user/sven/linux.git/init/main.c, branch v5.7.10

Merge tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-05-17T18:08:29Z

Pull x86 fix from Borislav Petkov: "A single fix for early boot crashes of kernels built with gcc10 and stack protector enabled" * tag 'x86_urgent_for_v5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix early boot crash on gcc-10, third try

x86: Fix early boot crash on gcc-10, third try

2020-05-15T09:48:01Z

... or the odyssey of trying to disable the stack protector for the function which generates the stack canary value. The whole story started with Sergei reporting a boot crash with a kernel built with gcc-10: Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013 Call Trace: dump_stack panic ? start_secondary __stack_chk_fail start_secondary secondary_startup_64 -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary This happens because gcc-10 tail-call optimizes the last function call in start_secondary() - cpu_startup_entry() - and thus emits a stack canary check which fails because the canary value changes after the boot_init_stack_canary() call. To fix that, the initial attempt was to mark the one function which generates the stack canary with: __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused) however, using the optimize attribute doesn't work cumulatively as the attribute does not add to but rather replaces previously supplied optimization options - roughly all -fxxx options. The key one among them being -fno-omit-frame-pointer and thus leading to not present frame pointer - frame pointer which the kernel needs. The next attempt to prevent compilers from tail-call optimizing the last function call cpu_startup_entry(), shy of carving out start_secondary() into a separate compilation unit and building it with -fno-stack-protector, was to add an empty asm(""). This current solution was short and sweet, and reportedly, is supported by both compilers but we didn't get very far this time: future (LTO?) optimization passes could potentially eliminate this, which leads us to the third attempt: having an actual memory barrier there which the compiler cannot ignore or move around etc. That should hold for a long time, but hey we said that about the other two solutions too so... Reported-by: Sergei Trofimovich Signed-off-by: Borislav Petkov Tested-by: Kalle Valo Cc: Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org

bootconfig: Fix to prevent warning message if no bootconfig option

2020-05-12T14:42:51Z

Commit de462e5f1071 ("bootconfig: Fix to remove bootconfig data from initrd while boot") causes a cosmetic regression on dmesg, which warns "no bootconfig data" message without bootconfig cmdline option. Fix setup_boot_config() by moving no bootconfig check after commandline option check. Link: http://lkml.kernel.org/r/9b1ba335-071d-c983-89a4-2677b522dcc8@molgen.mpg.de Link: http://lkml.kernel.org/r/158916116468.21787.14558782332170588206.stgit@devnote2 Fixes: de462e5f1071 ("bootconfig: Fix to remove bootconfig data from initrd while boot") Reported-by: Paul Menzel Reviewed-by: Paul Menzel Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware)

bootconfig: Fix to remove bootconfig data from initrd while boot

2020-05-06T13:04:11Z

If there is a bootconfig data in the tail of initrd/initramfs, initrd image sanity check caused an error while decompression stage as follows. [ 0.883882] Unpacking initramfs... [ 2.696429] Initramfs unpacking failed: invalid magic at start of compressed archive This error will be ignored if CONFIG_BLK_DEV_RAM=n, but CONFIG_BLK_DEV_RAM=y the kernel failed to mount rootfs and causes a panic. To fix this issue, shrink down the initrd_end for removing tailing bootconfig data while boot the kernel. Link: http://lkml.kernel.org/r/158788401014.24243.17424755854115077915.stgit@devnote2 Cc: Borislav Petkov Cc: Kees Cook Cc: Ingo Molnar Cc: Andrew Morton Cc: stable@vger.kernel.org Fixes: 7684b8582c24 ("bootconfig: Load boot config from the tail of initrd") Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware)

printk: queue wake_up_klogd irq_work only if per-CPU areas are ready

2020-04-10T20:18:57Z

printk_deferred(), similarly to printk_safe/printk_nmi, does not immediately attempt to print a new message on the consoles, avoiding calls into non-reentrant kernel paths, e.g. scheduler or timekeeping, which potentially can deadlock the system. Those printk() flavors, instead, rely on per-CPU flush irq_work to print messages from safer contexts. For same reasons (recursive scheduler or timekeeping calls) printk() uses per-CPU irq_work in order to wake up user space syslog/kmsg readers. However, only printk_safe/printk_nmi do make sure that per-CPU areas have been initialised and that it's safe to modify per-CPU irq_work. This means that, for instance, should printk_deferred() be invoked "too early", that is before per-CPU areas are initialised, printk_deferred() will perform illegal per-CPU access. Lech Perczak [0] reports that after commit 1b710b1b10ef ("char/random: silence a lockdep splat with printk()") user-space syslog/kmsg readers are not able to read new kernel messages. The reason is printk_deferred() being called too early (as was pointed out by Petr and John). Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU areas are initialized. Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/ Reported-by: Lech Perczak Signed-off-by: Sergey Senozhatsky Tested-by: Jann Horn Reviewed-by: Petr Mladek Cc: Greg Kroah-Hartman Cc: Theodore Ts'o Cc: John Ogness Signed-off-by: Linus Torvalds

tools/bootconfig: Show line and column in parse error

2020-03-03T22:38:42Z

Show line and column when we got a parse error in bootconfig tool. Current lib/bootconfig shows the parse error with byte offset, but that is not human readable. This makes xbc_init() not showing error message itself but able to pass the error message and position to caller, so that the caller can decode it and show the error message with line number and columns. With this patch, bootconfig tool shows an error with line:column as below. $ cat samples/bad-dotword.bconf # do not start keyword with . key { .word = 1 } $ ./bootconfig -a samples/bad-dotword.bconf initrd Parse Error: Invalid keyword at 3:3 Link: http://lkml.kernel.org/r/158323469002.10560.4023923847704522760.stgit@devnote2 Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware)

Merge tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2020-02-26T18:34:42Z

Pull tracing and bootconfig updates: "Fixes and changes to bootconfig before it goes live in a release. Change in API of bootconfig (before it comes live in a release): - Have a magic value "BOOTCONFIG" in initrd to know a bootconfig exists - Set CONFIG_BOOT_CONFIG to 'n' by default - Show error if "bootconfig" on cmdline but not compiled in - Prevent redefining the same value - Have a way to append values - Added a SELECT BLK_DEV_INITRD to fix a build failure Synthetic event fixes: - Switch to raw_smp_processor_id() for recording CPU value in preempt section. (No care for what the value actually is) - Fix samples always recording u64 values - Fix endianess - Check number of values matches number of fields - Fix a printing bug Fix of trace_printk() breaking postponed start up tests Make a function static that is only used in a single file" * tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue bootconfig: Add append value operator support bootconfig: Prohibit re-defining value on same key bootconfig: Print array as multiple commands for legacy command line bootconfig: Reject subkey and value on same parent key tools/bootconfig: Remove unneeded error message silencer bootconfig: Add bootconfig magic word for indicating bootconfig explicitly bootconfig: Set CONFIG_BOOT_CONFIG=n by default tracing: Clear trace_state when starting trace bootconfig: Mark boot_config_checksum() static tracing: Disable trace_printk() on post poned tests tracing: Have synthetic event test use raw_smp_processor_id() tracing: Fix number printing bug in print_synth_event() tracing: Check that number of vals matches number of synth event fields tracing: Make synth_event trace functions endian-correct tracing: Make sure synth_event_trace() example always uses u64

bootconfig: Print array as multiple commands for legacy command line

2020-02-20T22:56:29Z

Print arraied values as multiple same options for legacy kernel command line. With this rule, if the "kernel.*" and "init.*" array entries in bootconfig are printed out as multiple same options, e.g. kernel { console = "ttyS0,115200" console += "tty0" } will be correctly converted to console="ttyS0,115200" console="tty0" in the kernel command line. Link: http://lkml.kernel.org/r/158220118213.26565.8163300497009463916.stgit@devnote2 Reported-by: Borislav Petkov Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware)

bootconfig: Add bootconfig magic word for indicating bootconfig explicitly

2020-02-20T22:52:34Z

Add bootconfig magic word to the end of bootconfig on initrd image for indicating explicitly the bootconfig is there. Also tools/bootconfig treats wrong size or wrong checksum or parse error as an error, because if there is a bootconfig magic word, there must be a bootconfig. The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word. Thus the block image of the initrd file with bootconfig is as follows. [Initrd][bootconfig][size][csum][#BOOTCONFIG\n] Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2 Suggested-by: Steven Rostedt Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware)

bootconfig: Set CONFIG_BOOT_CONFIG=n by default

2020-02-20T22:52:12Z

Set CONFIG_BOOT_CONFIG=n by default. This also warns user if CONFIG_BOOT_CONFIG=n but "bootconfig" is given in the kernel command line. Link: http://lkml.kernel.org/r/158220111291.26565.9036889083940367969.stgit@devnote2 Suggested-by: Steven Rostedt Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware)