user/sven/linux.git/kernel/irq, branch v4.4.234

genirq/generic_pending: Do not lose pending affinity update

2020-06-03T06:12:14Z

commit a33a5d2d16cb84bea8d5f5510f3a41aa48b5c467 upstream. The generic pending interrupt mechanism moves interrupts from the interrupt handler on the original target CPU to the new destination CPU. This is required for x86 and ia64 due to the way the interrupt delivery and acknowledge works if the interrupts are not remapped. However that update can fail for various reasons. Some of them are valid reasons to discard the pending update, but the case, when the previous move has not been fully cleaned up is not a legit reason to fail. Check the return value of irq_do_set_affinity() for -EBUSY, which indicates a pending cleanup, and rearm the pending move in the irq dexcriptor so it's tried again when the next interrupt arrives. Fixes: 996c591227d9 ("x86/irq: Plug vector cleanup race") Signed-off-by: Thomas Gleixner Tested-by: Song Liu Cc: Joerg Roedel Cc: Peter Zijlstra Cc: Song Liu Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: stable@vger.kernel.org Cc: Mike Travis Cc: Borislav Petkov Cc: Tariq Toukan Cc: Guenter Roeck Link: https://lkml.kernel.org/r/20180604162224.386544292@linutronix.de Signed-off-by: Greg Kroah-Hartman

genirq: Fix reference leaks on irq affinity notifiers

2020-04-02T17:02:36Z

commit df81dfcfd6991d547653d46c051bac195cd182c1 upstream. The handling of notify->work did not properly maintain notify->kref in two cases: 1) where the work was already scheduled, another irq_set_affinity_locked() would get the ref and (no-op-ly) schedule the work. Thus when irq_affinity_notify() ran, it would drop the original ref but not the additional one. 2) when cancelling the (old) work in irq_set_affinity_notifier(), if there was outstanding work a ref had been got for it but was never put. Fix both by checking the return values of the work handling functions (schedule_work() for (1) and cancel_work_sync() for (2)) and put the extra ref if the return value indicates preexisting work. Fixes: cd7eab44e994 ("genirq: Add IRQ affinity notifiers") Fixes: 59c39840f5ab ("genirq: Prevent use-after-free and work list corruption") Signed-off-by: Edward Cree Signed-off-by: Thomas Gleixner Acked-by: Ben Hutchings Link: https://lkml.kernel.org/r/24f5983f-2ab5-e83a-44ee-a45b5f9300f5@solarflare.com Signed-off-by: Greg Kroah-Hartman

genirq: Prevent NULL pointer dereference in resend_irqs()

2019-09-21T05:12:43Z

commit eddf3e9c7c7e4d0707c68d1bb22cc6ec8aef7d4a upstream. The following crash was observed: Unable to handle kernel NULL pointer dereference at 0000000000000158 Internal error: Oops: 96000004 [#1] SMP pc : resend_irqs+0x68/0xb0 lr : resend_irqs+0x64/0xb0 ... Call trace: resend_irqs+0x68/0xb0 tasklet_action_common.isra.6+0x84/0x138 tasklet_action+0x2c/0x38 __do_softirq+0x120/0x324 run_ksoftirqd+0x44/0x60 smpboot_thread_fn+0x1ac/0x1e8 kthread+0x134/0x138 ret_from_fork+0x10/0x18 The reason for this is that the interrupt resend mechanism happens in soft interrupt context, which is a asynchronous mechanism versus other operations on interrupts. free_irq() does not take resend handling into account. Thus, the irq descriptor might be already freed before the resend tasklet is executed. resend_irqs() does not check the return value of the interrupt descriptor lookup and derefences the return value unconditionally. 1): __setup_irq irq_startup check_irq_resend // activate softirq to handle resend irq 2): irq_domain_free_irqs irq_free_descs free_desc call_rcu(&desc->rcu, delayed_free_desc) 3): __do_softirq tasklet_action resend_irqs desc = irq_to_desc(irq) desc->handle_irq(desc) // desc is NULL --> Ooops Fix this by adding a NULL pointer check in resend_irqs() before derefencing the irq descriptor. Fixes: a4633adcdbc1 ("[PATCH] genirq: add genirq sw IRQ-retrigger") Signed-off-by: Yunfeng Ye Signed-off-by: Thomas Gleixner Reviewed-by: Zhiqiang Liu Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1630ae13-5c8e-901e-de09-e740b6a426a7@huawei.com Signed-off-by: Greg Kroah-Hartman

genirq: Prevent use-after-free and work list corruption

2019-05-16T17:45:04Z

[ Upstream commit 59c39840f5abf4a71e1810a8da71aaccd6c17d26 ] When irq_set_affinity_notifier() replaces the notifier, then the reference count on the old notifier is dropped which causes it to be freed. But nothing ensures that the old notifier is not longer queued in the work list. If it is queued this results in a use after free and possibly in work list corruption. Ensure that the work is canceled before the reference is dropped. Signed-off-by: Prasad Sodagudi Signed-off-by: Thomas Gleixner Cc: marc.zyngier@arm.com Link: https://lkml.kernel.org/r/1553439424-6529-1-git-send-email-psodagud@codeaurora.org Signed-off-by: Sasha Levin

genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent()

2019-04-27T07:33:55Z

commit 325aa19598e410672175ed50982f902d4e3f31c5 upstream. If a child irqchip calls irq_chip_set_wake_parent() but its parent irqchip has the IRQCHIP_SKIP_SET_WAKE flag set an error is returned. This is inconsistent behaviour vs. set_irq_wake_real() which returns 0 when the irqchip has the IRQCHIP_SKIP_SET_WAKE flag set. It doesn't attempt to walk the chain of parents and set irq wake on any chips that don't have the flag set either. If the intent is to call the .irq_set_wake() callback of the parent irqchip, then we expect irqchip implementations to omit the IRQCHIP_SKIP_SET_WAKE flag and implement an .irq_set_wake() function that calls irq_chip_set_wake_parent(). The problem has been observed on a Qualcomm sdm845 device where set wake fails on any GPIO interrupts after applying work in progress wakeup irq patches to the GPIO driver. The chain of chips looks like this: QCOM GPIO -> QCOM PDC (SKIP) -> ARM GIC (SKIP) The GPIO controllers parent is the QCOM PDC irqchip which in turn has ARM GIC as parent. The QCOM PDC irqchip has the IRQCHIP_SKIP_SET_WAKE flag set, and so does the grandparent ARM GIC. The GPIO driver doesn't know if the parent needs to set wake or not, so it unconditionally calls irq_chip_set_wake_parent() causing this function to return a failure because the parent irqchip (PDC) doesn't have the .irq_set_wake() callback set. Returning 0 instead makes everything work and irqs from the GPIO controller can be configured for wakeup. Make it consistent by returning 0 (success) from irq_chip_set_wake_parent() when a parent chip has IRQCHIP_SKIP_SET_WAKE set. [ tglx: Massaged changelog ] Fixes: 08b55e2a9208e ("genirq: Add irqchip_set_wake_parent") Signed-off-by: Stephen Boyd Signed-off-by: Thomas Gleixner Acked-by: Marc Zyngier Cc: linux-arm-kernel@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: Lina Iyer Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190325181026.247796-1-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman

genirq: Fix race on spurious interrupt detection

2018-11-21T08:27:35Z

commit 746a923b863a1065ef77324e1e43f19b1a3eab5c upstream. Commit 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of threaded irqs") made detection of spurious interrupts work for threaded handlers by: a) incrementing a counter every time the thread returns IRQ_HANDLED, and b) checking whether that counter has increased every time the thread is woken. However for oneshot interrupts, the commit unmasks the interrupt before incrementing the counter. If another interrupt occurs right after unmasking but before the counter is incremented, that interrupt is incorrectly considered spurious: time | irq_thread() | irq_thread_fn() | action->thread_fn() | irq_finalize_oneshot() | unmask_threaded_irq() /* interrupt is unmasked */ | | /* interrupt fires, incorrectly deemed spurious */ | | atomic_inc(&desc->threads_handled); /* counter is incremented */ v This is observed with a hi3110 CAN controller receiving data at high volume (from a separate machine sending with "cangen -g 0 -i -x"): The controller signals a huge number of interrupts (hundreds of millions per day) and every second there are about a dozen which are deemed spurious. In theory with high CPU load and the presence of higher priority tasks, the number of incorrectly detected spurious interrupts might increase beyond the 99,900 threshold and cause disablement of the interrupt. In practice it just increments the spurious interrupt count. But that can cause people to waste time investigating it over and over. Fix it by moving the accounting before the invocation of irq_finalize_oneshot(). [ tglx: Folded change log update ] Fixes: 1e77d0a1ed74 ("genirq: Sanitize spurious interrupt detection of threaded irqs") Signed-off-by: Lukas Wunner Signed-off-by: Thomas Gleixner Cc: Mathias Duckeck Cc: Akshay Bhat Cc: Casey Fitzpatrick Cc: stable@vger.kernel.org # v3.16+ Link: https://lkml.kernel.org/r/1dfd8bbd16163940648045495e3e9698e63b50ad.1539867047.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman

genirq: Delay incrementing interrupt count if it's disabled/pending

2018-09-15T07:40:40Z

commit a946e8c717f9355d1abd5408ed0adc0002d1aed1 upstream. In case of a wakeup interrupt, irq_pm_check_wakeup disables the interrupt and marks it pending and suspended, disables it and notifies the pm core about the wake event. The interrupt gets handled later once the system is resumed. However the irq stats is updated twice: once when it's disabled waiting for the system to resume and later when it's handled, resulting in wrong counting of the wakeup interrupt when waking up the system. This patch updates the interrupt count so that it's updated only when the interrupt gets handled. It's already handled correctly in handle_edge_irq and handle_edge_eoi_irq. Reported-by: Manoil Claudiu Signed-off-by: Sudeep Holla Cc: Marc Zyngier Link: http://lkml.kernel.org/r/1446661957-1019-1-git-send-email-sudeep.holla@arm.com Signed-off-by: Thomas Gleixner Signed-off-by: Hanjun Guo Signed-off-by: Greg Kroah-Hartman

genirq: Make force irq threading setup more robust

2018-08-09T10:19:27Z

commit d1f0301b3333eef5efbfa1fe0f0edbea01863d5d upstream. The support of force threading interrupts which are set up with both a primary and a threaded handler wreckaged the setup of regular requested threaded interrupts (primary handler == NULL). The reason is that it does not check whether the primary handler is set to the default handler which wakes the handler thread. Instead it replaces the thread handler with the primary handler as it would do with force threaded interrupts which have been requested via request_irq(). So both the primary and the thread handler become the same which then triggers the warnon that the thread handler tries to wakeup a not configured secondary thread. Fortunately this only happens when the driver omits the IRQF_ONESHOT flag when requesting the threaded interrupt, which is normaly caught by the sanity checks when force irq threading is disabled. Fix it by skipping the force threading setup when a regular threaded interrupt is requested. As a consequence the interrupt request which lacks the IRQ_ONESHOT flag is rejected correctly instead of silently wreckaging it. Fixes: 2a1d3ab8986d ("genirq: Handle force threading of irqs with primary and thread handler") Reported-by: Kurt Kanzenbach Signed-off-by: Thomas Gleixner Tested-by: Kurt Kanzenbach Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

genirq: Use cpumask_available() for check of cpumask variable

2018-04-08T09:51:57Z

commit d170fe7dd992b313d4851ae5ab77ee7a51ed8c72 upstream. This fixes the following clang warning when CONFIG_CPUMASK_OFFSTACK=n: kernel/irq/manage.c:839:28: error: address of array 'desc->irq_common_data.affinity' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] Signed-off-by: Matthias Kaehlcke Cc: Grant Grundler Cc: Rusty Russell Cc: Greg Hackmann Cc: Michael Davidson Cc: Andrew Morton Link: http://lkml.kernel.org/r/20170412182030.83657-2-mka@chromium.org Signed-off-by: Thomas Gleixner Cc: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

Revert "genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs"

2018-03-31T16:12:32Z

This reverts commit 9d0273bb1c4b645817eccfe5c5975ea29add3300 which is commit 382bd4de61827dbaaf5fb4fb7b1f4be4a86505e7 upstream. It causes too many problems with the stable tree, and would require too many other things to be backported, so just revert it. Reported-by: Guenter Roeck Cc: Thomas Gleixner Cc: Hans de Goede Cc: Marc Zyngier Cc: Thomas Gleixner Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman