user/sven/linux.git/kernel/irq, branch v5.15.44

random: remove unused irq_flags argument from add_interrupt_randomness()

2022-05-30T07:29:00Z

commit 703f7066f40599c290babdb79dd61319264987e9 upstream. Since commit ee3e00e9e7101 ("random: use registers from interrupted code for CPU's w/o a cycle counter") the irq_flags argument is no longer used. Remove unused irq_flags. Cc: Borislav Petkov Cc: Dave Hansen Cc: Dexuan Cui Cc: H. Peter Anvin Cc: Haiyang Zhang Cc: Ingo Molnar Cc: K. Y. Srinivasan Cc: Stephen Hemminger Cc: Thomas Gleixner Cc: Wei Liu Cc: linux-hyperv@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Sebastian Andrzej Siewior Acked-by: Wei Liu Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

genirq: Synchronize interrupt thread startup

2022-05-12T10:30:06Z

commit 8707898e22fd665bc1d7b18b809be4b56ce25bdd upstream. A kernel hang can be observed when running setserial in a loop on a kernel with force threaded interrupts. The sequence of events is: setserial open("/dev/ttyXXX") request_irq() do_stuff() -> serial interrupt -> wake(irq_thread) desc->threads_active++; close() free_irq() kthread_stop(irq_thread) synchronize_irq() <- hangs because desc->threads_active != 0 The thread is created in request_irq() and woken up, but does not get on a CPU to reach the actual thread function, which would handle the pending wake-up. kthread_stop() sets the should stop condition which makes the thread immediately exit, which in turn leaves the stale threads_active count around. This problem was introduced with commit 519cc8652b3a, which addressed a interrupt sharing issue in the PCIe code. Before that commit free_irq() invoked synchronize_irq(), which waits for the hard interrupt handler and also for associated threads to complete. To address the PCIe issue synchronize_irq() was replaced with __synchronize_hardirq(), which only waits for the hard interrupt handler to complete, but not for threaded handlers. This was done under the assumption, that the interrupt thread already reached the thread function and waits for a wake-up, which is guaranteed to be handled before acting on the stop condition. The problematic case, that the thread would not reach the thread function, was obviously overlooked. Make sure that the interrupt thread is really started and reaches thread_fn() before returning from __setup_irq(). This utilizes the existing wait queue in the interrupt descriptor. The wait queue is unused for non-shared interrupts. For shared interrupts the usage might cause a spurious wake-up of a waiter in synchronize_irq() or the completion of a threaded handler might cause a spurious wake-up of the waiter for the ready flag. Both are harmless and have no functional impact. [ tglx: Amended changelog ] Fixes: 519cc8652b3a ("genirq: Synchronize only with single thread on free_irq()") Signed-off-by: Thomas Pfaff Signed-off-by: Thomas Gleixner Reviewed-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/552fe7b4-9224-b183-bb87-a8f36d335690@pcs.com Signed-off-by: Greg Kroah-Hartman

genirq/affinity: Consider that CPUs on nodes can be unbalanced

2022-04-20T07:34:20Z

commit 08d835dff916bfe8f45acc7b92c7af6c4081c8a7 upstream. If CPUs on a node are offline at boot time, the number of nodes is different when building affinity masks for present cpus and when building affinity masks for possible cpus. This causes the following problem: In the case that the number of vectors is less than the number of nodes there are cases where bits of masks for present cpus are overwritten when building masks for possible cpus. Fix this by excluding CPUs, which are not part of the current build mask (present/possible). [ tglx: Massaged changelog and added comment ] Fixes: b82592199032 ("genirq/affinity: Spread IRQs to all available NUMA nodes") Signed-off-by: Rei Yamamoto Signed-off-by: Thomas Gleixner Reviewed-by: Ming Lei Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220331003309.10891-1-yamamoto.rei@jp.fujitsu.com Signed-off-by: Greg Kroah-Hartman

PCI/MSI: Move non-mask check back into low level accessors

2021-11-18T18:17:14Z

commit 9c8e9c9681a0f3f1ae90a90230d059c7a1dece5a upstream. The recent rework of PCI/MSI[X] masking moved the non-mask checks from the low level accessors into the higher level mask/unmask functions. This missed the fact that these accessors can be invoked from other places as well. The missing checks break XEN-PV which sets pci_msi_ignore_mask and also violates the virtual MSIX and the msi_attrib.maskbit protections. Instead of sprinkling checks all over the place, lift them back into the low level accessor functions. To avoid checking three different conditions combine them into one property of msi_desc::msi_attrib. [ josef: Fixed the missed conversion in the core code ] Fixes: fcacdfbef5a1 ("PCI/MSI: Provide a new set of mask and unmask functions") Reported-by: Josef Johansson Signed-off-by: Thomas Gleixner Tested-by: Josef Johansson Cc: Bjorn Helgaas Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'irqchip-fixes-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

2021-09-24T12:11:04Z

Pull irqchip fixes from Marc Zyngier: - Work around a bad GIC integration on a Renesas platform, where the interconnect cannot deal with byte-sized MMIO accesses - Cleanup another Renesas driver abusing the comma operator - Fix a potential GICv4 memory leak on an error path - Make the type of 'size' consistent with the rest of the code in __irq_domain_add() - Fix a regression in the Armada 370-XP IPI path - Fix the build for the obviously unloved goldfish-pic - Some documentation fixes Link: https://lore.kernel.org/r/20210924090933.2766857-1-maz@kernel.org

irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent

2021-09-22T13:29:32Z

The 'size' is used in struct_size(domain, revmap, size) and its input parameter type is 'size_t'(unsigned int). Changing the size to 'unsigned int' to make the type consistent. Signed-off-by: Bixuan Cui Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20210916025203.44841-1-cuibixuan@huawei.com

Merge tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2021-09-03T18:22:50Z

Pull powerpc updates from Michael Ellerman: - Convert pseries & powernv to use MSI IRQ domains. - Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are given a CPU number on the same node as previously, when possible. - Add support for a new more flexible device-tree format for specifying NUMA distances. - Convert powerpc to GENERIC_PTDUMP. - Retire sbc8548 and sbc8641d board support. - Various other small features and fixes. Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, and Zheng Yongjun. * tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits) powerpc/bug: Cast to unsigned long before passing to inline asm powerpc/ptdump: Fix generic ptdump for 64-bit KVM: PPC: Fix clearing never mapped TCEs in realmode powerpc/pseries/iommu: Rename "direct window" to "dma window" powerpc/pseries/iommu: Make use of DDW for indirect mapping powerpc/pseries/iommu: Find existing DDW with given property name powerpc/pseries/iommu: Update remove_dma_window() to accept property name powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw() powerpc/pseries/iommu: Allow DDW windows starting at 0x00 powerpc/pseries/iommu: Add ddw_list_new_entry() helper powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper powerpc/kernel/iommu: Add new iommu_table_in_use() helper powerpc/pseries/iommu: Replace hard-coded page shift powerpc/numa: Update cpu_cpu_map on CPU online/offline powerpc/numa: Print debug statements only when required powerpc/numa: convert printk to pr_xxx powerpc/numa: Drop dbg in favour of pr_debug powerpc/smp: Enable CACHE domain for shared processor powerpc/smp: Update cpu_core_map on all PowerPc systems ...

Merge tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2021-08-30T21:38:37Z

Pull irq updates from Thomas Gleixner: "Updates to the interrupt core and driver subsystems: Core changes: - The usual set of small fixes and improvements all over the place, but nothing stands out MSI changes: - Further consolidation of the PCI/MSI interrupt chip code - Make MSI sysfs code independent of PCI/MSI and expose the MSI interrupts of platform devices in the same way as PCI exposes them. Driver changes: - Support for ARM GICv3 EPPI partitions - Treewide conversion to generic_handle_domain_irq() for all chained interrupt controllers - Conversion to bitmap_zalloc() throughout the irq chip drivers - The usual set of small fixes and improvements" * tag 'irq-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) platform-msi: Add ABI to show msi_irqs of platform devices genirq/msi: Move MSI sysfs handling from PCI to MSI core genirq/cpuhotplug: Demote debug printk to KERN_DEBUG irqchip/qcom-pdc: Trim unused levels of the interrupt hierarchy irqdomain: Export irq_domain_disconnect_hierarchy() irqchip/gic-v3: Fix priority comparison when non-secure priorities are used irqchip/apple-aic: Fix irq_disable from within irq handlers pinctrl/rockchip: drop the gpio related codes gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type gpio/rockchip: support next version gpio controller gpio/rockchip: use struct rockchip_gpio_regs for gpio controller gpio/rockchip: add driver for rockchip gpio dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank pinctrl/rockchip: add pinctrl device to gpio bank struct pinctrl/rockchip: separate struct rockchip_pin_bank to a head file pinctrl/rockchip: always enable clock for gpio controller genirq: Fix kernel doc indentation EDAC/altera: Convert to generic_handle_domain_irq() powerpc: Bulk conversion to generic_handle_domain_irq() nios2: Bulk conversion to generic_handle_domain_irq() ...

Merge tag 'irqchip-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

2021-08-29T19:19:50Z

Pull irqchip updates from Marc Zyngier: - API updates: - Treewide conversion to generic_handle_domain_irq() for anything that looks like a chained interrupt controller - Update the irqdomain documentation - Use of bitmap_zalloc() throughout the tree - New functionalities: - Support for GICv3 EPPI partitions - Fixes: - Qualcomm PDC hierarchy fixes - Yet another priority decoding fix for the GICv3 pseudo-NMIs - Fix the apple-aic driver irq_eoi() callback to always unmask the interrupt - Properly handle edge interrupts on loongson-pch-pic - Let the mtk-sysirq driver advertise IRQCHIP_SKIP_SET_WAKE Link: https://lore.kernel.org/r/20210828121013.2647964-1-maz@kernel.org

genirq/msi: Move MSI sysfs handling from PCI to MSI core

2021-08-24T07:16:20Z

Move PCI's MSI sysfs code to the irq core so that other busses such as platform can reuse it. Signed-off-by: Barry Song Signed-off-by: Thomas Gleixner Acked-by: Greg Kroah-Hartman Acked-by: Bjorn Helgaas Acked-by: Marc Zyngier Link: https://lore.kernel.org/r/20210813035628.6844-2-21cnbao@gmail.com