user/sven/linux.git/kernel/bpf/syscall.c, branch v5.2

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2019-06-17T22:55:34Z

Pull networking fixes from David Miller: "Lots of bug fixes here: 1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer. 2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John Crispin. 3) Use after free in psock backlog workqueue, from John Fastabend. 4) Fix source port matching in fdb peer flow rule of mlx5, from Raed Salem. 5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet. 6) Network header needs to be set for packet redirect in nfp, from John Hurley. 7) Fix udp zerocopy refcnt, from Willem de Bruijn. 8) Don't assume linear buffers in vxlan and geneve error handlers, from Stefano Brivio. 9) Fix TOS matching in mlxsw, from Jiri Pirko. 10) More SCTP cookie memory leak fixes, from Neil Horman. 11) Fix VLAN filtering in rtl8366, from Linus Walluij. 12) Various TCP SACK payload size and fragmentation memory limit fixes from Eric Dumazet. 13) Use after free in pneigh_get_next(), also from Eric Dumazet. 14) LAPB control block leak fix from Jeremy Sowden" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits) lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl ...

bpf: fix unconnected udp hooks

2019-06-06T23:53:12Z

Intention of cgroup bind/connect/sendmsg BPF hooks is to act transparently to applications as also stated in original motivation in 7828f20e3779 ("Merge branch 'bpf-cgroup-bind-connect'"). When recently integrating the latter two hooks into Cilium to enable host based load-balancing with Kubernetes, I ran into the issue that pods couldn't start up as DNS got broken. Kubernetes typically sets up DNS as a service and is thus subject to load-balancing. Upon further debugging, it turns out that the cgroupv2 sendmsg BPF hooks API is currently insufficient and thus not usable as-is for standard applications shipped with most distros. To break down the issue we ran into with a simple example: # cat /etc/resolv.conf nameserver 147.75.207.207 nameserver 147.75.207.208 For the purpose of a simple test, we set up above IPs as service IPs and transparently redirect traffic to a different DNS backend server for that node: # cilium service list ID Frontend Backend 1 147.75.207.207:53 1 => 8.8.8.8:53 2 147.75.207.208:53 1 => 8.8.8.8:53 The attached BPF program is basically selecting one of the backends if the service IP/port matches on the cgroup hook. DNS breaks here, because the hooks are not transparent enough to applications which have built-in msg_name address checks: # nslookup 1.1.1.1 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 [...] ;; connection timed out; no servers could be reached # dig 1.1.1.1 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53 ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53 [...] ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1 ;; global options: +cmd ;; connection timed out; no servers could be reached For comparison, if none of the service IPs is used, and we tell nslookup to use 8.8.8.8 directly it works just fine, of course: # nslookup 1.1.1.1 8.8.8.8 1.1.1.1.in-addr.arpa name = one.one.one.one. In order to fix this and thus act more transparent to the application, this needs reverse translation on recvmsg() side. A minimal fix for this API is to add similar recvmsg() hooks behind the BPF cgroups static key such that the program can track state and replace the current sockaddr_in{,6} with the original service IP. From BPF side, this basically tracks the service tuple plus socket cookie in an LRU map where the reverse NAT can then be retrieved via map value as one example. Side-note: the BPF cgroups static key should be converted to a per-hook static key in future. Same example after this fix: # cilium service list ID Frontend Backend 1 147.75.207.207:53 1 => 8.8.8.8:53 2 147.75.207.208:53 1 => 8.8.8.8:53 Lookups work fine now: # nslookup 1.1.1.1 1.1.1.1.in-addr.arpa name = one.one.one.one. Authoritative answers can be found from: # dig 1.1.1.1 ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 51550 ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1 ;; OPT PSEUDOSECTION: ; EDNS: version: 0, flags:; udp: 512 ;; QUESTION SECTION: ;1.1.1.1. IN A ;; AUTHORITY SECTION: . 23426 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2019052001 1800 900 604800 86400 ;; Query time: 17 msec ;; SERVER: 147.75.207.207#53(147.75.207.207) ;; WHEN: Tue May 21 12:59:38 UTC 2019 ;; MSG SIZE rcvd: 111 And from an actual packet level it shows that we're using the back end server when talking via 147.75.207.20{7,8} front end: # tcpdump -i any udp [...] 12:59:52.698732 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38) 12:59:52.698735 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38) 12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67) 12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67) [...] In order to be flexible and to have same semantics as in sendmsg BPF programs, we only allow return codes in [1,1] range. In the sendmsg case the program is called if msg->msg_name is present which can be the case in both, connected and unconnected UDP. The former only relies on the sockaddr_in{,6} passed via connect(2) if passed msg->msg_name was NULL. Therefore, on recvmsg side, we act in similar way to call into the BPF program whenever a non-NULL msg->msg_name was passed independent of sk->sk_state being TCP_ESTABLISHED or not. Note that for TCP case, the msg->msg_name is ignored in the regular recvmsg path and therefore not relevant. For the case of ip{,v6}_recv_error() paths, picked up via MSG_ERRQUEUE, the hook is not called. This is intentional as it aligns with the same semantics as in case of TCP cgroup BPF hooks right now. This might be better addressed in future through a different bpf_attach_type such that this case can be distinguished from the regular recvmsg paths, for example. Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg") Signed-off-by: Daniel Borkmann Acked-by: Andrey Ignatov Acked-by: Martin KaFai Lau Acked-by: Martynas Pumputis Signed-off-by: Alexei Starovoitov

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295

2019-06-05T15:36:38Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman

bpf: add map_lookup_elem_sys_only for lookups from syscall side

2019-05-14T17:47:29Z

Add a callback map_lookup_elem_sys_only() that map implementations could use over map_lookup_elem() from system call side in case the map implementation needs to handle the latter differently than from the BPF data path. If map_lookup_elem_sys_only() is set, this will be preferred pick for map lookups out of user space. This hook is used in a follow-up fix for LRU map, but once development window opens, we can convert other map types from map_lookup_elem() (here, the one called upon BPF_MAP_LOOKUP_ELEM cmd is meant) over to use the callback to simplify and clean up the latter. Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov

bpf: Introduce bpf sk local storage

2019-04-27T16:07:04Z

After allowing a bpf prog to - directly read the skb->sk ptr - get the fullsock bpf_sock by "bpf_sk_fullsock()" - get the bpf_tcp_sock by "bpf_tcp_sock()" - get the listener sock by "bpf_get_listener_sock()" - avoid duplicating the fields of "(bpf_)sock" and "(bpf_)tcp_sock" into different bpf running context. this patch is another effort to make bpf's network programming more intuitive to do (together with memory and performance benefit). When bpf prog needs to store data for a sk, the current practice is to define a map with the usual 4-tuples (src/dst ip/port) as the key. If multiple bpf progs require to store different sk data, multiple maps have to be defined. Hence, wasting memory to store the duplicated keys (i.e. 4 tuples here) in each of the bpf map. [ The smallest key could be the sk pointer itself which requires some enhancement in the verifier and it is a separate topic. ] Also, the bpf prog needs to clean up the elem when sk is freed. Otherwise, the bpf map will become full and un-usable quickly. The sk-free tracking currently could be done during sk state transition (e.g. BPF_SOCK_OPS_STATE_CB). The size of the map needs to be predefined which then usually ended-up with an over-provisioned map in production. Even the map was re-sizable, while the sk naturally come and go away already, this potential re-size operation is arguably redundant if the data can be directly connected to the sk itself instead of proxy-ing through a bpf map. This patch introduces sk->sk_bpf_storage to provide local storage space at sk for bpf prog to use. The space will be allocated when the first bpf prog has created data for this particular sk. The design optimizes the bpf prog's lookup (and then optionally followed by an inline update). bpf_spin_lock should be used if the inline update needs to be protected. BPF_MAP_TYPE_SK_STORAGE: ----------------------- To define a bpf "sk-local-storage", a BPF_MAP_TYPE_SK_STORAGE map (new in this patch) needs to be created. Multiple BPF_MAP_TYPE_SK_STORAGE maps can be created to fit different bpf progs' needs. The map enforces BTF to allow printing the sk-local-storage during a system-wise sk dump (e.g. "ss -ta") in the future. The purpose of a BPF_MAP_TYPE_SK_STORAGE map is not for lookup/update/delete a "sk-local-storage" data from a particular sk. Think of the map as a meta-data (or "type") of a "sk-local-storage". This particular "type" of "sk-local-storage" data can then be stored in any sk. The main purposes of this map are mostly: 1. Define the size of a "sk-local-storage" type. 2. Provide a similar syscall userspace API as the map (e.g. lookup/update, map-id, map-btf...etc.) 3. Keep track of all sk's storages of this "type" and clean them up when the map is freed. sk->sk_bpf_storage: ------------------ The main lookup/update/delete is done on sk->sk_bpf_storage (which is a "struct bpf_sk_storage"). When doing a lookup, the "map" pointer is now used as the "key" to search on the sk_storage->list. The "map" pointer is actually serving as the "type" of the "sk-local-storage" that is being requested. To allow very fast lookup, it should be as fast as looking up an array at a stable-offset. At the same time, it is not ideal to set a hard limit on the number of sk-local-storage "type" that the system can have. Hence, this patch takes a cache approach. The last search result from sk_storage->list is cached in sk_storage->cache[] which is a stable sized array. Each "sk-local-storage" type has a stable offset to the cache[] array. In the future, a map's flag could be introduced to do cache opt-out/enforcement if it became necessary. The cache size is 16 (i.e. 16 types of "sk-local-storage"). Programs can share map. On the program side, having a few bpf_progs running in the networking hotpath is already a lot. The bpf_prog should have already consolidated the existing sock-key-ed map usage to minimize the map lookup penalty. 16 has enough runway to grow. All sk-local-storage data will be removed from sk->sk_bpf_storage during sk destruction. bpf_sk_storage_get() and bpf_sk_storage_delete(): ------------------------------------------------ Instead of using bpf_map_(lookup|update|delete)_elem(), the bpf prog needs to use the new helper bpf_sk_storage_get() and bpf_sk_storage_delete(). The verifier can then enforce the ARG_PTR_TO_SOCKET argument. The bpf_sk_storage_get() also allows to "create" new elem if one does not exist in the sk. It is done by the new BPF_SK_STORAGE_GET_F_CREATE flag. An optional value can also be provided as the initial value during BPF_SK_STORAGE_GET_F_CREATE. The BPF_MAP_TYPE_SK_STORAGE also supports bpf_spin_lock. Together, it has eliminated the potential use cases for an equivalent bpf_map_update_elem() API (for bpf_prog) in this patch. Misc notes: ---------- 1. map_get_next_key is not supported. From the userspace syscall perspective, the map has the socket fd as the key while the map can be shared by pinned-file or map-id. Since btf is enforced, the existing "ss" could be enhanced to pretty print the local-storage. Supporting a kernel defined btf with 4 tuples as the return key could be explored later also. 2. The sk->sk_lock cannot be acquired. Atomic operations is used instead. e.g. cmpxchg is done on the sk->sk_bpf_storage ptr. Please refer to the source code comments for the details in synchronization cases and considerations. 3. The mem is charged to the sk->sk_omem_alloc as the sk filter does. Benchmark: --------- Here is the benchmark data collected by turning on the "kernel.bpf_stats_enabled" sysctl. Two bpf progs are tested: One bpf prog with the usual bpf hashmap (max_entries = 8192) with the sk ptr as the key. (verifier is modified to support sk ptr as the key That should have shortened the key lookup time.) Another bpf prog is with the new BPF_MAP_TYPE_SK_STORAGE. Both are storing a "u32 cnt", do a lookup on "egress_skb/cgroup" for each egress skb and then bump the cnt. netperf is used to drive data with 4096 connected UDP sockets. BPF_MAP_TYPE_HASH with a modifier verifier (152ns per bpf run) 27: cgroup_skb name egress_sk_map tag 74f56e832918070b run_time_ns 58280107540 run_cnt 381347633 loaded_at 2019-04-15T13:46:39-0700 uid 0 xlated 344B jited 258B memlock 4096B map_ids 16 btf_id 5 BPF_MAP_TYPE_SK_STORAGE in this patch (66ns per bpf run) 30: cgroup_skb name egress_sk_stora tag d4aa70984cc7bbf6 run_time_ns 25617093319 run_cnt 390989739 loaded_at 2019-04-15T13:47:54-0700 uid 0 xlated 168B jited 156B memlock 4096B map_ids 17 btf_id 6 Here is a high-level picture on how are the objects organized: sk ┌──────┐ │ │ │ │ │ │ │*sk_bpf_storage─────▶ bpf_sk_storage └──────┘ ┌───────┐ ┌───────────┤ list │ │ │ │ │ │ │ │ │ │ │ └───────┘ │ │ elem │ ┌────────┐ ├─▶│ snode │ │ ├────────┤ │ │ data │ bpf_map │ ├────────┤ ┌─────────┐ │ │map_node│◀─┬─────┤ list │ │ └────────┘ │ │ │ │ │ │ │ │ elem │ │ │ │ ┌────────┐ │ └─────────┘ └─▶│ snode │ │ ├────────┤ │ bpf_map │ data │ │ ┌─────────┐ ├────────┤ │ │ list ├───────▶│map_node│ │ │ │ └────────┘ │ │ │ │ │ │ elem │ └─────────┘ ┌────────┐ │ ┌─▶│ snode │ │ │ ├────────┤ │ │ │ data │ │ │ ├────────┤ │ │ │map_node│◀─┘ │ └────────┘ │ │ │ ┌───────┐ sk └──────────│ list │ ┌──────┐ │ │ │ │ │ │ │ │ │ │ │ │ └───────┘ │*sk_bpf_storage───────▶bpf_sk_storage └──────┘ Signed-off-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov

bpf: add writable context for raw tracepoints

2019-04-27T02:04:19Z

This is an opt-in interface that allows a tracepoint to provide a safe buffer that can be written from a BPF_PROG_TYPE_RAW_TRACEPOINT program. The size of the buffer must be a compile-time constant, and is checked before allowing a BPF program to attach to a tracepoint that uses this feature. The pointer to this buffer will be the first argument of tracepoints that opt in; the pointer is valid and can be bpf_probe_read() by both BPF_PROG_TYPE_RAW_TRACEPOINT and BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE programs that attach to such a tracepoint, but the buffer to which it points may only be written by the latter. Signed-off-by: Matt Mullins Acked-by: Yonghong Song Signed-off-by: Alexei Starovoitov

bpf: support BPF_PROG_QUERY for BPF_FLOW_DISSECTOR attach_type

2019-04-25T21:49:06Z

target_fd is target namespace. If there is a flow dissector BPF program attached to that namespace, its (single) id is returned. v5: * drop net ref right after rcu unlock (Daniel Borkmann) v4: * add missing put_net (Jann Horn) v3: * add missing inline to skb_flow_dissector_prog_query static def (kbuild test robot ) v2: * don't sleep in rcu critical section (Jakub Kicinski) * check input prog_cnt (exit early) Cc: Jann Horn Signed-off-by: Stanislav Fomichev Signed-off-by: Daniel Borkmann

bpf: Sysctl hook

2019-04-12T20:54:58Z

Containerized applications may run as root and it may create problems for whole host. Specifically such applications may change a sysctl and affect applications in other containers. Furthermore in existing infrastructure it may not be possible to just completely disable writing to sysctl, instead such a process should be gradual with ability to log what sysctl are being changed by a container, investigate, limit the set of writable sysctl to currently used ones (so that new ones can not be changed) and eventually reduce this set to zero. The patch introduces new program type BPF_PROG_TYPE_CGROUP_SYSCTL and attach type BPF_CGROUP_SYSCTL to solve these problems on cgroup basis. New program type has access to following minimal context: struct bpf_sysctl { __u32 write; }; Where @write indicates whether sysctl is being read (= 0) or written (= 1). Helpers to access sysctl name and value will be introduced separately. BPF_CGROUP_SYSCTL attach point is added to sysctl code right before passing control to ctl_table->proc_handler so that BPF program can either allow or deny access to sysctl. Suggested-by: Roman Gushchin Signed-off-by: Andrey Ignatov Signed-off-by: Alexei Starovoitov

bpf: support input __sk_buff context in BPF_PROG_TEST_RUN

2019-04-11T08:21:40Z

Add new set of arguments to bpf_attr for BPF_PROG_TEST_RUN: * ctx_in/ctx_size_in - input context * ctx_out/ctx_size_out - output context The intended use case is to pass some meta data to the test runs that operate on skb (this has being brought up on recent LPC). For programs that use bpf_prog_test_run_skb, support __sk_buff input and output. Initially, from input __sk_buff, copy _only_ cb and priority into skb, all other non-zero fields are prohibited (with EINVAL). If the user has set ctx_out/ctx_size_out, copy the potentially modified __sk_buff back to the userspace. We require all fields of input __sk_buff except the ones we explicitly support to be set to zero. The expectation is that in the future we might add support for more fields and we want to fail explicitly if the user runs the program on the kernel where we don't yet support them. The API is intentionally vague (i.e. we don't explicitly add __sk_buff to bpf_attr, but ctx_in) to potentially let other test_run types use this interface in the future (this can be xdp_md for xdp types for example). v4: * don't copy more than allowed in bpf_ctx_init [Martin] v3: * handle case where ctx_in is NULL, but ctx_out is not [Martin] * convert size==0 checks to ptr==NULL checks and add some extra ptr checks [Martin] v2: * Addressed comments from Martin Lau Signed-off-by: Stanislav Fomichev Acked-by: Martin KaFai Lau Signed-off-by: Daniel Borkmann

bpf: allow for key-less BTF in array map

2019-04-10T00:05:46Z

Given we'll be reusing BPF array maps for global data/bss/rodata sections, we need a way to associate BTF DataSec type as its map value type. In usual cases we have this ugly BPF_ANNOTATE_KV_PAIR() macro hack e.g. via 38d5d3b3d5db ("bpf: Introduce BPF_ANNOTATE_KV_PAIR") to get initial map to type association going. While more use cases for it are discouraged, this also won't work for global data since the use of array map is a BPF loader detail and therefore unknown at compilation time. For array maps with just a single entry we make an exception in terms of BTF in that key type is declared optional if value type is of DataSec type. The latter LLVM is guaranteed to emit and it also aligns with how we regard global data maps as just a plain buffer area reusing existing map facilities for allowing things like introspection with existing tools. Signed-off-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov