user/sven/linux.git/include, branch v6.1.5

efi: random: combine bootloader provided RNG seed with RNG protocol output

2023-01-12T11:02:58Z

commit 196dff2712ca5a2e651977bb2fe6b05474111a83 upstream. Instead of blindly creating the EFI random seed configuration table if the RNG protocol is implemented and works, check whether such a EFI configuration table was provided by an earlier boot stage and if so, concatenate the existing and the new seeds, leaving it up to the core code to mix it in and credit it the way it sees fit. This can be used for, e.g., systemd-boot, to pass an additional seed to Linux in a way that can be consumed by the kernel very early. In that case, the following definitions should be used to pass the seed to the EFI stub: struct linux_efi_random_seed { u32 size; // of the 'seed' array in bytes u8 seed[]; }; The memory for the struct must be allocated as EFI_ACPI_RECLAIM_MEMORY pool memory, and the address of the struct in memory should be installed as a EFI configuration table using the following GUID: LINUX_EFI_RANDOM_SEED_TABLE_GUID 1ce1e5bc-7ceb-42f2-81e5-8aadf180f57b Note that doing so is safe even on kernels that were built without this patch applied, but the seed will simply be overwritten with a seed derived from the EFI RNG protocol, if available. The recommended seed size is 32 bytes, and seeds larger than 512 bytes are considered corrupted and ignored entirely. In order to preserve forward secrecy, seeds from previous bootloaders are memzero'd out, and in order to preserve memory, those older seeds are also freed from memory. Freeing from memory without first memzeroing is not safe to do, as it's possible that nothing else will ever overwrite those pages used by EFI. Reviewed-by: Jason A. Donenfeld [ardb: incorporate Jason's followup changes to extend the maximum seed size on the consumer end, memzero() it and drop a needless printk] Signed-off-by: Ard Biesheuvel Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

drm/plane-helper: Add the missing declaration of drm_atomic_state

2023-01-12T11:02:52Z

commit 4e699e34f923188175986ad8a74ab99f7034075e upstream. Add the missing declaration of struct drm_atomic_state to fix the compile error below: error: 'struct drm_atomic_state' declared inside parameter list will not be visible outside of this definition or declaration [-Werror] Signed-off-by: Ma Jun Reviewed-by: Thomas Zimmermann Signed-off-by: Thomas Zimmermann Fixes: 8401bd361f59 ("drm/plane-helper: Add a drm_plane_helper_atomic_check() helper") Cc: Javier Martinez Canillas Cc: Thomas Zimmermann Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: David Airlie Cc: Daniel Vetter Cc: dri-devel@lists.freedesktop.org Cc: # v6.1+ Link: https://patchwork.freedesktop.org/patch/msgid/20221216030526.1335609-1-majun@amd.com Signed-off-by: Greg Kroah-Hartman

net: dsa: tag_qca: fix wrong MGMT_DATA2 size

2023-01-12T11:02:47Z

commit d9dba91be71f03cc75bcf39fc0d5d99ff33f1ae0 upstream. It was discovered that MGMT_DATA2 can contain up to 28 bytes of data instead of the 12 bytes written in the Documentation by accounting the limit of 16 bytes declared in Documentation subtracting the first 4 byte in the packet header. Update the define with the real world value. Tested-by: Ronald Wahl Fixes: c2ee8181fddb ("net: dsa: tag_qca: add define for handling mgmt Ethernet packet") Signed-off-by: Christian Marangi Cc: stable@vger.kernel.org # v5.18+ Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ACPI: video: Allow GPU drivers to report no panels

2023-01-12T11:02:39Z

[ Upstream commit 00a734104af7d878f1252d49eff9298785c6cbdc ] The current logic for the ACPI backlight detection will create a backlight device if no native or vendor drivers have created 8 seconds after the system has booted if the ACPI tables included backlight control methods. If the GPU drivers have loaded, they may be able to report whether any LCD panels were found. Allow using this information to factor in whether to enable the fallback logic for making an acpi_video0 backlight device. Suggested-by: Hans de Goede Signed-off-by: Mario Limonciello Reviewed-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

