user/sven/linux.git/kernel/cgroup, branch v4.14.299

cgroup: Use separate src/dst nodes when preloading css_sets for migration

2022-07-21T18:42:43Z

commit 07fd5b6cdf3cc30bfde8fe0f644771688be04447 upstream. Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other. Signed-off-by: Tejun Heo Reported-by: Mukesh Ojha Reported-by: shisiyuan Link: http://lkml.kernel.org/r/1654187688-27411-1-git-send-email-shisiyuan@xiaomi.com Link: https://www.spinics.net/lists/cgroups/msg33313.html Fixes: f817de98513d ("cgroup: prepare migration path for unified hierarchy") Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Greg Kroah-Hartman

cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()

2022-05-18T07:18:08Z

commit 2685027fca387b602ae565bff17895188b803988 upstream. There are 3 places where the cpu and node masks of the top cpuset can be initialized in the order they are executed: 1) start_kernel -> cpuset_init() 2) start_kernel -> cgroup_init() -> cpuset_bind() 3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp() The first cpuset_init() call just sets all the bits in the masks. The second cpuset_bind() call sets cpus_allowed and mems_allowed to the default v2 values. The third cpuset_init_smp() call sets them back to v1 values. For systems with cgroup v2 setup, cpuset_bind() is called once. As a result, cpu and memory node hot add may fail to update the cpu and node masks of the top cpuset to include the newly added cpu or node in a cgroup v2 environment. For systems with cgroup v1 setup, cpuset_bind() is called again by rebind_subsystem() when the v1 cpuset filesystem is mounted as shown in the dmesg log below with an instrumented kernel. [ 2.609781] cpuset_bind() called - v2 = 1 [ 3.079473] cpuset_init_smp() called [ 7.103710] cpuset_bind() called - v2 = 0 smp_init() is called after the first two init functions. So we don't have a complete list of active cpus and memory nodes until later in cpuset_init_smp() which is the right time to set up effective_cpus and effective_mems. To fix this cgroup v2 mask setup problem, the potentially incorrect cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed. For cgroup v2 systems, the initial cpuset_bind() call will set the masks correctly. For cgroup v1 systems, the second call to cpuset_bind() will do the right setup. cc: stable@vger.kernel.org Signed-off-by: Waiman Long Tested-by: Feng Tang Reviewed-by: Michal Koutný Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

cgroup: Use open-time cgroup namespace for process migration perm checks

2022-04-20T07:08:30Z

commit e57457641613fef0d147ede8bd6a3047df588b95 upstream. cgroup process migration permission checks are performed at write time as whether a given operation is allowed or not is dependent on the content of the write - the PID. This currently uses current's cgroup namespace which is a potential security weakness as it may allow scenarios where a less privileged process tricks a more privileged one into writing into a fd that it created. This patch makes cgroup remember the cgroup namespace at the time of open and uses it for migration permission checks instad of current's. Note that this only applies to cgroup2 as cgroup1 doesn't have namespace support. This also fixes a use-after-free bug on cgroupns reported in https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com Note that backporting this fix also requires the preceding patch. Reported-by: "Eric W. Biederman" Suggested-by: Linus Torvalds Cc: Michal Koutný Cc: Oleg Nesterov Reviewed-by: Michal Koutný Reported-by: syzbot+50f5cf33a284ce738b62@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/00000000000048c15c05d0083397@google.com Fixes: 5136f6365ce3 ("cgroup: implement "nsdelegate" mount option") Signed-off-by: Tejun Heo [mkoutny: v5.10: duplicate ns check in procs/threads write handler, adjust context] Signed-off-by: Michal Koutný Signed-off-by: Greg Kroah-Hartman [OP: backport to v4.14: drop changes to cgroup_attach_permissions() and cgroup_css_set_fork(), adjust cgroup_procs_write_permission() calls] Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman

cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv

2022-04-20T07:08:30Z

commit 0d2b5955b36250a9428c832664f2079cbf723bec upstream. of->priv is currently used by each interface file implementation to store private information. This patch collects the current two private data usages into struct cgroup_file_ctx which is allocated and freed by the common path. This allows generic private data which applies to multiple files, which will be used to in the following patch. Note that cgroup_procs iterator is now embedded as procs.iter in the new cgroup_file_ctx so that it doesn't need to be allocated and freed separately. v2: union dropped from cgroup_file_ctx and the procs iterator is embedded in cgroup_file_ctx as suggested by Linus. v3: Michal pointed out that cgroup1's procs pidlist uses of->priv too. Converted. Didn't change to embedded allocation as cgroup1 pidlists get stored for caching. Signed-off-by: Tejun Heo Cc: Linus Torvalds Reviewed-by: Michal Koutný [mkoutny: v5.10: modify cgroup.pressure handlers, adjust context] Signed-off-by: Michal Koutný Signed-off-by: Greg Kroah-Hartman [OP: backport to v4.14: drop changes to cgroup_pressure_*() functions] Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman

cgroup: Use open-time credentials for process migraton perm checks

2022-04-20T07:08:30Z

commit 1756d7994ad85c2479af6ae5a9750b92324685af upstream. cgroup process migration permission checks are performed at write time as whether a given operation is allowed or not is dependent on the content of the write - the PID. This currently uses current's credentials which is a potential security weakness as it may allow scenarios where a less privileged process tricks a more privileged one into writing into a fd that it created. This patch makes both cgroup2 and cgroup1 process migration interfaces to use the credentials saved at the time of open (file->f_cred) instead of current's. Reported-by: "Eric W. Biederman" Suggested-by: Linus Torvalds Fixes: 187fe84067bd ("cgroup: require write perm on common ancestor when moving processes on the default hierarchy") Reviewed-by: Michal Koutný Signed-off-by: Tejun Heo [OP: backport to v4.14: apply original __cgroup_procs_write() changes to cgroup_threads_write() and cgroup_procs_write()] Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman

cgroup/cpuset: Fix a race between cpuset_attach() and cpu hotplug

2022-03-02T10:33:52Z

commit 05c7b7a92cc87ff8d7fde189d0fade250697573c upstream. As previously discussed(https://lkml.org/lkml/2022/1/20/51), cpuset_attach() is affected with similar cpu hotplug race, as follow scenario: cpuset_attach() cpu hotplug --------------------------- ---------------------- down_write(cpuset_rwsem) guarantee_online_cpus() // (load cpus_attach) sched_cpu_deactivate set_cpu_active() // will change cpu_active_mask set_cpus_allowed_ptr(cpus_attach) __set_cpus_allowed_ptr_locked() // (if the intersection of cpus_attach and cpu_active_mask is empty, will return -EINVAL) up_write(cpuset_rwsem) To avoid races such as described above, protect cpuset_attach() call with cpu_hotplug_lock. Fixes: be367d099270 ("cgroups: let ss->can_attach and ss->attach do whole threadgroups at a time") Cc: stable@vger.kernel.org # v2.6.32+ Reported-by: Zhao Gongyi Signed-off-by: Zhang Qiao Acked-by: Waiman Long Reviewed-by: Michal Koutný Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

cgroup-v1: Require capabilities to set release_agent

2022-02-11T07:43:35Z

commit 24f6008564183aa120d07c03d9289519c2fe02af upstream. The cgroup release_agent is called with call_usermodehelper. The function call_usermodehelper starts the release_agent with a full set fo capabilities. Therefore require capabilities when setting the release_agaent. Reported-by: Tabitha Sable Tested-by: Tabitha Sable Fixes: 81a6a5cdd2c5 ("Task Control Groups: automatic userspace notification of idle cgroups") Cc: stable@vger.kernel.org # v2.6.24+ Signed-off-by: "Eric W. Biederman" Signed-off-by: Tejun Heo [mkoutny: Adjust for pre-fs_context, duplicate mount/remount check, drop log messages.] Acked-by: Michal Koutný Signed-off-by: Greg Kroah-Hartman

