user/sven/linux.git/kernel/bpf/syscall.c, branch v5.16

bpf: Fix toctou on read-only map's constant scalar tracking

2021-11-16T04:47:07Z

Commit a23740ec43ba ("bpf: Track contents of read-only maps as scalars") is checking whether maps are read-only both from BPF program side and user space side, and then, given their content is constant, reading out their data via map->ops->map_direct_value_addr() which is then subsequently used as known scalar value for the register, that is, it is marked as __mark_reg_known() with the read value at verification time. Before a23740ec43ba, the register content was marked as an unknown scalar so the verifier could not make any assumptions about the map content. The current implementation however is prone to a TOCTOU race, meaning, the value read as known scalar for the register is not guaranteed to be exactly the same at a later point when the program is executed, and as such, the prior made assumptions of the verifier with regards to the program will be invalid which can cause issues such as OOB access, etc. While the BPF_F_RDONLY_PROG map flag is always fixed and required to be specified at map creation time, the map->frozen property is initially set to false for the map given the map value needs to be populated, e.g. for global data sections. Once complete, the loader "freezes" the map from user space such that no subsequent updates/deletes are possible anymore. For the rest of the lifetime of the map, this freeze one-time trigger cannot be undone anymore after a successful BPF_MAP_FREEZE cmd return. Meaning, any new BPF_* cmd calls which would update/delete map entries will be rejected with -EPERM since map_get_sys_perms() removes the FMODE_CAN_WRITE permission. This also means that pending update/delete map entries must still complete before this guarantee is given. This corner case is not an issue for loaders since they create and prepare such program private map in successive steps. However, a malicious user is able to trigger this TOCTOU race in two different ways: i) via userfaultfd, and ii) via batched updates. For i) userfaultfd is used to expand the competition interval, so that map_update_elem() can modify the contents of the map after map_freeze() and bpf_prog_load() were executed. This works, because userfaultfd halts the parallel thread which triggered a map_update_elem() at the time where we copy key/value from the user buffer and this already passed the FMODE_CAN_WRITE capability test given at that time the map was not "frozen". Then, the main thread performs the map_freeze() and bpf_prog_load(), and once that had completed successfully, the other thread is woken up to complete the pending map_update_elem() which then changes the map content. For ii) the idea of the batched update is similar, meaning, when there are a large number of updates to be processed, it can increase the competition interval between the two. It is therefore possible in practice to modify the contents of the map after executing map_freeze() and bpf_prog_load(). One way to fix both i) and ii) at the same time is to expand the use of the map's map->writecnt. The latter was introduced in fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY") and further refined in 1f6cb19be2e2 ("bpf: Prevent re-mmap()'ing BPF map as writable for initially r/o mapping") with the rationale to make a writable mmap()'ing of a map mutually exclusive with read-only freezing. The counter indicates writable mmap() mappings and then prevents/fails the freeze operation. Its semantics can be expanded beyond just mmap() by generally indicating ongoing write phases. This would essentially span any parallel regular and batched flavor of update/delete operation and then also have map_freeze() fail with -EBUSY. For the check_mem_access() in the verifier we expand upon the bpf_map_is_rdonly() check ensuring that all last pending writes have completed via bpf_map_write_active() test. Once the map->frozen is set and bpf_map_write_active() indicates a map->writecnt of 0 only then we are really guaranteed to use the map's data as known constants. For map->frozen being set and pending writes in process of still being completed we fall back to marking that register as unknown scalar so we don't end up making assumptions about it. With this, both TOCTOU reproducers from i) and ii) are fixed. Note that the map->writecnt has been converted into a atomic64 in the fix in order to avoid a double freeze_mutex mutex_{un,}lock() pair when updating map->writecnt in the various map update/delete BPF_* cmd flavors. Spanning the freeze_mutex over entire map update/delete operations in syscall side would not be possible due to then causing everything to be serialized. Similarly, something like synchronize_rcu() after setting map->frozen to wait for update/deletes to complete is not possible either since it would also have to span the user copy which can sleep. On the libbpf side, this won't break d66562fba1ce ("libbpf: Add BPF object skeleton support") as the anonymous mmap()-ed "map initialization image" is remapped as a BPF map-backed mmap()-ed memory where for .rodata it's non-writable. Fixes: a23740ec43ba ("bpf: Track contents of read-only maps as scalars") Reported-by: w1tcher.bupt@gmail.com Signed-off-by: Daniel Borkmann Acked-by: Andrii Nakryiko Signed-off-by: Alexei Starovoitov

Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

2021-11-02T02:59:46Z

Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-11-01 We've added 181 non-merge commits during the last 28 day(s) which contain a total of 280 files changed, 11791 insertions(+), 5879 deletions(-). The main changes are: 1) Fix bpf verifier propagation of 64-bit bounds, from Alexei. 2) Parallelize bpf test_progs, from Yucong and Andrii. 3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus. 4) Improve bpf selftests on s390, from Ilya. 5) bloomfilter bpf map type, from Joanne. 6) Big improvements to JIT tests especially on Mips, from Johan. 7) Support kernel module function calls from bpf, from Kumar. 8) Support typeless and weak ksym in light skeleton, from Kumar. 9) Disallow unprivileged bpf by default, from Pawan. 10) BTF_KIND_DECL_TAG support, from Yonghong. 11) Various bpftool cleanups, from Quentin. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits) libbpf: Deprecate AF_XDP support kbuild: Unify options for BTF generation for vmlinux and modules selftests/bpf: Add a testcase for 64-bit bounds propagation issue. bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit. bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off. selftests/bpf: Fix also no-alu32 strobemeta selftest bpf: Add missing map_delete_elem method to bloom filter map selftests/bpf: Add bloom map success test for userspace calls bpf: Add alignment padding for "map_extra" + consolidate holes bpf: Bloom filter map naming fixups selftests/bpf: Add test cases for struct_ops prog bpf: Add dummy BPF STRUCT_OPS for test purpose bpf: Factor out helpers for ctx access checking bpf: Factor out a helper to prepare trampoline for struct_ops prog selftests, bpf: Fix broken riscv build riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h tools, build: Add RISC-V to HOSTARCH parsing riscv, bpf: Increase the maximum number of iterations selftests, bpf: Add one test for sockmap with strparser selftests, bpf: Fix test_txmsg_ingress_parser error ... ==================== Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski

bpf: Add bpf_kallsyms_lookup_name helper

2021-10-28T23:30:06Z

This helper allows us to get the address of a kernel symbol from inside a BPF_PROG_TYPE_SYSCALL prog (used by gen_loader), so that we can relocate typeless ksym vars. Signed-off-by: Kumar Kartikeya Dwivedi Signed-off-by: Alexei Starovoitov Acked-by: Song Liu Link: https://lore.kernel.org/bpf/20211028063501.2239335-2-memxor@gmail.com

bpf: Add bloom filter map implementation

2021-10-28T20:22:49Z

This patch adds the kernel-side changes for the implementation of a bpf bloom filter map. The bloom filter map supports peek (determining whether an element is present in the map) and push (adding an element to the map) operations.These operations are exposed to userspace applications through the already existing syscalls in the following way: BPF_MAP_LOOKUP_ELEM -> peek BPF_MAP_UPDATE_ELEM -> push The bloom filter map does not have keys, only values. In light of this, the bloom filter map's API matches that of queue stack maps: user applications use BPF_MAP_LOOKUP_ELEM/BPF_MAP_UPDATE_ELEM which correspond internally to bpf_map_peek_elem/bpf_map_push_elem, and bpf programs must use the bpf_map_peek_elem and bpf_map_push_elem APIs to query or add an element to the bloom filter map. When the bloom filter map is created, it must be created with a key_size of 0. For updates, the user will pass in the element to add to the map as the value, with a NULL key. For lookups, the user will pass in the element to query in the map as the value, with a NULL key. In the verifier layer, this requires us to modify the argument type of a bloom filter's BPF_FUNC_map_peek_elem call to ARG_PTR_TO_MAP_VALUE; as well, in the syscall layer, we need to copy over the user value so that in bpf_map_peek_elem, we know which specific value to query. A few things to please take note of: * If there are any concurrent lookups + updates, the user is responsible for synchronizing this to ensure no false negative lookups occur. * The number of hashes to use for the bloom filter is configurable from userspace. If no number is specified, the default used will be 5 hash functions. The benchmarks later in this patchset can help compare the performance of using different number of hashes on different entry sizes. In general, using more hashes decreases both the false positive rate and the speed of a lookup. * Deleting an element in the bloom filter map is not supported. * The bloom filter map may be used as an inner map. * The "max_entries" size that is specified at map creation time is used to approximate a reasonable bitmap size for the bloom filter, and is not otherwise strictly enforced. If the user wishes to insert more entries into the bloom filter than "max_entries", they may do so but they should be aware that this may lead to a higher false positive rate. Signed-off-by: Joanne Koong Signed-off-by: Alexei Starovoitov Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20211027234504.30744-2-joannekoong@fb.com

bpf: Use u64_stats_t in struct bpf_prog_stats

2021-10-27T18:13:52Z

Commit 316580b69d0a ("u64_stats: provide u64_stats_t type") fixed possible load/store tearing on 64bit arches. For instance the following C code stats->nsecs += sched_clock() - start; Could be rightfully implemented like this by a compiler, confusing concurrent readers a lot: stats->nsecs += sched_clock(); // arbitrary delay stats->nsecs -= start; Signed-off-by: Eric Dumazet Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20211026214133.3114279-4-eric.dumazet@gmail.com

bpf: Fix potential race in tail call compatibility check

2021-10-26T19:37:28Z

Lorenzo noticed that the code testing for program type compatibility of tail call maps is potentially racy in that two threads could encounter a map with an unset type simultaneously and both return true even though they are inserting incompatible programs. The race window is quite small, but artificially enlarging it by adding a usleep_range() inside the check in bpf_prog_array_compatible() makes it trivial to trigger from userspace with a program that does, essentially: map_fd = bpf_create_map(BPF_MAP_TYPE_PROG_ARRAY, 4, 4, 2, 0); pid = fork(); if (pid) { key = 0; value = xdp_fd; } else { key = 1; value = tc_fd; } err = bpf_map_update_elem(map_fd, &key, &value, 0); While the race window is small, it has potentially serious ramifications in that triggering it would allow a BPF program to tail call to a program of a different type. So let's get rid of it by protecting the update with a spinlock. The commit in the Fixes tag is the last commit that touches the code in question. v2: - Use a spinlock instead of an atomic variable and cmpxchg() (Alexei) v3: - Put lock and the members it protects into an embedded 'owner' struct (Daniel) Fixes: 3324b584b6f6 ("ebpf: misc core cleanup") Reported-by: Lorenzo Bianconi Signed-off-by: Toke Høiland-Jørgensen Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20211026110019.363464-1-toke@redhat.com

bpf: Fix error usage of map_fd and fdget() in generic_map_update_batch()

2021-10-23T00:23:54Z

1. The ufd in generic_map_update_batch() should be read from batch.map_fd; 2. A call to fdget() should be followed by a symmetric call to fdput(). Fixes: aa2e93b8e58e ("bpf: Add generic support for update and delete batch ops") Signed-off-by: Xu Kuohai Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20211019032934.1210517-1-xukuohai@huawei.com

bpf: Add verified_insns to bpf_prog_info and fdinfo

2021-10-21T22:51:47Z

This stat is currently printed in the verifier log and not stored anywhere. To ease consumption of this data, add a field to bpf_prog_aux so it can be exposed via BPF_OBJ_GET_INFO_BY_FD and fdinfo. Signed-off-by: Dave Marchevsky Signed-off-by: Andrii Nakryiko Acked-by: John Fastabend Link: https://lore.kernel.org/bpf/20211020074818.1017682-2-davemarchevsky@fb.com

bpf: Use kvmalloc for map keys in syscalls

2021-08-19T22:09:49Z

Same as previous patch but for the keys. memdup_bpfptr is renamed to kvmemdup_bpfptr (and converted to kvmalloc). Signed-off-by: Stanislav Fomichev Signed-off-by: Daniel Borkmann Acked-by: Song Liu Link: https://lore.kernel.org/bpf/20210818235216.1159202-2-sdf@google.com

bpf: Use kvmalloc for map values in syscall

2021-08-19T22:09:38Z

Use kvmalloc/kvfree for temporary value when manipulating a map via syscall. kmalloc might not be sufficient for percpu maps where the value is big (and further multiplied by hundreds of CPUs). Can be reproduced with netcnt test on qemu with "-smp 255". Signed-off-by: Stanislav Fomichev Signed-off-by: Daniel Borkmann Acked-by: Song Liu Link: https://lore.kernel.org/bpf/20210818235216.1159202-1-sdf@google.com