user/sven/linux.git/kernel/dma, branch v5.10.170

swiotlb: max mapping size takes min align mask into account

2022-10-05T08:38:40Z

commit 82806744fd7dde603b64c151eeddaa4ee62193fd upstream. swiotlb_find_slots() skips slots according to io tlb aligned mask calculated from min aligned mask and original physical address offset. This affects max mapping size. The mapping size can't achieve the IO_TLB_SEGSIZE * IO_TLB_SIZE when original offset is non-zero. This will cause system boot up failure in Hyper-V Isolation VM where swiotlb force is enabled. Scsi layer use return value of dma_max_mapping_size() to set max segment size and it finally calls swiotlb_max_mapping_size(). Hyper-V storage driver sets min align mask to 4k - 1. Scsi layer may pass 256k length of request buffer with 0~4k offset and Hyper-V storage driver can't get swiotlb bounce buffer via DMA API. Swiotlb_find_slots() can't find 256k length bounce buffer with offset. Make swiotlb_max_mapping _size() take min align mask into account. Signed-off-by: Tianyu Lan Signed-off-by: Christoph Hellwig Signed-off-by: Rishabh Bhatnagar Signed-off-by: Greg Kroah-Hartman

swiotlb: avoid potential left shift overflow

2022-09-15T09:32:06Z

[ Upstream commit 3f0461613ebcdc8c4073e235053d06d5aa58750f ] The second operand passed to slot_addr() is declared as int or unsigned int in all call sites. The left-shift to get the offset of a slot can overflow if swiotlb size is larger than 4G. Convert the macro to an inline function and declare the second argument as phys_addr_t to avoid the potential overflow. Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single") Signed-off-by: Chao Gao Reviewed-by: Dongli Zhang Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

dma-direct: don't over-decrypt memory

2022-06-22T12:13:20Z

commit 4a37f3dd9a83186cb88d44808ab35b78375082c9 upstream. The original x86 sev_alloc() only called set_memory_decrypted() on memory returned by alloc_pages_node(), so the page order calculation fell out of that logic. However, the common dma-direct code has several potential allocators, not all of which are guaranteed to round up the underlying allocation to a power-of-two size, so carrying over that calculation for the encryption/decryption size was a mistake. Fix it by rounding to a *number* of pages, rather than an order. Until recently there was an even worse interaction with DMA_DIRECT_REMAP where we could have ended up decrypting part of the next adjacent vmalloc area, only averted by no architecture actually supporting both configs at once. Don't ask how I found that one out... Fixes: c10f07aa27da ("dma/direct: Handle force decryption for DMA coherent buffers in common code") Signed-off-by: Robin Murphy Signed-off-by: Christoph Hellwig Acked-by: David Rientjes [ backport the functional change without all the prior refactoring ] Signed-off-by: Robin Murphy Signed-off-by: Greg Kroah-Hartman

dma-debug: make things less spammy under memory pressure

2022-06-22T12:13:13Z

[ Upstream commit e19f8fa6ce1ca9b8b934ba7d2e8f34c95abc6e60 ] Limit the error msg to avoid flooding the console. If you have a lot of threads hitting this at once, they could have already gotten passed the dma_debug_disabled() check before they get to the point of allocation failure, resulting in quite a lot of this error message spamming the log. Use pr_err_once() to limit that. Signed-off-by: Rob Clark Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC

2022-06-09T08:20:54Z

[ Upstream commit 84bc4f1dbbbb5f8aa68706a96711dccb28b518e5 ] We observed the error "cacheline tracking ENOMEM, dma-debug disabled" during a light system load (copying some files). The reason for this error is that the dma_active_cacheline radix tree uses GFP_NOWAIT allocation - so it can't access the emergency memory reserves and it fails as soon as anybody reaches the watermark. This patch changes GFP_NOWAIT to GFP_ATOMIC, so that it can access the emergency memory reserves. Signed-off-by: Mikulas Patocka Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

Reinstate some of "swiotlb: rework "fix info leak with DMA_FROM_DEVICE""

2022-05-25T07:17:55Z

[ Upstream commit 901c7280ca0d5e2b4a8929fbe0bfb007ac2a6544 ] Halil Pasic points out [1] that the full revert of that commit (revert in bddac7c1e02b), and that a partial revert that only reverts the problematic case, but still keeps some of the cleanups is probably better. And that partial revert [2] had already been verified by Oleksandr Natalenko to also fix the issue, I had just missed that in the long discussion. So let's reinstate the cleanups from commit aa6f8dcbab47 ("swiotlb: rework "fix info leak with DMA_FROM_DEVICE""), and effectively only revert the part that caused problems. Link: https://lore.kernel.org/all/20220328013731.017ae3e3.pasic@linux.ibm.com/ [1] Link: https://lore.kernel.org/all/20220324055732.GB12078@lst.de/ [2] Link: https://lore.kernel.org/all/4386660.LvFx2qVVIh@natalenko.name/ [3] Suggested-by: Halil Pasic Tested-by: Oleksandr Natalenko Cc: Christoph Hellwig" Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

Revert "swiotlb: fix info leak with DMA_FROM_DEVICE"

2022-05-25T07:17:55Z

This reverts commit d4d975e7921079f877f828099bb8260af335508f. Upstream had a follow-up fix, revert, and a semi-reverted-revert. Instead of going through this chain which is more painful to backport, I'm just going to revert this original commit and pick the final one. Signed-off-by: Sasha Levin

dma-direct: avoid redundant memory sync for swiotlb

2022-04-20T07:23:30Z

commit 9e02977bfad006af328add9434c8bffa40e053bb upstream. When we looked into FIO performance with swiotlb enabled in VM, we found swiotlb_bounce() is always called one more time than expected for each DMA read request. It turns out that the bounce buffer is copied to original DMA buffer twice after the completion of a DMA request (one is done by in dma_direct_sync_single_for_cpu(), the other by swiotlb_tbl_unmap_single()). But the content in bounce buffer actually doesn't change between the two rounds of copy. So, one round of copy is redundant. Pass DMA_ATTR_SKIP_CPU_SYNC flag to swiotlb_tbl_unmap_single() to skip the memory copy in it. This fix increases FIO 64KB sequential read throughput in a guest with swiotlb=force by 5.6%. Fixes: 55897af63091 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code") Reported-by: Wang Zhaoyang1 Reported-by: Gao Liang Signed-off-by: Chao Gao Reviewed-by: Kevin Tian Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman

dma-debug: fix return value of __setup handlers

2022-04-08T12:40:25Z

[ Upstream commit 80e4390981618e290616dbd06ea190d4576f219d ] When valid kernel command line parameters dma_debug=off dma_debug_entries=100 are used, they are reported as Unknown parameters and added to init's environment strings, polluting it. Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5 dma_debug=off dma_debug_entries=100", will be passed to user space. and Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc5 dma_debug=off dma_debug_entries=100 Return 1 from these __setup handlers to indicate that the command line option has been handled. Fixes: 59d3daafa1726 ("dma-debug: add kernel command line parameters") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Joerg Roedel Cc: Christoph Hellwig Cc: Marek Szyprowski Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

swiotlb: fix info leak with DMA_FROM_DEVICE

2022-04-08T12:39:46Z

commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e upstream. The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. Signed-off-by: Halil Pasic Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman