user/sven/linux.git/include, branch v6.6.72

mm: hugetlb: independent PMD page table shared count

2025-01-17T12:36:26Z

[ Upstream commit 59d9094df3d79443937add8700b2ef1a866b1081 ] The folio refcount may be increased unexpectly through try_get_folio() by caller such as split_huge_pages. In huge_pmd_unshare(), we use refcount to check whether a pmd page table is shared. The check is incorrect if the refcount is increased by the above caller, and this can cause the page table leaked: BUG: Bad page state in process sh pfn:109324 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324 flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff) page_type: f2(table) raw: 017ffff800000000 0000000000000000 0000000000000000 0000000000000000 raw: 0000000000000066 0000000000000000 00000000f2000000 0000000000000000 page dumped because: nonzero mapcount ... CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G B 6.13.0-rc2master+ #7 Tainted: [B]=BAD_PAGE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 dump_stack+0x18/0x28 bad_page+0x8c/0x130 free_page_is_bad_report+0xa4/0xb0 free_unref_page+0x3cc/0x620 __folio_put+0xf4/0x158 split_huge_pages_all+0x1e0/0x3e8 split_huge_pages_write+0x25c/0x2d8 full_proxy_write+0x64/0xd8 vfs_write+0xcc/0x280 ksys_write+0x70/0x110 __arm64_sys_write+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0x128 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x190/0x198 The issue may be triggered by damon, offline_page, page_idle, etc, which will increase the refcount of page table. 1. The page table itself will be discarded after reporting the "nonzero mapcount". 2. The HugeTLB page mapped by the page table miss freeing since we treat the page table as shared and a shared page table will not be unmapped. Fix it by introducing independent PMD page table shared count. As described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390 gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv pmds, so we can reuse the field as pt_share_count. Link: https://lkml.kernel.org/r/20241216071147.3984217-1-liushixin2@huawei.com Fixes: 39dde65c9940 ("[PATCH] shared page table for hugetlb page") Signed-off-by: Liu Shixin Cc: Kefeng Wang Cc: Ken Chen Cc: Muchun Song Cc: Nanyong Sun Cc: Jane Chu Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin

mm/hugetlb: enforce that PMD PT sharing has split PMD PT locks

2025-01-17T12:36:26Z

[ Upstream commit 188cac58a8bcdf82c7f63275b68f7a46871e45d6 ] Sharing page tables between processes but falling back to per-MM page table locks cannot possibly work. So, let's make sure that we do have split PMD locks by adding a new Kconfig option and letting that depend on CONFIG_SPLIT_PMD_PTLOCKS. Link: https://lkml.kernel.org/r/20240726150728.3159964-3-david@redhat.com Signed-off-by: David Hildenbrand Acked-by: Mike Rapoport (Microsoft) Cc: Alexander Viro Cc: Borislav Petkov Cc: Boris Ostrovsky Cc: Christian Brauner Cc: Christophe Leroy Cc: Dave Hansen Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Juergen Gross Cc: Michael Ellerman Cc: Muchun Song Cc: "Naveen N. Rao" Cc: Nicholas Piggin Cc: Oscar Salvador Cc: Peter Xu Cc: Russell King Cc: Thomas Gleixner Signed-off-by: Andrew Morton Stable-dep-of: 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count") Signed-off-by: Sasha Levin

pgtable: fix s390 ptdesc field comments

2025-01-17T12:36:26Z

[ Upstream commit 38ca8a185389716e9f7566bce4bb0085f71da61d ] Patch series "minor ptdesc updates", v3. This patch (of 2): Since commit d08d4e7cd6bf ("s390/mm: use full 4KB page for 2KB PTE") there is no fragmented page tracking on s390. Fix the corresponding comments. Link: https://lkml.kernel.org/r/cover.1700594815.git.agordeev@linux.ibm.com Link: https://lkml.kernel.org/r/2eead241f3a45bed26c7911cf66bded1e35670b8.1700594815.git.agordeev@linux.ibm.com Signed-off-by: Alexander Gordeev Suggested-by: Heiko Carstens Cc: Gerald Schaefer Cc: Vishal Moola (Oracle) Signed-off-by: Andrew Morton Stable-dep-of: 59d9094df3d7 ("mm: hugetlb: independent PMD page table shared count") Signed-off-by: Sasha Levin

scsi: ufs: qcom: Power off the PHY if it was already powered on in ufs_qcom_power_up_sequence()

2025-01-17T12:36:17Z

commit 7bac65687510038390a0a54cbe14fba08d037e46 upstream. PHY might already be powered on during ufs_qcom_power_up_sequence() in a couple of cases: 1. During UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH quirk 2. Resuming from spm_lvl = 5 suspend In those cases, it is necessary to call phy_power_off() and phy_exit() in ufs_qcom_power_up_sequence() function to power off the PHY before calling phy_init() and phy_power_on(). Case (1) is doing it via ufs_qcom_reinit_notify() callback, but case (2) is not handled. So to satisfy both cases, call phy_power_off() and phy_exit() if the phy_count is non-zero. And with this change, the reinit_notify() callback is no longer needed. This fixes the below UFS resume failure with spm_lvl = 5: ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: -5 ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume returns -5 ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error -5 Cc: stable@vger.kernel.org # 6.3 Fixes: baf5ddac90dc ("scsi: ufs: ufs-qcom: Add support for reinitializing the UFS device") Reported-by: Ram Kumar Dwivedi Tested-by: Amit Pundir # on SM8550-HDK Reviewed-by: Bart Van Assche Tested-by: Neil Armstrong # on SM8550-QRD Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20241219-ufs-qcom-suspend-fix-v3-1-63c4b95a70b9@linaro.org Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

tcp/dccp: allow a connection when sk_max_ack_backlog is zero

2025-01-17T12:36:12Z

[ Upstream commit 3479c7549fb1dfa7a1db4efb7347c7b8ef50de4b ] If the backlog of listen() is set to zero, sk_acceptq_is_full() allows one connection to be made, but inet_csk_reqsk_queue_is_full() does not. When the net.ipv4.tcp_syncookies is zero, inet_csk_reqsk_queue_is_full() will cause an immediate drop before the sk_acceptq_is_full() check in tcp_conn_request(), resulting in no connection can be made. This patch tries to keep consistent with 64a146513f8f ("[NET]: Revert incorrect accept queue backlog changes."). Link: https://lore.kernel.org/netdev/20250102080258.53858-1-kuniyu@amazon.com/ Fixes: ef547f2ac16b ("tcp: remove max_qlen_log") Signed-off-by: Zhongqiu Duan Reviewed-by: Kuniyuki Iwashima Reviewed-by: Jason Xing Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20250102171426.915276-1-dzq.aishenghu0@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

tcp/dccp: complete lockless accesses to sk->sk_max_ack_backlog

2025-01-17T12:36:12Z

[ Upstream commit 9a79c65f00e2b036e17af3a3a607d7d732b7affb ] Since commit 099ecf59f05b ("net: annotate lockless accesses to sk->sk_max_ack_backlog") decided to handle the sk_max_ack_backlog locklessly, there is one more function mostly called in TCP/DCCP cases. So this patch completes it:) Signed-off-by: Jason Xing Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20240331090521.71965-1-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski Stable-dep-of: 3479c7549fb1 ("tcp/dccp: allow a connection when sk_max_ack_backlog is zero") Signed-off-by: Sasha Levin

memblock: use numa_valid_node() helper to check for invalid node ID

2025-01-17T12:36:09Z

commit 8043832e2a123fd9372007a29192f2f3ba328cd6 upstream. Introduce numa_valid_node(nid) that verifies that nid is a valid node ID and use that instead of comparing nid parameter with either NUMA_NO_NODE or MAX_NUMNODES. This makes the checks for valid node IDs consistent and more robust and allows to get rid of multiple WARNings. Suggested-by: Linus Torvalds Signed-off-by: Mike Rapoport (IBM) Signed-off-by: Greg Kroah-Hartman

x86/hyperv: Fix hv tsc page based sched_clock for hibernation

2025-01-10T13:31:36Z

commit bcc80dec91ee745b3d66f3e48f0ec2efdea97149 upstream. read_hv_sched_clock_tsc() assumes that the Hyper-V clock counter is bigger than the variable hv_sched_clock_offset, which is cached during early boot, but depending on the timing this assumption may be false when a hibernated VM starts again (the clock counter starts from 0 again) and is resuming back (Note: hv_init_tsc_clocksource() is not called during hibernation/resume); consequently, read_hv_sched_clock_tsc() may return a negative integer (which is interpreted as a huge positive integer since the return type is u64) and new kernel messages are prefixed with huge timestamps before read_hv_sched_clock_tsc() grows big enough (which typically takes several seconds). Fix the issue by saving the Hyper-V clock counter just before the suspend, and using it to correct the hv_sched_clock_offset in resume. This makes hv tsc page based sched_clock continuous and ensures that post resume, it starts from where it left off during suspend. Override x86_platform.save_sched_clock_state and x86_platform.restore_sched_clock_state routines to correct this as soon as possible. Note: if Invariant TSC is available, the issue doesn't happen because 1) we don't register read_hv_sched_clock_tsc() for sched clock: See commit e5313f1c5404 ("clocksource/drivers/hyper-v: Rework clocksource and sched clock setup"); 2) the common x86 code adjusts TSC similarly: see __restore_processor_state() -> tsc_verify_tsc_adjust(true) and x86_platform.restore_sched_clock_state(). Cc: stable@vger.kernel.org Fixes: 1349401ff1aa ("clocksource/drivers/hyper-v: Suspend/resume Hyper-V clocksource for hibernation") Co-developed-by: Dexuan Cui Signed-off-by: Dexuan Cui Signed-off-by: Naman Jain Reviewed-by: Michael Kelley Link: https://lore.kernel.org/r/20240917053917.76787-1-namjain@linux.microsoft.com Signed-off-by: Wei Liu Message-ID: <20240917053917.76787-1-namjain@linux.microsoft.com> Signed-off-by: Greg Kroah-Hartman

Revert "x86/hyperv: Fix hv tsc page based sched_clock for hibernation"

2025-01-10T13:31:36Z

This reverts commit 6681113633dc738ec95fe33104843a1e25acef3b which is commit bcc80dec91ee745b3d66f3e48f0ec2efdea97149 upstream. The dependant patch before this one caused build errors in the 6.6.y tree, so revert this for now so that we can fix them up properly. Reported-by: Ignat Korchagin Link: https://lore.kernel.org/r/3DB3A6D3-0D3A-4682-B4FA-407B2D3263B2@cloudflare.com Reported-by: Lars Wendler Link: https://lore.kernel.org/r/20250110103328.0e3906a8@chagall.paradoxon.rec Reported-by: Chris Clayton Link: https://lore.kernel.org/r/10c7be00-b1f8-4389-801b-fb2d0b22468d@googlemail.com Cc: Dexuan Cui Cc: Naman Jain Cc: Michael Kelley Cc: Wei Liu Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "bpf: support non-r10 register spill/fill to/from stack in precision tracking"

2025-01-09T12:32:06Z

Revert commit ecc2aeeaa08a355d84d3ca9c3d2512399a194f29 which is commit 41f6f64e6999a837048b1bd13a2f8742964eca6b upstream. Levi reported that commit ecc2aeeaa08a ("bpf: support non-r10 register spill/fill to/from stack in precision tracking") cause eBPF program that previously loads successfully in stable 6.6 now fails to load, when the same program also loads successfully in v6.13-rc5. Revert ecc2aeeaa08a until the problem has been probably figured out and resolved. Fixes: ecc2aeeaa08a ("bpf: support non-r10 register spill/fill to/from stack in precision tracking") Reported-by: Levi Zim Link: https://lore.kernel.org/stable/MEYP282MB2312C3C8801476C4F262D6E1C6162@MEYP282MB2312.AUSP282.PROD.OUTLOOK.COM/ Signed-off-by: Shung-Hsi Yu Signed-off-by: Greg Kroah-Hartman