user/sven/linux.git/include, branch v6.12.35

ipv6: replace ipcm6_init calls with ipcm6_init_sk

2025-06-27T10:11:41Z

commit 096208592b09c2f5fc0c1a174694efa41c04209d upstream. This initializes tclass and dontfrag before cmsg parsing, removing the need for explicit checks against -1 in each caller. Leave hlimit set to -1, because its full initialization (in ip6_sk_dst_hoplimit) requires more state (dst, flowi6, ..). This also prepares for calling sockcm_init in a follow-on patch. Signed-off-by: Willem de Bruijn Reviewed-by: David Ahern Link: https://patch.msgid.link/20250214222720.3205500-7-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

erofs: remove unused trace event erofs_destroy_inode

2025-06-27T10:11:40Z

commit 30b58444807c93bffeaba7d776110f2a909d2f9a upstream. The trace event `erofs_destroy_inode` was added but remains unused. This unused event contributes approximately 5KB to the kernel module size. Reported-by: Steven Rostedt Closes: https://lore.kernel.org/r/20250612224906.15000244@batman.local.home Fixes: 13f06f48f7bf ("staging: erofs: support tracepoint") Cc: stable@vger.kernel.org Reviewed-by: Hongbo Li Signed-off-by: Gao Xiang Link: https://lore.kernel.org/r/20250617054056.3232365-1-hsiangkao@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman

bpf: Fix L4 csum update on IPv6 in CHECKSUM_COMPLETE

2025-06-27T10:11:40Z

commit ead7f9b8de65632ef8060b84b0c55049a33cfea1 upstream. In Cilium, we use bpf_csum_diff + bpf_l4_csum_replace to, among other things, update the L4 checksum after reverse SNATing IPv6 packets. That use case is however not currently supported and leads to invalid skb->csum values in some cases. This patch adds support for IPv6 address changes in bpf_l4_csum_update via a new flag. When calling bpf_l4_csum_replace in Cilium, it ends up calling inet_proto_csum_replace_by_diff: 1: void inet_proto_csum_replace_by_diff(__sum16 *sum, struct sk_buff *skb, 2: __wsum diff, bool pseudohdr) 3: { 4: if (skb->ip_summed != CHECKSUM_PARTIAL) { 5: csum_replace_by_diff(sum, diff); 6: if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr) 7: skb->csum = ~csum_sub(diff, skb->csum); 8: } else if (pseudohdr) { 9: *sum = ~csum_fold(csum_add(diff, csum_unfold(*sum))); 10: } 11: } The bug happens when we're in the CHECKSUM_COMPLETE state. We've just updated one of the IPv6 addresses. The helper now updates the L4 header checksum on line 5. Next, it updates skb->csum on line 7. It shouldn't. For an IPv6 packet, the updates of the IPv6 address and of the L4 checksum will cancel each other. The checksums are set such that computing a checksum over the packet including its checksum will result in a sum of 0. So the same is true here when we update the L4 checksum on line 5. We'll update it as to cancel the previous IPv6 address update. Hence skb->csum should remain untouched in this case. The same bug doesn't affect IPv4 packets because, in that case, three fields are updated: the IPv4 address, the IP checksum, and the L4 checksum. The change to the IPv4 address and one of the checksums still cancel each other in skb->csum, but we're left with one checksum update and should therefore update skb->csum accordingly. That's exactly what inet_proto_csum_replace_by_diff does. This special case for IPv6 L4 checksums is also described atop inet_proto_csum_replace16, the function we should be using in this case. This patch introduces a new bpf_l4_csum_replace flag, BPF_F_IPV6, to indicate that we're updating the L4 checksum of an IPv6 packet. When the flag is set, inet_proto_csum_replace_by_diff will skip the skb->csum update. Fixes: 7d672345ed295 ("bpf: add generic bpf_csum_diff helper") Signed-off-by: Paul Chaignon Acked-by: Daniel Borkmann Link: https://patch.msgid.link/96a6bc3a443e6f0b21ff7b7834000e17fb549e05.1748509484.git.paul.chaignon@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Paul Chaignon Signed-off-by: Greg Kroah-Hartman

net: Fix checksum update for ILA adj-transport

2025-06-27T10:11:40Z

commit 6043b794c7668c19dabc4a93c75b924a19474d59 upstream. During ILA address translations, the L4 checksums can be handled in different ways. One of them, adj-transport, consist in parsing the transport layer and updating any found checksum. This logic relies on inet_proto_csum_replace_by_diff and produces an incorrect skb->csum when in state CHECKSUM_COMPLETE. This bug can be reproduced with a simple ILA to SIR mapping, assuming packets are received with CHECKSUM_COMPLETE: $ ip a show dev eth0 14: eth0@if15: mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 62:ae:35:9e:0f:8d brd ff:ff:ff:ff:ff:ff link-netnsid 0 inet6 3333:0:0:1::c078/64 scope global valid_lft forever preferred_lft forever inet6 fd00:10:244:1::c078/128 scope global nodad valid_lft forever preferred_lft forever inet6 fe80::60ae:35ff:fe9e:f8d/64 scope link proto kernel_ll valid_lft forever preferred_lft forever $ ip ila add loc_match fd00:10:244:1 loc 3333:0:0:1 \ csum-mode adj-transport ident-type luid dev eth0 Then I hit [fd00:10:244:1::c078]:8000 with a server listening only on [3333:0:0:1::c078]:8000. With the bug, the SYN packet is dropped with SKB_DROP_REASON_TCP_CSUM after inet_proto_csum_replace_by_diff changed skb->csum. The translation and drop are visible on pwru [1] traces: IFACE TUPLE FUNC eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ipv6_rcv eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) ip6_rcv_core eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) nf_hook_slow eth0:9 [fd00:10:244:3::3d8]:51420->[fd00:10:244:1::c078]:8000(tcp) inet_proto_csum_replace_by_diff eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_early_demux eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_route_input eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_input_finish eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ip6_protocol_deliver_rcu eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) raw6_local_deliver eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) ipv6_raw_deliver eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) tcp_v6_rcv eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) __skb_checksum_complete eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skb_reason(SKB_DROP_REASON_TCP_CSUM) eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_head_state eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_release_data eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) skb_free_head eth0:9 [fd00:10:244:3::3d8]:51420->[3333:0:0:1::c078]:8000(tcp) kfree_skbmem This is happening because inet_proto_csum_replace_by_diff is updating skb->csum when it shouldn't. The L4 checksum is updated such that it "cancels" the IPv6 address change in terms of checksum computation, so the impact on skb->csum is null. Note this would be different for an IPv4 packet since three fields would be updated: the IPv4 address, the IP checksum, and the L4 checksum. Two would cancel each other and skb->csum would still need to be updated to take the L4 checksum change into account. This patch fixes it by passing an ipv6 flag to inet_proto_csum_replace_by_diff, to skip the skb->csum update if we're in the IPv6 case. Note the behavior of the only other user of inet_proto_csum_replace_by_diff, the BPF subsystem, is left as is in this patch and fixed in the subsequent patch. With the fix, using the reproduction from above, I can confirm skb->csum is not touched by inet_proto_csum_replace_by_diff and the TCP SYN proceeds to the application after the ILA translation. Link: https://github.com/cilium/pwru [1] Fixes: 65d7ab8de582 ("net: Identifier Locator Addressing module") Signed-off-by: Paul Chaignon Acked-by: Daniel Borkmann Link: https://patch.msgid.link/b5539869e3550d46068504feb02d37653d939c0b.1748509484.git.paul.chaignon@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Paul Chaignon Signed-off-by: Greg Kroah-Hartman

mm/hugetlb: unshare page tables during VMA split, not before

2025-06-27T10:11:40Z

commit 081056dc00a27bccb55ccc3c6f230a3d5fd3f7e0 upstream. Currently, __split_vma() triggers hugetlb page table unsharing through vm_ops->may_split(). This happens before the VMA lock and rmap locks are taken - which is too early, it allows racing VMA-locked page faults in our process and racing rmap walks from other processes to cause page tables to be shared again before we actually perform the split. Fix it by explicitly calling into the hugetlb unshare logic from __split_vma() in the same place where THP splitting also happens. At that point, both the VMA and the rmap(s) are write-locked. An annoying detail is that we can now call into the helper hugetlb_unshare_pmds() from two different locking contexts: 1. from hugetlb_split(), holding: - mmap lock (exclusively) - VMA lock - file rmap lock (exclusively) 2. hugetlb_unshare_all_pmds(), which I think is designed to be able to call us with only the mmap lock held (in shared mode), but currently only runs while holding mmap lock (exclusively) and VMA lock Backporting note: This commit fixes a racy protection that was introduced in commit b30c14cd6102 ("hugetlb: unshare some PMDs when splitting VMAs"); that commit claimed to fix an issue introduced in 5.13, but it should actually also go all the way back. [jannh@google.com: v2] Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page") Signed-off-by: Jann Horn Cc: Liam Howlett Reviewed-by: Lorenzo Stoakes Reviewed-by: Oscar Salvador Cc: Lorenzo Stoakes Cc: Vlastimil Babka Cc: [b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs] Cc: Signed-off-by: Andrew Morton [stable backport: added missing include] Signed-off-by: Jann Horn Signed-off-by: Greg Kroah-Hartman

atm: Revert atm_account_tx() if copy_from_iter_full() fails.

2025-06-27T10:11:39Z

commit 7851263998d4269125fd6cb3fdbfc7c6db853859 upstream. In vcc_sendmsg(), we account skb->truesize to sk->sk_wmem_alloc by atm_account_tx(). It is expected to be reverted by atm_pop_raw() later called by vcc->dev->ops->send(vcc, skb). However, vcc_sendmsg() misses the same revert when copy_from_iter_full() fails, and then we will leak a socket. Let's factorise the revert part as atm_return_tx() and call it in the failure path. Note that the corresponding sk_wmem_alloc operation can be found in alloc_tx() as of the blamed commit. $ git blame -L:alloc_tx net/atm/common.c c55fa3cccbc2c~ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Simon Horman Closes: https://lore.kernel.org/netdev/20250614161959.GR414686@horms.kernel.org/ Signed-off-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20250616182147.963333-3-kuni1840@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

Revert "mac80211: Dynamically set CoDel parameters per station"

2025-06-27T10:11:33Z

[ Upstream commit 4876376988081d636a4c4e5f03a5556386b49087 ] This reverts commit 484a54c2e597dbc4ace79c1687022282905afba0. The CoDel parameter change essentially disables CoDel on slow stations, with some questionable assumptions, as Dave pointed out in [0]. Quoting from there: But here are my pithy comments as to why this part of mac80211 is so wrong... static void sta_update_codel_params(struct sta_info *sta, u32 thr) { - if (thr && thr < STA_SLOW_THRESHOLD * sta->local->num_sta) { 1) sta->local->num_sta is the number of associated, rather than active, stations. "Active" stations in the last 50ms or so, might have been a better thing to use, but as most people have far more than that associated, we end up with really lousy codel parameters, all the time. Mistake numero uno! 2) The STA_SLOW_THRESHOLD was completely arbitrary in 2016. - sta->cparams.target = MS2TIME(50); This, by itself, was probably not too bad. 30ms might have been better, at the time, when we were battling powersave etc, but 20ms was enough, really, to cover most scenarios, even where we had low rate 2Ghz multicast to cope with. Even then, codel has a hard time finding any sane drop rate at all, with a target this high. - sta->cparams.interval = MS2TIME(300); But this was horrible, a total mistake, that is leading to codel being completely ineffective in almost any scenario on clients or APS. 100ms, even 80ms, here, would be vastly better than this insanity. I'm seeing 5+seconds of delay accumulated in a bunch of otherwise happily fq-ing APs.... 100ms of observed jitter during a flow is enough. Certainly (in 2016) there were interactions with powersave that I did not understand, and still don't, but if you are transmitting in the first place, powersave shouldn't be a problemmmm..... - sta->cparams.ecn = false; At the time we were pretty nervous about ecn, I'm kind of sanguine about it now, and reliably indicating ecn seems better than turning it off for any reason. [...] In production, on p2p wireless, I've had 8ms and 80ms for target and interval for years now, and it works great. I think Dave's arguments above are basically sound on the face of it, and various experimentation with tighter CoDel parameters in the OpenWrt community have show promising results[1]. So I don't think there's any reason to keep this parameter fiddling; hence this revert. [0] https://lore.kernel.org/linux-wireless/CAA93jw6NJ2cmLmMauz0xAgC2MGbBq6n0ZiZzAdkK0u4b+O2yXg@mail.gmail.com/ [1] https://forum.openwrt.org/t/reducing-multiplexing-latencies-still-further-in-wifi/133605/130 Suggested-By: Dave Taht In-memory-of: Dave Taht Signed-off-by: Toke Høiland-Jørgensen Link: https://patch.msgid.link/20250403183930.197716-1-toke@toke.dk Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

f2fs: fix to bail out in get_new_segment()

2025-06-27T10:11:32Z

[ Upstream commit bb5eb8a5b222fa5092f60d5555867a05ebc3bdf2 ] ------------[ cut here ]------------ WARNING: CPU: 3 PID: 579 at fs/f2fs/segment.c:2832 new_curseg+0x5e8/0x6dc pc : new_curseg+0x5e8/0x6dc Call trace: new_curseg+0x5e8/0x6dc f2fs_allocate_data_block+0xa54/0xe28 do_write_page+0x6c/0x194 f2fs_do_write_node_page+0x38/0x78 __write_node_page+0x248/0x6d4 f2fs_sync_node_pages+0x524/0x72c f2fs_write_checkpoint+0x4bc/0x9b0 __checkpoint_and_complete_reqs+0x80/0x244 issue_checkpoint_thread+0x8c/0xec kthread+0x114/0x1bc ret_from_fork+0x10/0x20 get_new_segment() detects inconsistent status in between free_segmap and free_secmap, let's record such error into super block, and bail out get_new_segment() instead of continue using the segment. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin

tcp: add receive queue awareness in tcp_rcv_space_adjust()

2025-06-27T10:11:30Z

[ Upstream commit ea33537d82921e71f852ea2ed985acc562125efe ] If the application can not drain fast enough a TCP socket queue, tcp_rcv_space_adjust() can overestimate tp->rcvq_space.space. Then sk->sk_rcvbuf can grow and hit tcp_rmem[2] for no good reason. Fix this by taking into acount the number of available bytes. Keeping sk->sk_rcvbuf at the right size allows better cache efficiency. Signed-off-by: Eric Dumazet Reviewed-by: Wei Wang Link: https://patch.msgid.link/20250513193919.1089692-5-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ACPI: Add missing prototype for non CONFIG_SUSPEND/CONFIG_X86 case

2025-06-27T10:11:27Z

[ Upstream commit e1bdbbc98279164d910d2de82a745f090a8b249f ] acpi_register_lps0_dev() and acpi_unregister_lps0_dev() may be used in drivers that don't require CONFIG_SUSPEND or compile on !X86. Add prototypes for those cases. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202502191627.fRgoBwcZ-lkp@intel.com/ Signed-off-by: Mario Limonciello Link: https://patch.msgid.link/20250407183656.1503446-1-superm1@kernel.org Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin