user/sven/linux.git/kernel/bpf, branch v6.9.2

bpf: verifier: prevent userspace memory access

2024-04-26T16:45:18Z

With BPF_PROBE_MEM, BPF allows de-referencing an untrusted pointer. To thwart invalid memory accesses, the JITs add an exception table entry for all such accesses. But in case the src_reg + offset is a userspace address, the BPF program might read that memory if the user has mapped it. Make the verifier add guard instructions around such memory accesses and skip the load if the address falls into the userspace region. The JITs need to implement bpf_arch_uaddress_limit() to define where the userspace addresses end for that architecture or TASK_SIZE is taken as default. The implementation is as follows: REG_AX = SRC_REG if(offset) REG_AX += offset; REG_AX >>= 32; if (REG_AX <= (uaddress_limit >> 32)) DST_REG = 0; else DST_REG = *(size *)(SRC_REG + offset); Comparing just the upper 32 bits of the load address with the upper 32 bits of uaddress_limit implies that the values are being aligned down to a 4GB boundary before comparison. The above means that all loads with address <= uaddress_limit + 4GB are skipped. This is acceptable because there is a large hole (much larger than 4GB) between userspace and kernel space memory, therefore a correctly functioning BPF program should not access this 4GB memory above the userspace. Let's analyze what this patch does to the following fentry program dereferencing an untrusted pointer: SEC("fentry/tcp_v4_connect") int BPF_PROG(fentry_tcp_v4_connect, struct sock *sk) { *(volatile long *)sk; return 0; } BPF Program before | BPF Program after ------------------ | ----------------- 0: (79) r1 = *(u64 *)(r1 +0) 0: (79) r1 = *(u64 *)(r1 +0) ----------------------------------------------------------------------- 1: (79) r1 = *(u64 *)(r1 +0) --\ 1: (bf) r11 = r1 ----------------------------\ \ 2: (77) r11 >>= 32 2: (b7) r0 = 0 \ \ 3: (b5) if r11 <= 0x8000 goto pc+2 3: (95) exit \ \-> 4: (79) r1 = *(u64 *)(r1 +0) \ 5: (05) goto pc+1 \ 6: (b7) r1 = 0 \-------------------------------------- 7: (b7) r0 = 0 8: (95) exit As you can see from above, in the best case (off=0), 5 extra instructions are emitted. Now, we analyze the same program after it has gone through the JITs of ARM64 and RISC-V architectures. We follow the single load instruction that has the untrusted pointer and see what instrumentation has been added around it. x86-64 JIT ========== JIT's Instrumentation (upstream) --------------------- 0: nopl 0x0(%rax,%rax,1) 5: xchg %ax,%ax 7: push %rbp 8: mov %rsp,%rbp b: mov 0x0(%rdi),%rdi --------------------------------- f: movabs $0x800000000000,%r11 19: cmp %r11,%rdi 1c: jb 0x000000000000002a 1e: mov %rdi,%r11 21: add $0x0,%r11 28: jae 0x000000000000002e 2a: xor %edi,%edi 2c: jmp 0x0000000000000032 2e: mov 0x0(%rdi),%rdi --------------------------------- 32: xor %eax,%eax 34: leave 35: ret The x86-64 JIT already emits some instructions to protect against user memory access. This patch doesn't make any changes for the x86-64 JIT. ARM64 JIT ========= No Intrumentation Verifier's Instrumentation (upstream) (This patch) ----------------- -------------------------- 0: add x9, x30, #0x0 0: add x9, x30, #0x0 4: nop 4: nop 8: paciasp 8: paciasp c: stp x29, x30, [sp, #-16]! c: stp x29, x30, [sp, #-16]! 10: mov x29, sp 10: mov x29, sp 14: stp x19, x20, [sp, #-16]! 14: stp x19, x20, [sp, #-16]! 18: stp x21, x22, [sp, #-16]! 18: stp x21, x22, [sp, #-16]! 1c: stp x25, x26, [sp, #-16]! 1c: stp x25, x26, [sp, #-16]! 20: stp x27, x28, [sp, #-16]! 20: stp x27, x28, [sp, #-16]! 24: mov x25, sp 24: mov x25, sp 28: mov x26, #0x0 28: mov x26, #0x0 2c: sub x27, x25, #0x0 2c: sub x27, x25, #0x0 30: sub sp, sp, #0x0 30: sub sp, sp, #0x0 34: ldr x0, [x0] 34: ldr x0, [x0] -------------------------------------------------------------------------------- 38: ldr x0, [x0] ----------\ 38: add x9, x0, #0x0 -----------------------------------\\ 3c: lsr x9, x9, #32 3c: mov x7, #0x0 \\ 40: cmp x9, #0x10, lsl #12 40: mov sp, sp \\ 44: b.ls 0x0000000000000050 44: ldp x27, x28, [sp], #16 \\--> 48: ldr x0, [x0] 48: ldp x25, x26, [sp], #16 \ 4c: b 0x0000000000000054 4c: ldp x21, x22, [sp], #16 \ 50: mov x0, #0x0 50: ldp x19, x20, [sp], #16 \--------------------------------------- 54: ldp x29, x30, [sp], #16 54: mov x7, #0x0 58: add x0, x7, #0x0 58: mov sp, sp 5c: autiasp 5c: ldp x27, x28, [sp], #16 60: ret 60: ldp x25, x26, [sp], #16 64: nop 64: ldp x21, x22, [sp], #16 68: ldr x10, 0x0000000000000070 68: ldp x19, x20, [sp], #16 6c: br x10 6c: ldp x29, x30, [sp], #16 70: add x0, x7, #0x0 74: autiasp 78: ret 7c: nop 80: ldr x10, 0x0000000000000088 84: br x10 There are 6 extra instructions added in ARM64 in the best case. This will become 7 in the worst case (off != 0). RISC-V JIT (RISCV_ISA_C Disabled) ========== No Intrumentation Verifier's Instrumentation (upstream) (This patch) ----------------- -------------------------- 0: nop 0: nop 4: nop 4: nop 8: li a6, 33 8: li a6, 33 c: addi sp, sp, -16 c: addi sp, sp, -16 10: sd s0, 8(sp) 10: sd s0, 8(sp) 14: addi s0, sp, 16 14: addi s0, sp, 16 18: ld a0, 0(a0) 18: ld a0, 0(a0) --------------------------------------------------------------- 1c: ld a0, 0(a0) --\ 1c: mv t0, a0 --------------------------\ \ 20: srli t0, t0, 32 20: li a5, 0 \ \ 24: lui t1, 4096 24: ld s0, 8(sp) \ \ 28: sext.w t1, t1 28: addi sp, sp, 16 \ \ 2c: bgeu t1, t0, 12 2c: sext.w a0, a5 \ \--> 30: ld a0, 0(a0) 30: ret \ 34: j 8 \ 38: li a0, 0 \------------------------------ 3c: li a5, 0 40: ld s0, 8(sp) 44: addi sp, sp, 16 48: sext.w a0, a5 4c: ret There are 7 extra instructions added in RISC-V. Fixes: 800834285361 ("bpf, arm64: Add BPF exception tables") Reported-by: Breno Leitao Suggested-by: Alexei Starovoitov Acked-by: Ilya Leoshkevich Signed-off-by: Puranjay Mohan Link: https://lore.kernel.org/r/20240424100210.11982-2-puranjay@kernel.org Signed-off-by: Alexei Starovoitov

bpf: Fix a verifier verbose message

2024-04-12T16:37:20Z

Long ago a map file descriptor in a pseudo ldimm64 instruction could only be present as an immediate value insn[0].imm, and thus this value was used in a verbose verifier message printed when the file descriptor wasn't valid. Since addition of BPF_PSEUDO_MAP_IDX_VALUE/BPF_PSEUDO_MAP_IDX the insn[0].imm field can also contain an index pointing to the file descriptor in the attr.fd_array array. However, if the file descriptor is invalid, the verifier still prints the verbose message containing value of insn[0].imm. Patch the verifier message to always print the actual file descriptor value. Fixes: 387544bfa291 ("bpf: Introduce fd_idx") Signed-off-by: Anton Protopopov Signed-off-by: Daniel Borkmann Acked-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20240412141100.3562942-1-aspsk@isovalent.com

Merge tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2024-04-04T21:49:10Z

Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, bluetooth and bpf. Fairly usual collection of driver and core fixes. The large selftest accompanying one of the fixes is also becoming a common occurrence. Current release - regressions: - ipv6: fix infinite recursion in fib6_dump_done() - net/rds: fix possible null-deref in newly added error path Current release - new code bugs: - net: do not consume a full cacheline for system_page_pool - bpf: fix bpf_arena-related file descriptor leaks in the verifier - drv: ice: fix freeing uninitialized pointers, fixing misuse of the newfangled __free() auto-cleanup Previous releases - regressions: - x86/bpf: fixes the BPF JIT with retbleed=stuff - xen-netfront: add missing skb_mark_for_recycle, fix page pool accounting leaks, revealed by recently added explicit warning - tcp: fix bind() regression for v6-only wildcard and v4-mapped-v6 non-wildcard addresses - Bluetooth: - replace "hci_qca: Set BDA quirk bit if fwnode exists in DT" with better workarounds to un-break some buggy Qualcomm devices - set conn encrypted before conn establishes, fix re-connecting to some headsets which use slightly unusual sequence of msgs - mptcp: - prevent BPF accessing lowat from a subflow socket - don't account accept() of non-MPC client as fallback to TCP - drv: mana: fix Rx DMA datasize and skb_over_panic - drv: i40e: fix VF MAC filter removal Previous releases - always broken: - gro: various fixes related to UDP tunnels - netns crossing problems, incorrect checksum conversions, and incorrect packet transformations which may lead to panics - bpf: support deferring bpf_link dealloc to after RCU grace period - nf_tables: - release batch on table validation from abort path - release mutex after nft_gc_seq_end from abort path - flush pending destroy work before exit_net release - drv: r8169: skip DASH fw status checks when DASH is disabled" * tag 'net-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits) netfilter: validate user input for expected length net/sched: act_skbmod: prevent kernel-infoleak net: usb: ax88179_178a: avoid the interface always configured as random address net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45() net: ravb: Always update error counters net: ravb: Always process TX descriptor ring netfilter: nf_tables: discard table flag update with pending basechain deletion netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get() netfilter: nf_tables: reject new basechain after table flag update netfilter: nf_tables: flush pending destroy work before exit_net release netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path netfilter: nf_tables: release batch on table validation from abort path Revert "tg3: Remove residual error handling in tg3_suspend" tg3: Remove residual error handling in tg3_suspend net: mana: Fix Rx DMA datasize and skb_over_panic net/sched: fix lockdep splat in qdisc_tree_reduce_backlog() net: phy: micrel: lan8814: Fix when enabling/disabling 1-step timestamping net: stmmac: fix rx queue priority assignment net: txgbe: fix i2c dev name cannot match clkdev net: fec: Set mac_managed_pm during probe ...

Merge tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2024-03-31T18:23:51Z

Pull Kbuild fixes from Masahiro Yamada: - Deduplicate Kconfig entries for CONFIG_CXL_PMU - Fix unselectable choice entry in MIPS Kconfig, and forbid this structure - Remove unused include/asm-generic/export.h - Fix a NULL pointer dereference bug in modpost - Enable -Woverride-init warning consistently with W=1 - Drop KCSAN flags from *.mod.c files * tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: Fix typo HEIGTH to HEIGHT Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries kbuild: make -Woverride-init warnings more consistent modpost: do not make find_tosym() return NULL export.h: remove include/asm-generic/export.h kconfig: do not reparent the menu inside a choice block MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig

kbuild: make -Woverride-init warnings more consistent

2024-03-31T02:32:26Z

The -Woverride-init warn about code that may be intentional or not, but the inintentional ones tend to be real bugs, so there is a bit of disagreement on whether this warning option should be enabled by default and we have multiple settings in scripts/Makefile.extrawarn as well as individual subsystems. Older versions of clang only supported -Wno-initializer-overrides with the same meaning as gcc's -Woverride-init, though all supported versions now work with both. Because of this difference, an earlier cleanup of mine accidentally turned the clang warning off for W=1 builds and only left it on for W=2, while it's still enabled for gcc with W=1. There is also one driver that only turns the warning off for newer versions of gcc but not other compilers, and some but not all the Makefiles still use a cc-disable-warning conditional that is no longer needed with supported compilers here. Address all of the above by removing the special cases for clang and always turning the warning off unconditionally where it got in the way, using the syntax that is supported by both compilers. Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options") Signed-off-by: Arnd Bergmann Acked-by: Hamza Mahfooz Acked-by: Jani Nikula Acked-by: Andrew Jeffery Signed-off-by: Jani Nikula Reviewed-by: Linus Walleij Signed-off-by: Masahiro Yamada

bpf: fix possible file descriptor leaks in verifier

2024-03-29T16:19:55Z

The resolve_pseudo_ldimm64() function might have leaked file descriptors when BPF_MAP_TYPE_ARENA was used in a program (some error paths missed a corresponding fdput). Add missing fdputs. v2: remove unrelated changes from the fix Fixes: 6082b6c328b5 ("bpf: Recognize addr_space_cast instruction in the verifier.") Signed-off-by: Anton Protopopov Acked-by: Yonghong Song Acked-by: Shung-Hsi Yu Link: https://lore.kernel.org/r/20240329071106.67968-1-aspsk@isovalent.com Signed-off-by: Alexei Starovoitov

bpf: support deferring bpf_link dealloc to after RCU grace period

2024-03-29T01:47:45Z

BPF link for some program types is passed as a "context" which can be used by those BPF programs to look up additional information. E.g., for multi-kprobes and multi-uprobes, link is used to fetch BPF cookie values. Because of this runtime dependency, when bpf_link refcnt drops to zero there could still be active BPF programs running accessing link data. This patch adds generic support to defer bpf_link dealloc callback to after RCU GP, if requested. This is done by exposing two different deallocation callbacks, one synchronous and one deferred. If deferred one is provided, bpf_link_free() will schedule dealloc_deferred() callback to happen after RCU GP. BPF is using two flavors of RCU: "classic" non-sleepable one and RCU tasks trace one. The latter is used when sleepable BPF programs are used. bpf_link_free() accommodates that by checking underlying BPF program's sleepable flag, and goes either through normal RCU GP only for non-sleepable, or through RCU tasks trace GP *and* then normal RCU GP (taking into account rcu_trace_implies_rcu_gp() optimization), if BPF program is sleepable. We use this for multi-kprobe and multi-uprobe links, which dereference link during program run. We also preventively switch raw_tp link to use deferred dealloc callback, as upcoming changes in bpf-next tree expose raw_tp link data (specifically, cookie value) to BPF program at runtime as well. Fixes: 0dcac2725406 ("bpf: Add multi kprobe link") Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link") Reported-by: syzbot+981935d9485a560bfbcb@syzkaller.appspotmail.com Reported-by: syzbot+2cb5a6c573e98db598cc@syzkaller.appspotmail.com Reported-by: syzbot+62d8b26793e8a2bd0516@syzkaller.appspotmail.com Signed-off-by: Andrii Nakryiko Acked-by: Jiri Olsa Link: https://lore.kernel.org/r/20240328052426.3042617-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov

bpf: Protect against int overflow for stack access size

2024-03-27T16:56:36Z

This patch re-introduces protection against the size of access to stack memory being negative; the access size can appear negative as a result of overflowing its signed int representation. This should not actually happen, as there are other protections along the way, but we should protect against it anyway. One code path was missing such protections (fixed in the previous patch in the series), causing out-of-bounds array accesses in check_stack_range_initialized(). This patch causes the verification of a program with such a non-sensical access size to fail. This check used to exist in a more indirect way, but was inadvertendly removed in a833a17aeac7. Fixes: a833a17aeac7 ("bpf: Fix verification of indirect var-off stack access") Reported-by: syzbot+33f4297b5f927648741a@syzkaller.appspotmail.com Reported-by: syzbot+aafd0513053a1cbf52ef@syzkaller.appspotmail.com Closes: https://lore.kernel.org/bpf/CAADnVQLORV5PT0iTAhRER+iLBTkByCYNBYyvBSgjN1T31K+gOw@mail.gmail.com/ Acked-by: Andrii Nakryiko Signed-off-by: Andrei Matei Link: https://lore.kernel.org/r/20240327024245.318299-3-andreimatei1@gmail.com Signed-off-by: Alexei Starovoitov

bpf: Check bloom filter map value size

2024-03-27T16:56:17Z

This patch adds a missing check to bloom filter creating, rejecting values above KMALLOC_MAX_SIZE. This brings the bloom map in line with many other map types. The lack of this protection can cause kernel crashes for value sizes that overflow int's. Such a crash was caught by syzkaller. The next patch adds more guard-rails at a lower level. Signed-off-by: Andrei Matei Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20240327024245.318299-2-andreimatei1@gmail.com Signed-off-by: Alexei Starovoitov

bpf: fix warning for crash_kexec

2024-03-27T15:52:24Z

With [1], crash dump specific code is moved out of CONFIG_KEXEC_CORE and placed under CONFIG_CRASH_DUMP, where it is more appropriate. And since CONFIG_KEXEC & !CONFIG_CRASH_DUMP build option is supported with that, it led to the below warning: "WARN: resolve_btfids: unresolved symbol crash_kexec" Fix it by using the appropriate #ifdef. [1] https://lore.kernel.org/all/20240124051254.67105-1-bhe@redhat.com/ Acked-by: Baoquan He Fixes: 02aff8480533 ("crash: split crash dumping code out from kexec_core.c") Acked-by: Jiri Olsa Acked-by: Stanislav Fomichev Signed-off-by: Hari Bathini Link: https://lore.kernel.org/r/20240319080152.36987-1-hbathini@linux.ibm.com Signed-off-by: Alexei Starovoitov