netfilter: ipset: Rework long task execution when adding/deleting entries

2023-01-12T11:02:26Z

[ Upstream commit 5e29dc36bd5e2166b834ceb19990d9e68a734d7d ] When adding/deleting large number of elements in one step in ipset, it can take a reasonable amount of time and can result in soft lockup errors. The patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete") tried to fix it by limiting the max elements to process at all. However it was not enough, it is still possible that we get hung tasks. Lowering the limit is not reasonable, so the approach in this patch is as follows: rely on the method used at resizing sets and save the state when we reach a smaller internal batch limit, unlock/lock and proceed from the saved state. Thus we can avoid long continuous tasks and at the same time removed the limit to add/delete large number of elements in one step. The nfnl mutex is held during the whole operation which prevents one to issue other ipset commands in parallel. Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete") Reported-by: syzbot+9204e7399656300bf271@syzkaller.appspotmail.com Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

filelock: new helper: vfs_inode_has_locks

2023-01-12T11:02:22Z

[ Upstream commit ab1ddef98a715eddb65309ffa83267e4e84a571e ] Ceph has a need to know whether a particular inode has any locks set on it. It's currently tracking that by a num_locks field in its filp->private_data, but that's problematic as it tries to decrement this field when releasing locks and that can race with the file being torn down. Add a new vfs_inode_has_locks helper that just returns whether any locks are currently held on the inode. Reviewed-by: Xiubo Li Reviewed-by: Christoph Hellwig Signed-off-by: Jeff Layton Stable-dep-of: 461ab10ef7e6 ("ceph: switch to vfs_inode_has_locks() to fix file lock bug") Signed-off-by: Sasha Levin

tcp: Add TIME_WAIT sockets in bhash2.

2023-01-12T11:02:15Z

[ Upstream commit 936a192f974018b4f6040f6f77b1cc1e75bd8666 ] Jiri Slaby reported regression of bind() with a simple repro. [0] The repro creates a TIME_WAIT socket and tries to bind() a new socket with the same local address and port. Before commit 28044fc1d495 ("net: Add a bhash2 table hashed by port and address"), the bind() failed with -EADDRINUSE, but now it succeeds. The cited commit should have put TIME_WAIT sockets into bhash2; otherwise, inet_bhash2_conflict() misses TIME_WAIT sockets when validating bind() requests if the address is not a wildcard one. The straight option is to move sk_bind2_node from struct sock to struct sock_common to add twsk to bhash2 as implemented as RFC. [1] However, the binary layout change in the struct sock could affect performances moving hot fields on different cachelines. To avoid that, we add another TIME_WAIT list in inet_bind2_bucket and check it while validating bind(). [0]: https://lore.kernel.org/netdev/6b971a4e-c7d8-411e-1f92-fda29b5b2fb9@kernel.org/ [1]: https://lore.kernel.org/netdev/20221221151258.25748-2-kuniyu@amazon.com/ Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Reported-by: Jiri Slaby Suggested-by: Paolo Abeni Signed-off-by: Kuniyuki Iwashima Acked-by: Joanne Koong Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net/mlx5: E-Switch, properly handle ingress tagged packets on VST

2023-01-12T11:02:09Z

[ Upstream commit 1f0ae22ab470946143485a02cc1cd7e05c0f9120 ] Fix SRIOV VST mode behavior to insert cvlan when a guest tag is already present in the frame. Previous VST mode behavior was to drop packets or override existing tag, depending on the device version. In this patch we fix this behavior by correctly building the HW steering rule with a push vlan action, or for older devices we ask the FW to stack the vlan when a vlan is already present. Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes") Fixes: dfcb1ed3c331 ("net/mlx5: E-Switch, Vport ingress/egress ACLs rules for VST mode") Signed-off-by: Moshe Shemesh Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

netfilter: nf_tables: honor set timeout and garbage collection updates

2023-01-12T11:01:58Z

[ Upstream commit 123b99619cca94bdca0bf7bde9abe28f0a0dfe06 ] Set timeout and garbage collection interval updates are ignored on updates. Add transaction to update global set element timeout and garbage collection interval. Fixes: 96518518cc41 ("netfilter: add nftables") Suggested-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

netfilter: nf_tables: consolidate set description

2023-01-12T11:01:57Z

[ Upstream commit bed4a63ea4ae77cfe5aae004ef87379f0655260a ] Add the following fields to the set description: - key type - data type - object type - policy - gc_int: garbage collection interval) - timeout: element timeout This prepares for stricter set type checks on updates in a follow up patch. Signed-off-by: Pablo Neira Ayuso Stable-dep-of: f6594c372afd ("netfilter: nf_tables: perform type checking for existing sets") Signed-off-by: Sasha Levin