user/sven/linux.git/kernel/Makefile, branch v3.2.46

Merge branch 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

2011-10-28T19:02:27Z

* 'devel-stable' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (178 commits) ARM: 7139/1: fix compilation with CONFIG_ARM_ATAG_DTB_COMPAT and large TEXT_OFFSET ARM: gic, local timers: use the request_percpu_irq() interface ARM: gic: consolidate PPI handling ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H ARM: mach-s5p64x0: remove mach/memory.h ARM: mach-s3c64xx: remove mach/memory.h ARM: plat-mxc: remove mach/memory.h ARM: mach-prima2: remove mach/memory.h ARM: mach-zynq: remove mach/memory.h ARM: mach-bcmring: remove mach/memory.h ARM: mach-davinci: remove mach/memory.h ARM: mach-pxa: remove mach/memory.h ARM: mach-ixp4xx: remove mach/memory.h ARM: mach-h720x: remove mach/memory.h ARM: mach-vt8500: remove mach/memory.h ARM: mach-s5pc100: remove mach/memory.h ARM: mach-tegra: remove mach/memory.h ARM: plat-tcc: remove mach/memory.h ARM: mach-mmp: remove mach/memory.h ARM: mach-cns3xxx: remove mach/memory.h ... Fix up mostly pretty trivial conflicts in: - arch/arm/Kconfig - arch/arm/include/asm/localtimer.h - arch/arm/kernel/Makefile - arch/arm/mach-shmobile/board-ap4evb.c - arch/arm/mach-u300/core.c - arch/arm/mm/dma-mapping.c - arch/arm/mm/proc-v7.S - arch/arm/plat-omap/Kconfig largely due to some CONFIG option renaming (ie CONFIG_PM_SLEEP -> CONFIG_ARM_CPU_SUSPEND for the arm-specific suspend code etc) and addition of NEED_MACH_MEMORY_H next to HAVE_IDE.

cpu_pm: Add cpu power management notifiers

2011-09-23T06:35:29Z

During some CPU power modes entered during idle, hotplug and suspend, peripherals located in the CPU power domain, such as the GIC, localtimers, and VFP, may be powered down. Add a notifier chain that allows drivers for those peripherals to be notified before and after they may be reset. Notified drivers can include VFP co-processor, interrupt controller and it's PM extensions, local CPU timers context save/restore which shouldn't be interrupted. Hence CPU PM event APIs must be called with interrupts disabled. Signed-off-by: Colin Cross Signed-off-by: Santosh Shilimkar Reviewed-by: Kevin Hilman Tested-and-Acked-by: Shawn Guo Tested-by: Kevin Hilman Tested-by: Vishwanath BS

PM QoS: Move and rename the implementation files

2011-08-25T13:35:03Z

The PM QoS implementation files are better named kernel/power/qos.c and include/linux/pm_qos.h. The PM QoS support is compiled under the CONFIG_PM option. Signed-off-by: Jean Pihet Acked-by: markgross Reviewed-by: Kevin Hilman Signed-off-by: Rafael J. Wysocki

jump label: Reduce the cycle count by changing the link order

2011-08-05T21:57:33Z

In the course of testing jump labels for use with the CFS bandwidth controller, Paul Turner, discovered that using jump labels reduced the branch count and the instruction count, but did not reduce the cycle count or wall time. I noticed that having the jump_label.o included in the kernel but not used in any way still caused this increase in cycle count and wall time. Thus, I moved jump_label.o in the kernel/Makefile, thus changing the link order, and presumably moving it out of hot icache areas. This brought down the cycle count/time as expected. In addition to Paul's testing, I've tested the patch using a single 'static_branch()' in the getppid() path, and basically running tight loops of calls to getppid(). Here are my results for the branch disabled case: With jump labels turned on (CONFIG_JUMP_LABEL), branch disabled: Performance counter stats for 'bash -c /tmp/getppid;true' (50 runs): 3,969,510,217 instructions # 0.864 IPC ( +-0.000% ) 4,592,334,954 cycles ( +- 0.046% ) 751,634,470 branches ( +- 0.000% ) 1.722635797 seconds time elapsed ( +- 0.046% ) Jump labels turned off (CONFIG_JUMP_LABEL not set), branch disabled: Performance counter stats for 'bash -c /tmp/getppid;true' (50 runs): 4,009,611,846 instructions # 0.867 IPC ( +-0.000% ) 4,622,210,580 cycles ( +- 0.012% ) 771,662,904 branches ( +- 0.000% ) 1.734341454 seconds time elapsed ( +- 0.022% ) Signed-off-by: Jason Baron Cc: rth@redhat.com Cc: a.p.zijlstra@chello.nl Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/20110805204040.GG2522@redhat.com Signed-off-by: Ingo Molnar Tested-by: Paul Turner

kernel: prevent unnecessary rebuilding due to config_data.gz

2011-07-19T23:32:32Z

When IKCONFIG is built-in make oldconfig will cause the kernel to be relinked even if .config didn't change. This happens because of a config_data.gz dependency on .config. This patch changes the if_changed to a filechk so that config_data.h is only rebuilt when the contents have actually changed. Signed-off-by: Peter Foley Signed-off-by: Michal Marek

cgroup: remove the ns_cgroup

2011-05-27T00:12:34Z

The ns_cgroup is an annoying cgroup at the namespace / cgroup frontier and leads to some problems: * cgroup creation is out-of-control * cgroup name can conflict when pids are looping * it is not possible to have a single process handling a lot of namespaces without falling in a exponential creation time * we may want to create a namespace without creating a cgroup The ns_cgroup was replaced by a compatibility flag 'clone_children', where a newly created cgroup will copy the parent cgroup values. The userspace has to manually create a cgroup and add a task to the 'tasks' file. This patch removes the ns_cgroup as suggested in the following thread: https://lists.linux-foundation.org/pipermail/containers/2009-June/018616.html The 'cgroup_clone' function is removed because it is no longer used. This is a userspace-visible change. Commit 45531757b45c ("cgroup: notify ns_cgroup deprecated") (merged into 2.6.27) caused the kernel to emit a printk warning users that the feature is planned for removal. Since that time we have heard from XXX users who were affected by this. Signed-off-by: Daniel Lezcano Signed-off-by: Serge E. Hallyn Cc: Eric W. Biederman Cc: Jamal Hadi Salim Reviewed-by: Li Zefan Acked-by: Paul Menage Acked-by: Matt Helsley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

hw breakpoints: Move to kernel/events/

2011-05-03T13:26:43Z

As part of the events sybsystem unification, relocate hw_breakpoint.c into its new destination. Cc: Frederic Weisbecker Signed-off-by: Borislav Petkov

perf: Start the restructuring

2011-05-03T10:59:43Z

mv kernel/perf_event.c -> kernel/events/core.c. From there, all further sensible splitting can happen. The idea is that due to perf_event.c becoming pretty sizable and with the advent of the marriage with ftrace, splitting functionality into its logical parts should help speeding up the unification and to manage the complexity of the subsystem. Signed-off-by: Borislav Petkov

crash_dump: export is_kdump_kernel to modules, consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn

2011-03-24T02:47:19Z

The Xen PV drivers in a crashed HVM guest can not connect to the dom0 backend drivers because both frontend and backend drivers are still in connected state. To run the connection reset function only in case of a crashdump, the is_kdump_kernel() function needs to be available for the PV driver modules. Consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn into kernel/crash_dump.c Also export elfcorehdr_addr to make is_kdump_kernel() usable for modules. Leave 'elfcorehdr' as early_param(). This changes powerpc from __setup() to early_param(). It adds an address range check from x86 also on ia64 and powerpc. [akpm@linux-foundation.org: additional #includes] [akpm@linux-foundation.org: remove elfcorehdr_addr export] [akpm@linux-foundation.org: fix for Tejun's mm/nobootmem.c changes] Signed-off-by: Olaf Hering Cc: Russell King Cc: "Luck, Tony" Cc: Benjamin Herrenschmidt Cc: Paul Mundt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kernel: clean up USE_GENERIC_SMP_HELPERS

2011-01-13T16:03:08Z

For arch which needs USE_GENERIC_SMP_HELPERS, it has to select USE_GENERIC_SMP_HELPERS, rather than leaving a choice to user, since they don't provide their own implementions. Also, move on_each_cpu() to kernel/smp.c, it is strange to put it in kernel/softirq.c. For arch which doesn't use USE_GENERIC_SMP_HELPERS, e.g. blackfin, only on_each_cpu() is compiled. Signed-off-by: Amerigo Wang Cc: David Howells Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Yinghai Lu Cc: Peter Zijlstra Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds