user/sven/linux.git/kernel/irq/manage.c, branch v4.4

genirq: Prevent chip buslock deadlock

2015-12-14T08:45:06Z

If a interrupt chip utilizes chip->buslock then free_irq() can deadlock in the following way: CPU0 CPU1 interrupt(X) (Shared or spurious) free_irq(X) interrupt_thread(X) chip_bus_lock(X) irq_finalize_oneshot(X) chip_bus_lock(X) synchronize_irq(X) synchronize_irq() waits for the interrupt thread to complete, i.e. forever. Solution is simple: Drop chip_bus_lock() before calling synchronize_irq() as we do with the irq_desc lock. There is nothing to be protected after the point where irq_desc lock has been released. This adds chip_bus_lock/unlock() to the remove_irq() code path, but that's actually correct in the case where remove_irq() is called on such an interrupt. The current users of remove_irq() are not affected as none of those interrupts is on a chip which requires buslock. Reported-by: Fredrik Markström Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2015-11-04T17:41:05Z

Pull networking updates from David Miller: Changes of note: 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell. 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from David Ahern. 3) Allow the user to ask for the statistics to be filtered out of ipv4/ipv6 address netlink dumps. From Sowmini Varadhan. 4) More work to pass the network namespace context around deep into various packet path APIs, starting with the netfilter hooks. From Eric W Biederman. 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas Richter. 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng. 7) Support Very High Throughput in wireless MESH code, from Bob Copeland. 8) Allow setting the ageing_time in switchdev/rocker. From Scott Feldman. 9) Properly autoload L2TP type modules, from Stephen Hemminger. 10) Fix and enable offload features by default in 8139cp driver, from David Woodhouse. 11) Support both ipv4 and ipv6 sockets in a single vxlan device, from Jiri Benc. 12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning Opstad. 13) Fix IPSEC flowcache overflows on large systems, from Steffen Klassert. 14) Convert bridging to track VLANs using rhashtable entries rather than a bitmap. From Nikolay Aleksandrov. 15) Make TCP listener handling completely lockless, this is a major accomplishment. Incoming request sockets now live in the established hash table just like any other socket too. From Eric Dumazet. 15) Provide more bridging attributes to netlink, from Nikolay Aleksandrov. 16) Use hash based algorithm for ipv4 multipath routing, this was very long overdue. From Peter Nørlund. 17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann. 18) Allow non-root execution of EBPF programs, from Alexei Starovoitov. 19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This influences the port binding selection logic used by SO_REUSEPORT. 20) Add ipv6 support to VRF, from David Ahern. 21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko. 22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen. 23) Implement RACK loss recovery in TCP, from Yuchung Cheng. 24) Support multipath routes in MPLS, from Roopa Prabhu. 25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric Dumazet. 26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and Sudarsana Kalluru. 27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic Sowa. 28) Support ipv6 geneve tunnels, from John W Linville. 29) Add flood control support to switchdev layer, from Ido Schimmel. 30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from Hannes Frederic Sowa. 31) Support persistent maps and progs in bpf, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits) sh_eth: use DMA barriers switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion net: sched: kill dead code in sch_choke.c irda: Delete an unnecessary check before the function call "irlmp_unregister_service" net: dsa: mv88e6xxx: include DSA ports in VLANs net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports net/core: fix for_each_netdev_feature vlan: Invoke driver vlan hooks only if device is present arcnet/com20020: add LEDS_CLASS dependency bpf, verifier: annotate verbose printer with __printf dp83640: Only wait for timestamps for packets with timestamping enabled. ptp: Change ptp_class to a proper bitmask dp83640: Prune rx timestamp list before reading from it dp83640: Delay scheduled work. dp83640: Include hash in timestamp/packet matching ipv6: fix tunnel error handling net/mlx5e: Fix LSO vlan insertion net/mlx5e: Re-eanble client vlan TX acceleration net/mlx5e: Return error in case mlx5e_set_features() fails net/mlx5e: Don't allow more than max supported channels ...

genirq: Add flag to force mask in disable_irq[_nosync]()

2015-10-11T09:33:42Z

If an irq chip does not implement the irq_disable callback, then we use a lazy approach for disabling the interrupt. That means that the interrupt is marked disabled, but the interrupt line is not immediately masked in the interrupt chip. It only becomes masked if the interrupt is raised while it's marked disabled. We use this to avoid possibly expensive mask/unmask operations for common case operations. Unfortunately there are devices which do not allow the interrupt to be disabled easily at the device level. They are forced to use disable_irq_nosync(). This can result in taking each interrupt twice. Instead of enforcing the non lazy mode on all interrupts of a irq chip, provide a settings flag, which can be set by the driver for that particular interrupt line. Reported-and-tested-by: Duc Dang Signed-off-by: Thomas Gleixner Cc: Marc Zyngier Cc: Jason Cooper Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1510092348370.6097@nanos

genirq: Make irq_set_vcpu_affinity available for CONFIG_SMP=n

2015-10-09T20:47:27Z

irq_set_vcpu_affinity() is needed when CONFIG_SMP=n, so move the definition out of "#ifdef CONFIG_SMP" Suggested-by: Paolo Bonzini Signed-off-by: Feng Wu Cc: jiang.liu@linux.intel.com Cc: pbonzini@redhat.com Link: http://lkml.kernel.org/r/1443860438-144926-1-git-send-email-feng.wu@intel.com Signed-off-by: Thomas Gleixner

irq: Export per-cpu irq allocation and de-allocation functions

2015-09-29T18:51:40Z

Some drivers might use the per-cpu interrupts and still might be built as a module. Export request_percpu_irq an free_percpu_irq to these user, which also make it consistent with enable/disable_percpu_irq that were exported. Reported-by: Willy Tarreau Signed-off-by: Maxime Ripard Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller

genirq: Fix the documentation of request_percpu_irq

2015-09-29T18:51:40Z

The documentation of request_percpu_irq is confusing and suggest that the interrupt is not enabled at all, while it is actually enabled on the local CPU. Clarify that. Signed-off-by: Maxime Ripard Signed-off-by: Gregory CLEMENT Signed-off-by: David S. Miller

genirq: Handle force threading of irqs with primary and thread handler

2015-09-22T10:39:57Z

Force threading of interrupts does not really deal with interrupts which are requested with a primary and a threaded handler. The current policy is to leave them alone and let the primary handler run in interrupt context, but we set the ONESHOT flag for those interrupts as well. Kohji Okuno debugged a problem with the SDHCI driver where the interrupt thread waits for a hardware interrupt to trigger, which can't work well because the hardware interrupt is masked due to the ONESHOT flag being set. He proposed to set the ONESHOT flag only if the interrupt does not provide a thread handler. Though that does not work either because these interrupts can be shared. So the other interrupt would rightfully get the ONESHOT flag set and therefor the same situation would happen again. To deal with this proper, we need to force thread the primary handler of such interrupts as well. That means that the primary interrupt handler is treated as any other primary interrupt handler which is not marked IRQF_NO_THREAD. The threaded handler becomes a separate thread so the SDHCI flow logic can be handled gracefully. The same issue was reported against 4.1-rt. Reported-and-tested-by: Kohji Okuno Reported-By: Michal Smucr Reported-and-tested-by: Nathan Sullivan Signed-off-by: Thomas Gleixner Cc: Sebastian Andrzej Siewior Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1509211058080.5606@nanos Signed-off-by: Thomas Gleixner

genirq: Move field 'affinity' from irq_data into irq_common_data

2015-09-16T13:46:49Z

Irq affinity mask is per-irq instead of per irqchip, so move it into struct irq_common_data. Signed-off-by: Jiang Liu Cc: Konrad Rzeszutek Wilk Cc: Tony Luck Cc: Bjorn Helgaas Cc: Benjamin Herrenschmidt Cc: Randy Dunlap Cc: Yinghai Lu Cc: Borislav Petkov Cc: Jason Cooper Cc: Kevin Cernekee Cc: Arnd Bergmann Link: http://lkml.kernel.org/r/1433303281-27688-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner

genirq: Export irq_[get|set]_irqchip_state()

2015-07-27T06:09:38Z

Export these functions to be able to build the Qualcomm family A PMIC gpio and mpp drivers as modules. [ tglx: Made them GPL exports ] Signed-off-by: Bjorn Andersson Reviewed-by: Mark Brown Cc: Marc Zyngier Cc: Cc: Cc: Srinivas Kandagatla Cc: Linus Walleij Link: http://lkml.kernel.org/r/1437594184-22966-1-git-send-email-bjorn.andersson@sonymobile.com Signed-off-by: Thomas Gleixner

genirq: Remove the irq argument from setup_affinity()

2015-07-11T21:14:25Z

Unused except for the alpha wrapper, which can retrieve if from the irq descriptor. Signed-off-by: Jiang Liu Cc: Konrad Rzeszutek Wilk Cc: Tony Luck Cc: Bjorn Helgaas Cc: Benjamin Herrenschmidt Cc: Randy Dunlap Cc: Yinghai Lu Cc: Borislav Petkov Link: http://lkml.kernel.org/r/1433391238-19471-21-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner