user/sven/linux.git/kernel/bpf/task_iter.c, branch v6.7.9

bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg

2023-11-07T23:24:25Z

BTF_TYPE_SAFE_TRUSTED(struct bpf_iter__task) in verifier.c wanted to teach BPF verifier that bpf_iter__task -> task is a trusted ptr. But it doesn't work well. The reason is, bpf_iter__task -> task would go through btf_ctx_access() which enforces the reg_type of 'task' is ctx_arg_info->reg_type, and in task_iter.c, we actually explicitly declare that the ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL. Actually we have a previous case like this[1] where PTR_TRUSTED is added to the arg flag for map_iter. This patch sets ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL | PTR_TRUSTED in task_reg_info. Similarly, bpf_cgroup_reg_info -> cgroup is also PTR_TRUSTED since we are under the protection of cgroup_mutex and we would check cgroup_is_dead() in __cgroup_iter_seq_show(). This patch is to improve the user experience of the newly introduced bpf_iter_css_task kfunc before hitting the mainline. The Fixes tag is pointing to the commit introduced the bpf_iter_css_task kfunc. Link[1]:https://lore.kernel.org/all/20230706133932.45883-3-aspsk@isovalent.com/ Fixes: 9c66dc94b62a ("bpf: Introduce css_task open-coded iterator kfuncs") Signed-off-by: Chuyi Zhou Acked-by: Yonghong Song Link: https://lore.kernel.org/r/20231107132204.912120-2-zhouchuyi@bytedance.com Signed-off-by: Martin KaFai Lau

bpf: Add __bpf_kfunc_{start,end}_defs macros

2023-11-02T05:33:53Z

BPF kfuncs are meant to be called from BPF programs. Accordingly, most kfuncs are not called from anywhere in the kernel, which the -Wmissing-prototypes warning is unhappy about. We've peppered __diag_ignore_all("-Wmissing-prototypes", ... everywhere kfuncs are defined in the codebase to suppress this warning. This patch adds two macros meant to bound one or many kfunc definitions. All existing kfunc definitions which use these __diag calls to suppress -Wmissing-prototypes are migrated to use the newly-introduced macros. A new __diag_ignore_all - for "-Wmissing-declarations" - is added to the __bpf_kfunc_start_defs macro based on feedback from Andrii on an earlier version of this patch [0] and another recent mailing list thread [1]. In the future we might need to ignore different warnings or do other kfunc-specific things. This change will make it easier to make such modifications for all kfunc defs. [0]: https://lore.kernel.org/bpf/CAEf4BzaE5dRWtK6RPLnjTW-MW9sx9K3Fn6uwqCTChK2Dcb1Xig@mail.gmail.com/ [1]: https://lore.kernel.org/bpf/ZT+2qCc%2FaXep0%2FLf@krava/ Signed-off-by: Dave Marchevsky Suggested-by: Andrii Nakryiko Acked-by: Andrii Nakryiko Cc: Jiri Olsa Acked-by: Jiri Olsa Acked-by: David Vernet Acked-by: Yafang Shao Link: https://lore.kernel.org/r/20231031215625.2343848-1-davemarchevsky@fb.com Signed-off-by: Alexei Starovoitov

bpf: fix compilation error without CGROUPS

2023-11-02T05:28:25Z

Our MPTCP CI complained [1] -- and KBuild too -- that it was no longer possible to build the kernel without CONFIG_CGROUPS: kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_new': kernel/bpf/task_iter.c:919:14: error: 'CSS_TASK_ITER_PROCS' undeclared (first use in this function) 919 | case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED: | ^~~~~~~~~~~~~~~~~~~ kernel/bpf/task_iter.c:919:14: note: each undeclared identifier is reported only once for each function it appears in kernel/bpf/task_iter.c:919:36: error: 'CSS_TASK_ITER_THREADED' undeclared (first use in this function) 919 | case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED: | ^~~~~~~~~~~~~~~~~~~~~~ kernel/bpf/task_iter.c:927:60: error: invalid application of 'sizeof' to incomplete type 'struct css_task_iter' 927 | kit->css_it = bpf_mem_alloc(&bpf_global_ma, sizeof(struct css_task_iter)); | ^~~~~~ kernel/bpf/task_iter.c:930:9: error: implicit declaration of function 'css_task_iter_start'; did you mean 'task_seq_start'? [-Werror=implicit-function-declaration] 930 | css_task_iter_start(css, flags, kit->css_it); | ^~~~~~~~~~~~~~~~~~~ | task_seq_start kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_next': kernel/bpf/task_iter.c:940:16: error: implicit declaration of function 'css_task_iter_next'; did you mean 'class_dev_iter_next'? [-Werror=implicit-function-declaration] 940 | return css_task_iter_next(kit->css_it); | ^~~~~~~~~~~~~~~~~~ | class_dev_iter_next kernel/bpf/task_iter.c:940:16: error: returning 'int' from a function with return type 'struct task_struct *' makes pointer from integer without a cast [-Werror=int-conversion] 940 | return css_task_iter_next(kit->css_it); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_destroy': kernel/bpf/task_iter.c:949:9: error: implicit declaration of function 'css_task_iter_end' [-Werror=implicit-function-declaration] 949 | css_task_iter_end(kit->css_it); | ^~~~~~~~~~~~~~~~~ This patch simply surrounds with a #ifdef the new code requiring CGroups support. It seems enough for the compiler and this is similar to bpf_iter_css_{new,next,destroy}() functions where no other #ifdef have been added in kernel/bpf/helpers.c and in the selftests. Fixes: 9c66dc94b62a ("bpf: Introduce css_task open-coded iterator kfuncs") Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/6665206927 Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202310260528.aHWgVFqq-lkp@intel.com/ Signed-off-by: Matthieu Baerts [ added missing ifdefs for BTF_ID cgroup definitions ] Signed-off-by: Jiri Olsa Link: https://lore.kernel.org/r/20231101181601.1493271-1-jolsa@kernel.org Signed-off-by: Alexei Starovoitov

Merge tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2023-10-31T15:10:11Z

Pull networking updates from Jakub Kicinski: "Core & protocols: - Support usec resolution of TCP timestamps, enabled selectively by a route attribute. - Defer regular TCP ACK while processing socket backlog, try to send a cumulative ACK at the end. Increase single TCP flow performance on a 200Gbit NIC by 20% (100Gbit -> 120Gbit). - The Fair Queuing (FQ) packet scheduler: - add built-in 3 band prio / WRR scheduling - support bypass if the qdisc is mostly idle (5% speed up for TCP RR) - improve inactive flow reporting - optimize the layout of structures for better cache locality - Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern replacement for the old MD5 option. - Add more retransmission timeout (RTO) related statistics to TCP_INFO. - Support sending fragmented skbs over vsock sockets. - Make sure we send SIGPIPE for vsock sockets if socket was shutdown(). - Add sysctl for ignoring lower limit on lifetime in Router Advertisement PIO, based on an in-progress IETF draft. - Add sysctl to control activation of TCP ping-pong mode. - Add sysctl to make connection timeout in MPTCP configurable. - Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps limit the number of wakeups. - Support netlink GET for MDB (multicast forwarding), allowing user space to request a single MDB entry instead of dumping the entire table. - Support selective FDB flushing in the VXLAN tunnel driver. - Allow limiting learned FDB entries in bridges, prevent OOM attacks. - Allow controlling via configfs netconsole targets which were created via the kernel cmdline at boot, rather than via configfs at runtime. - Support multiple PTP timestamp event queue readers with different filters. - MCTP over I3C. BPF: - Add new veth-like netdevice where BPF program defines the logic of the xmit routine. It can operate in L3 and L2 mode. - Support exceptions - allow asserting conditions which should never be true but are hard for the verifier to infer. With some extra flexibility around handling of the exit / failure: https://lwn.net/Articles/938435/ - Add support for local per-cpu kptr, allow allocating and storing per-cpu objects in maps. Access to those objects operates on the value for the current CPU. This allows to deprecate local one-off implementations of per-CPU storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps. - Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is for systemd to re-implement the LogNamespace feature which allows running multiple instances of systemd-journald to process the logs of different services. - Enable open-coded task_vma iteration, after maple tree conversion made it hard to directly walk VMAs in tracing programs. - Add open-coded task, css_task and css iterator support. One of the use cases is customizable OOM victim selection via BPF. - Allow source address selection with bpf_*_fib_lookup(). - Add ability to pin BPF timer to the current CPU. - Prevent creation of infinite loops by combining tail calls and fentry/fexit programs. - Add missed stats for kprobes to retrieve the number of missed kprobe executions and subsequent executions of BPF programs. - Inherit system settings for CPU security mitigations. - Add BPF v4 CPU instruction support for arm32 and s390x. Changes to common code: - overflow: add DEFINE_FLEX() for on-stack definition of structs with flexible array members. - Process doc update with more guidance for reviewers. Driver API: - Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy mutex in most places and remove a lot of smaller locks. - Create a common DPLL configuration API. Allow configuring and querying state of PLL circuits used for clock syntonization, in network time distribution. - Unify fragmented and full page allocation APIs in page pool code. Let drivers be ignorant of PAGE_SIZE. - Rework PHY state machine to avoid races with calls to phy_stop(). - Notify DSA drivers of MAC address changes on user ports, improve correctness of offloads which depend on matching port MAC addresses. - Allow antenna control on injected WiFi frames. - Reduce the number of variants of napi_schedule(). - Simplify error handling when composing devlink health messages. Misc: - A lot of KCSAN data race "fixes", from Eric. - A lot of __counted_by() annotations, from Kees. - A lot of strncpy -> strscpy and printf format fixes. - Replace master/slave terminology with conduit/user in DSA drivers. - Handful of KUnit tests for netdev and WiFi core. Removed: - AppleTalk COPS. - AppleTalk ipddp. - TI AR7 CPMAC Ethernet driver. Drivers: - Ethernet high-speed NICs: - Intel (100G, ice, idpf): - add a driver for the Intel E2000 IPUs - make CRC/FCS stripping configurable - cross-timestamping for E823 devices - basic support for E830 devices - use aux-bus for managing client drivers - i40e: report firmware versions via devlink - nVidia/Mellanox: - support 4-port NICs - increase max number of channels to 256 - optimize / parallelize SF creation flow - Broadcom (bnxt): - enhance NIC temperature reporting - support PAM4 speeds and lane configuration - Marvell OcteonTX2: - PTP pulse-per-second output support - enable hardware timestamping for VFs - Solarflare/AMD: - conntrack NAT offload and offload for tunnels - Wangxun (ngbe/txgbe): - expose HW statistics - Pensando/AMD: - support PCI level reset - narrow down the condition under which skbs are linearized - Netronome/Corigine (nfp): - support CHACHA20-POLY1305 crypto in IPsec offload - Ethernet NICs embedded, slower, virtual: - Synopsys (stmmac): - add Loongson-1 SoC support - enable use of HW queues with no offload capabilities - enable PPS input support on all 5 channels - increase TX coalesce timer to 5ms - RealTek USB (r8152): improve efficiency of Rx by using GRO frags - xen: support SW packet timestamping - add drivers for implementations based on TI's PRUSS (AM64x EVM) - nVidia/Mellanox Ethernet datacenter switches: - avoid poor HW resource use on Spectrum-4 by better block selection for IPv6 multicast forwarding and ordering of blocks in ACL region - Ethernet embedded switches: - Microchip: - support configuring the drive strength for EMI compliance - ksz9477: partial ACL support - ksz9477: HSR offload - ksz9477: Wake on LAN - Realtek: - rtl8366rb: respect device tree config of the CPU port - Ethernet PHYs: - support Broadcom BCM5221 PHYs - TI dp83867: support hardware LED blinking - CAN: - add support for Linux-PHY based CAN transceivers - at91_can: clean up and use rx-offload helpers - WiFi: - MediaTek (mt76): - new sub-driver for mt7925 USB/PCIe devices - HW wireless <> Ethernet bridging in MT7988 chips - mt7603/mt7628 stability improvements - Qualcomm (ath12k): - WCN7850: - enable 320 MHz channels in 6 GHz band - hardware rfkill support - enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster - read board data variant name from SMBIOS - QCN9274: mesh support - RealTek (rtw89): - TDMA-based multi-channel concurrency (MCC) - Silicon Labs (wfx): - Remain-On-Channel (ROC) support - Bluetooth: - ISO: many improvements for broadcast support - mark BCM4378/BCM4387 as BROKEN_LE_CODED - add support for QCA2066 - btmtksdio: enable Bluetooth wakeup from suspend" * tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits) net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos() net: mana: Use xdp_set_features_flag instead of direct assignment vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size() iavf: delete the iavf client interface iavf: add a common function for undoing the interrupt scheme iavf: use unregister_netdev iavf: rely on netdev's own registered state iavf: fix the waiting time for initial reset iavf: in iavf_down, don't queue watchdog_task if comms failed iavf: simplify mutex_trylock+sleep loops iavf: fix comments about old bit locks doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name tools: ynl: introduce option to process unknown attributes or types ipvlan: properly track tx_errors netdevsim: Block until all devices are released nfp: using napi_build_skb() to replace build_skb() net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy" net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN net: dsa: microchip: Refactor switch shutdown routine for WoL preparation ...

bpf: Let bpf_iter_task_new accept null task ptr

2023-10-20T00:02:46Z

When using task_iter to iterate all threads of a specific task, we enforce that the user must pass a valid task pointer to ensure safety. However, when iterating all threads/process in the system, BPF verifier still require a valid ptr instead of "nullable" pointer, even though it's pointless, which is a kind of surprising from usability standpoint. It would be nice if we could let that kfunc accept a explicit null pointer when we are using BPF_TASK_ITER_ALL_{PROCS, THREADS} and a valid pointer when using BPF_TASK_ITER_THREAD. Given a trival kfunc: __bpf_kfunc void FN(struct TYPE_A *obj); BPF Prog would reject a nullptr for obj. The error info is: "arg#x pointer type xx xx must point to scalar, or struct with scalar" reported by get_kfunc_ptr_arg_type(). The reg->type is SCALAR_VALUE and the btf type of ref_t is not scalar or scalar_struct which leads to the rejection of get_kfunc_ptr_arg_type. This patch add "__nullable" annotation: __bpf_kfunc void FN(struct TYPE_A *obj__nullable); Here __nullable indicates obj can be optional, user can pass a explicit nullptr or a normal TYPE_A pointer. In get_kfunc_ptr_arg_type(), we will detect whether the current arg is optional and register is null, If so, return a new kfunc_ptr_arg_type KF_ARG_PTR_TO_NULL and skip to the next arg in check_kfunc_args(). Signed-off-by: Chuyi Zhou Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20231018061746.111364-7-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov

bpf: Introduce task open coded iterator kfuncs

2023-10-20T00:02:46Z

This patch adds kfuncs bpf_iter_task_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_task in open-coded iterator style. BPF programs can use these kfuncs or through bpf_for_each macro to iterate all processes in the system. The API design keep consistent with SEC("iter/task"). bpf_iter_task_new() accepts a specific task and iterating type which allows: 1. iterating all process in the system (BPF_TASK_ITER_ALL_PROCS) 2. iterating all threads in the system (BPF_TASK_ITER_ALL_THREADS) 3. iterating all threads of a specific task (BPF_TASK_ITER_PROC_THREADS) Signed-off-by: Chuyi Zhou Link: https://lore.kernel.org/r/20231018061746.111364-4-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov

bpf: Introduce css_task open-coded iterator kfuncs

2023-10-20T00:02:46Z

This patch adds kfuncs bpf_iter_css_task_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_css_task in open-coded iterator style. These kfuncs actually wrapps css_task_iter_{start,next, end}. BPF programs can use these kfuncs through bpf_for_each macro for iteration of all tasks under a css. css_task_iter_*() would try to get the global spin-lock *css_set_lock*, so the bpf side has to be careful in where it allows to use this iter. Currently we only allow it in bpf_lsm and bpf iter-s. Signed-off-by: Chuyi Zhou Acked-by: Tejun Heo Link: https://lore.kernel.org/r/20231018061746.111364-3-zhouchuyi@bytedance.com Signed-off-by: Alexei Starovoitov

file: convert to SLAB_TYPESAFE_BY_RCU

2023-10-19T09:02:48Z

In recent discussions around some performance improvements in the file handling area we discussed switching the file cache to rely on SLAB_TYPESAFE_BY_RCU which allows us to get rid of call_rcu() based freeing for files completely. This is a pretty sensitive change overall but it might actually be worth doing. The main downside is the subtlety. The other one is that we should really wait for Jann's patch to land that enables KASAN to handle SLAB_TYPESAFE_BY_RCU UAFs. Currently it doesn't but a patch for this exists. With SLAB_TYPESAFE_BY_RCU objects may be freed and reused multiple times which requires a few changes. So it isn't sufficient anymore to just acquire a reference to the file in question under rcu using atomic_long_inc_not_zero() since the file might have already been recycled and someone else might have bumped the reference. In other words, callers might see reference count bumps from newer users. For this reason it is necessary to verify that the pointer is the same before and after the reference count increment. This pattern can be seen in get_file_rcu() and __files_get_rcu(). In addition, it isn't possible to access or check fields in struct file without first aqcuiring a reference on it. Not doing that was always very dodgy and it was only usable for non-pointer data in struct file. With SLAB_TYPESAFE_BY_RCU it is necessary that callers first acquire a reference under rcu or they must hold the files_lock of the fdtable. Failing to do either one of this is a bug. Thanks to Jann for pointing out that we need to ensure memory ordering between reallocations and pointer check by ensuring that all subsequent loads have a dependency on the second load in get_file_rcu() and providing a fixup that was folded into this patch. Cc: Jann Horn Suggested-by: Linus Torvalds Signed-off-by: Christian Brauner

bpf: Introduce task_vma open-coded iterator kfuncs

2023-10-13T22:48:58Z

This patch adds kfuncs bpf_iter_task_vma_{new,next,destroy} which allow creation and manipulation of struct bpf_iter_task_vma in open-coded iterator style. BPF programs can use these kfuncs directly or through bpf_for_each macro for natural-looking iteration of all task vmas. The implementation borrows heavily from bpf_find_vma helper's locking - differing only in that it holds the mmap_read lock for all iterations while the helper only executes its provided callback on a maximum of 1 vma. Aside from locking, struct vma_iterator and vma_next do all the heavy lifting. A pointer to an inner data struct, struct bpf_iter_task_vma_data, is the only field in struct bpf_iter_task_vma. This is because the inner data struct contains a struct vma_iterator (not ptr), whose size is likely to change under us. If bpf_iter_task_vma_kern contained vma_iterator directly such a change would require change in opaque bpf_iter_task_vma struct's size. So better to allocate vma_iterator using BPF allocator, and since that alloc must already succeed, might as well allocate all iter fields, thereby freezing struct bpf_iter_task_vma size. Signed-off-by: Dave Marchevsky Signed-off-by: Andrii Nakryiko Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20231013204426.1074286-4-davemarchevsky@fb.com

bpf: task_group_seq_get_next: simplify the "next tid" logic

2023-09-08T15:42:19Z

Kill saved_tid. It looks ugly to update *tid and then restore the previous value if __task_pid_nr_ns() returns 0. Change this code to update *tid and common->pid_visiting once before return. Signed-off-by: Oleg Nesterov Acked-by: Yonghong Song Link: https://lore.kernel.org/r/20230905154656.GA24950@redhat.com Signed-off-by: Alexei Starovoitov