cgroup: Make rebind_subsystems() disable v2 controllers all at once

2021-11-26T10:40:29Z

[ Upstream commit 7ee285395b211cad474b2b989db52666e0430daf ] It was found that the following warning was displayed when remounting controllers from cgroup v2 to v1: [ 8042.997778] WARNING: CPU: 88 PID: 80682 at kernel/cgroup/cgroup.c:3130 cgroup_apply_control_disable+0x158/0x190 : [ 8043.091109] RIP: 0010:cgroup_apply_control_disable+0x158/0x190 [ 8043.096946] Code: ff f6 45 54 01 74 39 48 8d 7d 10 48 c7 c6 e0 46 5a a4 e8 7b 67 33 00 e9 41 ff ff ff 49 8b 84 24 e8 01 00 00 0f b7 40 08 eb 95 <0f> 0b e9 5f ff ff ff 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3 [ 8043.115692] RSP: 0018:ffffba8a47c23d28 EFLAGS: 00010202 [ 8043.120916] RAX: 0000000000000036 RBX: ffffffffa624ce40 RCX: 000000000000181a [ 8043.128047] RDX: ffffffffa63c43e0 RSI: ffffffffa63c43e0 RDI: ffff9d7284ee1000 [ 8043.135180] RBP: ffff9d72874c5800 R08: ffffffffa624b090 R09: 0000000000000004 [ 8043.142314] R10: ffffffffa624b080 R11: 0000000000002000 R12: ffff9d7284ee1000 [ 8043.149447] R13: ffff9d7284ee1000 R14: ffffffffa624ce70 R15: ffffffffa6269e20 [ 8043.156576] FS: 00007f7747cff740(0000) GS:ffff9d7a5fc00000(0000) knlGS:0000000000000000 [ 8043.164663] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8043.170409] CR2: 00007f7747e96680 CR3: 0000000887d60001 CR4: 00000000007706e0 [ 8043.177539] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8043.184673] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8043.191804] PKRU: 55555554 [ 8043.194517] Call Trace: [ 8043.196970] rebind_subsystems+0x18c/0x470 [ 8043.201070] cgroup_setup_root+0x16c/0x2f0 [ 8043.205177] cgroup1_root_to_use+0x204/0x2a0 [ 8043.209456] cgroup1_get_tree+0x3e/0x120 [ 8043.213384] vfs_get_tree+0x22/0xb0 [ 8043.216883] do_new_mount+0x176/0x2d0 [ 8043.220550] __x64_sys_mount+0x103/0x140 [ 8043.224474] do_syscall_64+0x38/0x90 [ 8043.228063] entry_SYSCALL_64_after_hwframe+0x44/0xae It was caused by the fact that rebind_subsystem() disables controllers to be rebound one by one. If more than one disabled controllers are originally from the default hierarchy, it means that cgroup_apply_control_disable() will be called multiple times for the same default hierarchy. A controller may be killed by css_kill() in the first round. In the second round, the killed controller may not be completely dead yet leading to the warning. To avoid this problem, we collect all the ssid's of controllers that needed to be disabled from the default hierarchy and then disable them in one go instead of one by one. Fixes: 334c3679ec4b ("cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends") Signed-off-by: Waiman Long Signed-off-by: Tejun Heo Signed-off-by: Sasha Levin

cgroup1: don't allow '\n' in renaming

2021-06-16T09:53:02Z

commit b7e24eb1caa5f8da20d405d262dba67943aedc42 upstream. cgroup_mkdir() have restriction on newline usage in names: $ mkdir $'/sys/fs/cgroup/cpu/test\ntest2' mkdir: cannot create directory '/sys/fs/cgroup/cpu/test\ntest2': Invalid argument But in cgroup1_rename() such check is missed. This allows us to make /proc//cgroup unparsable: $ mkdir /sys/fs/cgroup/cpu/test $ mv /sys/fs/cgroup/cpu/test $'/sys/fs/cgroup/cpu/test\ntest2' $ echo $$ > $'/sys/fs/cgroup/cpu/test\ntest2' $ cat /proc/self/cgroup 11:pids:/ 10:freezer:/ 9:hugetlb:/ 8:cpuset:/ 7:blkio:/user.slice 6:memory:/user.slice 5:net_cls,net_prio:/ 4:perf_event:/ 3:devices:/user.slice 2:cpu,cpuacct:/test test2 1:name=systemd:/ 0::/ Signed-off-by: Alexander Kuznetsov Reported-by: Andrey Krasichkov Acked-by: Dmitry Yakunin Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

cgroup: disable controllers at parse time

2021-06-16T09:53:01Z

[ Upstream commit 45e1ba40837ac2f6f4d4716bddb8d44bd7e4a251 ] This patch effectively reverts the commit a3e72739b7a7 ("cgroup: fix too early usage of static_branch_disable()"). The commit 6041186a3258 ("init: initialize jump labels before command line option parsing") has moved the jump_label_init() before parse_args() which has made the commit a3e72739b7a7 unnecessary. On the other hand there are consequences of disabling the controllers later as there are subsystems doing the controller checks for different decisions. One such incident is reported [1] regarding the memory controller and its impact on memory reclaim code. [1] https://lore.kernel.org/linux-mm/921e53f3-4b13-aab8-4a9e-e83ff15371e4@nec.com Signed-off-by: Shakeel Butt Reported-by: NOMURA JUNICHI(野村　淳一) Signed-off-by: Tejun Heo Tested-by: Jun'ichi Nomura Signed-off-by: Sasha Levin