user/sven/linux.git/init, branch v4.14.295

random: handle latent entropy and command line from random_init()

2022-06-25T09:46:40Z

commit 2f14062bb14b0fcfcc21e6dc7d5b5c0d25966164 upstream. Currently, start_kernel() adds latent entropy and the command line to the entropy bool *after* the RNG has been initialized, deferring when it's actually used by things like stack canaries until the next time the pool is seeded. This surely is not intended. Rather than splitting up which entropy gets added where and when between start_kernel() and random_init(), just do everything in random_init(), which should eliminate these kinds of bugs in the future. While we're at it, rename the awkwardly titled "rand_initialize()" to the more standard "random_init()" nomenclature. Reviewed-by: Dominik Brodowski Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

init: call time_init() before rand_initialize()

2022-06-25T09:46:38Z

commit fe222a6ca2d53c38433cba5d3be62a39099e708e upstream. Currently time_init() is called after rand_initialize(), but rand_initialize() makes use of the timer on various platforms, and sometimes this timer needs to be initialized by time_init() first. In order for random_get_entropy() to not return zero during early boot when it's potentially used as an entropy source, reverse the order of these two calls. The block doing random initialization was right before time_init() before, so changing the order shouldn't have any complicated effects. Cc: Andrew Morton Reviewed-by: Stafford Horne Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

random: move rand_initialize() earlier

2022-06-25T09:46:26Z

commit d55535232c3dbde9a523a9d10d68670f5fe5dec3 upstream. Right now rand_initialize() is run as an early_initcall(), but it only depends on timekeeping_init() (for mixing ktime_get_real() into the pools). However, the call to boot_init_stack_canary() for stack canary initialization runs earlier, which triggers a warning at boot: random: get_random_bytes called from start_kernel+0x357/0x548 with crng_init=0 Instead, this moves rand_initialize() to after timekeeping_init(), and moves canary initialization here as well. Note that this warning may still remain for machines that do not have UEFI RNG support (which initializes the RNG pools during setup_arch()), or for x86 machines without RDRAND (or booting without "random.trust=on" or CONFIG_RANDOM_TRUST_CPU=y). Signed-off-by: Kees Cook Signed-off-by: Theodore Ts'o Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

init/main.c: return 1 from handled __setup() functions

2022-04-20T07:08:28Z

[ Upstream commit f9a40b0890658330c83c95511f9d6b396610defc ] initcall_blacklist() should return 1 to indicate that it handled its cmdline arguments. set_debug_rodata() should return 1 to indicate that it handled its cmdline arguments. Print a warning if the option string is invalid. This prevents these strings from being added to the 'init' program's environment as they are not init arguments/parameters. Link: https://lkml.kernel.org/r/20220221050901.23985-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Cc: Ingo Molnar Cc: Greg Kroah-Hartman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

bpf: Add kconfig knob for disabling unpriv bpf by default

2022-02-16T11:44:50Z

commit 08389d888287c3823f80b0216766b71e17f0aba5 upstream. Add a kconfig knob which allows for unprivileged bpf to be disabled by default. If set, the knob sets /proc/sys/kernel/unprivileged_bpf_disabled to value of 2. This still allows a transition of 2 -> {0,1} through an admin. Similarly, this also still keeps 1 -> {1} behavior intact, so that once set to permanently disabled, it cannot be undone aside from a reboot. We've also added extra2 with max of 2 for the procfs handler, so that an admin still has a chance to toggle between 0 <-> 2. Either way, as an additional alternative, applications can make use of CAP_BPF that we added a while ago. Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/74ec548079189e4e4dffaeb42b8987bb3c852eee.1620765074.git.daniel@iogearbox.net [fllinden@amazon.com: backported to 4.14] Signed-off-by: Frank van der Linden Signed-off-by: Greg Kroah-Hartman

pid: take a reference when initializing `cad_pid`

2021-06-10T10:43:51Z

commit 0711f0d7050b9e07c44bc159bbc64ac0a1022c7f upstream. During boot, kernel_init_freeable() initializes `cad_pid` to the init task's struct pid. Later on, we may change `cad_pid` via a sysctl, and when this happens proc_do_cad_pid() will increment the refcount on the new pid via get_pid(), and will decrement the refcount on the old pid via put_pid(). As we never called get_pid() when we initialized `cad_pid`, we decrement a reference we never incremented, can therefore free the init task's struct pid early. As there can be dangling references to the struct pid, we can later encounter a use-after-free (e.g. when delivering signals). This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to have been around since the conversion of `cad_pid` to struct pid in commit 9ec52099e4b8 ("[PATCH] replace cad_pid by a struct pid") from the pre-KASAN stone age of v2.6.19. Fix this by getting a reference to the init task's struct pid when we assign it to `cad_pid`. Full KASAN splat below. ================================================================== BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline] BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273 CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1 Hardware name: linux,dummy-virt (DT) Call trace: ns_of_pid include/linux/pid.h:153 [inline] task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509 do_notify_parent+0x308/0xe60 kernel/signal.c:1950 exit_notify kernel/exit.c:682 [inline] do_exit+0x2334/0x2bd0 kernel/exit.c:845 do_group_exit+0x108/0x2c8 kernel/exit.c:922 get_signal+0x4e4/0x2a88 kernel/signal.c:2781 do_signal arch/arm64/kernel/signal.c:882 [inline] do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936 work_pending+0xc/0x2dc Allocated by task 0: slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516 slab_alloc_node mm/slub.c:2907 [inline] slab_alloc mm/slub.c:2915 [inline] kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920 alloc_pid+0xdc/0xc00 kernel/pid.c:180 copy_process+0x2794/0x5e18 kernel/fork.c:2129 kernel_clone+0x194/0x13c8 kernel/fork.c:2500 kernel_thread+0xd4/0x110 kernel/fork.c:2552 rest_init+0x44/0x4a0 init/main.c:687 arch_call_rest_init+0x1c/0x28 start_kernel+0x520/0x554 init/main.c:1064 0x0 Freed by task 270: slab_free_hook mm/slub.c:1562 [inline] slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600 slab_free mm/slub.c:3161 [inline] kmem_cache_free+0x224/0x8e0 mm/slub.c:3177 put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114 put_pid+0x30/0x48 kernel/pid.c:109 proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401 proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591 proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617 call_write_iter include/linux/fs.h:1977 [inline] new_sync_write+0x3ac/0x510 fs/read_write.c:518 vfs_write fs/read_write.c:605 [inline] vfs_write+0x9c4/0x1018 fs/read_write.c:585 ksys_write+0x124/0x240 fs/read_write.c:658 __do_sys_write fs/read_write.c:670 [inline] __se_sys_write fs/read_write.c:667 [inline] __arm64_sys_write+0x78/0xb0 fs/read_write.c:667 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall arch/arm64/kernel/syscall.c:49 [inline] el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129 do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168 el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416 el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432 el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701 The buggy address belongs to the object at ffff23794dda0000 which belongs to the cache pid of size 224 The buggy address is located 4 bytes inside of 224-byte region [ffff23794dda0000, ffff23794dda00e0) The buggy address belongs to the page: page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4dda0 head:(____ptrval____) order:1 compound_mapcount:0 flags: 0x3fffc0000010200(slab|head) raw: 03fffc0000010200 dead000000000100 dead000000000122 ffff23794d40d080 raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff23794dd9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff23794dd9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff23794dda0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff23794dda0080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff23794dda0100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 ================================================================== Link: https://lkml.kernel.org/r/20210524172230.38715-1-mark.rutland@arm.com Fixes: 9ec52099e4b8678a ("[PATCH] replace cad_pid by a struct pid") Signed-off-by: Mark Rutland Acked-by: Christian Brauner Cc: Cedric Le Goater Cc: Christian Brauner Cc: Eric W. Biederman Cc: Kees Cook Cc: Paul Mackerras Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

init/Kconfig: make COMPILE_TEST depend on HAS_IOMEM

2021-04-10T11:20:12Z

commit ea29b20a828511de3348334e529a3d046a180416 upstream. I read the commit log of the following two: - bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML") - 334ef6ed06fa ("init/Kconfig: make COMPILE_TEST depend on !S390") Both are talking about HAS_IOMEM dependency missing in many drivers. So, 'depends on HAS_IOMEM' seems the direct, sensible solution to me. This does not change the behavior of UML. UML still cannot enable COMPILE_TEST because it does not provide HAS_IOMEM. The current dependency for S390 is too strong. Under the condition of CONFIG_PCI=y, S390 provides HAS_IOMEM, hence can enable COMPILE_TEST. I also removed the meaningless 'default n'. Link: https://lkml.kernel.org/r/20210224140809.1067582-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada Cc: Heiko Carstens Cc: Guenter Roeck Cc: Arnd Bergmann Cc: Kees Cook Cc: Daniel Borkmann Cc: Johannes Weiner Cc: KP Singh Cc: Nathan Chancellor Cc: Nick Terrell Cc: Quentin Perret Cc: Valentin Schneider Cc: "Enrico Weigelt, metux IT consult" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

init/Kconfig: make COMPILE_TEST depend on !S390

2021-04-10T11:20:12Z

commit 334ef6ed06fa1a54e35296b77b693bcf6d63ee9e upstream. While allmodconfig and allyesconfig build for s390 there are also various bots running compile tests with randconfig, where PCI is disabled. This reveals that a lot of drivers should actually depend on HAS_IOMEM. Adding this to each device driver would be a never ending story, therefore just disable COMPILE_TEST for s390. The reasoning is more or less the same as described in commit bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML"). Reported-by: kernel test robot Suggested-by: Arnd Bergmann Signed-off-by: Heiko Carstens Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

printk: reduce LOG_BUF_SHIFT range for H8300

2020-11-05T10:06:55Z

[ Upstream commit 550c10d28d21bd82a8bb48debbb27e6ed53262f6 ] The .bss section for the h8300 is relatively small. A value of CONFIG_LOG_BUF_SHIFT that is larger than 19 will create a static printk ringbuffer that is too large. Limit the range appropriately for the H8300. Reported-by: kernel test robot Signed-off-by: John Ogness Reviewed-by: Sergey Senozhatsky Acked-by: Steven Rostedt (VMware) Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20200812073122.25412-1-john.ogness@linutronix.de Signed-off-by: Sasha Levin

x86: Fix early boot crash on gcc-10, third try

2020-05-20T06:17:15Z

commit a9a3ed1eff3601b63aea4fb462d8b3b92c7c1e7e upstream. ... or the odyssey of trying to disable the stack protector for the function which generates the stack canary value. The whole story started with Sergei reporting a boot crash with a kernel built with gcc-10: Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013 Call Trace: dump_stack panic ? start_secondary __stack_chk_fail start_secondary secondary_startup_64 -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary This happens because gcc-10 tail-call optimizes the last function call in start_secondary() - cpu_startup_entry() - and thus emits a stack canary check which fails because the canary value changes after the boot_init_stack_canary() call. To fix that, the initial attempt was to mark the one function which generates the stack canary with: __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused) however, using the optimize attribute doesn't work cumulatively as the attribute does not add to but rather replaces previously supplied optimization options - roughly all -fxxx options. The key one among them being -fno-omit-frame-pointer and thus leading to not present frame pointer - frame pointer which the kernel needs. The next attempt to prevent compilers from tail-call optimizing the last function call cpu_startup_entry(), shy of carving out start_secondary() into a separate compilation unit and building it with -fno-stack-protector, was to add an empty asm(""). This current solution was short and sweet, and reportedly, is supported by both compilers but we didn't get very far this time: future (LTO?) optimization passes could potentially eliminate this, which leads us to the third attempt: having an actual memory barrier there which the compiler cannot ignore or move around etc. That should hold for a long time, but hey we said that about the other two solutions too so... Reported-by: Sergei Trofimovich Signed-off-by: Borislav Petkov Tested-by: Kalle Valo Cc: Link: https://lkml.kernel.org/r/20200314164451.346497-1-slyfox@gentoo.org Signed-off-by: Greg Kroah-Hartman