restricted to generate interveleaved message transactions so we should avoid it. Also, while assembling partial reply packets, reading out DPCD DOWN_REP Sideband MSG buffer + clearing DOWN_REP_MSG_RDY flag should be wrapped up as a complete operation for reading out a reply packet. Kicking off a new request before clearing DOWN_REP_MSG_RDY flag might be risky. e.g. If the reply of the new request has overwritten the DPRX DOWN_REP Sideband MSG buffer before source writing one to clear DOWN_REP_MSG_RDY flag, source then unintentionally flushes the reply for the new request. Should handle the up request in the same way. [How] Separete drm_dp_mst_hpd_irq() into 2 steps. After acking the MST IRQ event, driver calls drm_dp_mst_hpd_irq_send_new_request() and might trigger drm_dp_mst_kick_tx() only when there is no on going message transaction. Changes since v1: * Reworked on review comments received -> Adjust the fix to let driver explicitly kick off new down request when mst irq event is handled and acked -> Adjust the commit message Changes since v2: * Adjust the commit message * Adjust the naming of the divided 2 functions and add a new input parameter "ack". * Adjust code flow as per review comments. Changes since v3: * Update the function description of drm_dp_mst_hpd_irq_handle_event Changes since v4: * Change ack of drm_dp_mst_hpd_irq_handle_event() to be an array align the size of esi[] Signed-off-by: Wayne Lin Reviewed-by: Lyude Paul Acked-by: Jani Nikula Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher Signed-off-by: Mario Limonciello Signed-off-by: Greg Kroah-Hartman

tcp: annotate data-races around fastopenq.max_qlen

2023-07-27T06:50:49Z

[ Upstream commit 70f360dd7042cb843635ece9d28335a4addff9eb ] This field can be read locklessly. Fixes: 1536e2857bd3 ("tcp: Add a TCP_FASTOPEN socket option to get a max backlog on its listner") Signed-off-by: Eric Dumazet Link: https://lore.kernel.org/r/20230719212857.3943972-12-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

tcp: annotate data-races around tp->notsent_lowat

2023-07-27T06:50:48Z

[ Upstream commit 1aeb87bc1440c5447a7fa2d6e3c2cca52cbd206b ] tp->notsent_lowat can be read locklessly from do_tcp_getsockopt() and tcp_poll(). Fixes: c9bee3b7fdec ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by: Eric Dumazet Link: https://lore.kernel.org/r/20230719212857.3943972-10-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

tcp: annotate data-races around tp->keepalive_probes

2023-07-27T06:50:48Z

[ Upstream commit 6e5e1de616bf5f3df1769abc9292191dfad9110a ] do_tcp_getsockopt() reads tp->keepalive_probes while another cpu might change its value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Link: https://lore.kernel.org/r/20230719212857.3943972-6-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

tcp: annotate data-races around tp->keepalive_intvl

2023-07-27T06:50:48Z

[ Upstream commit 5ecf9d4f52ff2f1d4d44c9b68bc75688e82f13b4 ] do_tcp_getsockopt() reads tp->keepalive_intvl while another cpu might change its value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Link: https://lore.kernel.org/r/20230719212857.3943972-5-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin