user/sven/linux.git/kernel/irq, branch v6.13.1

genirq/proc: Add missing space separator back

2024-12-03T13:59:34Z

The recent conversion of show_interrupts() to seq_put_decimal_ull_width() caused a formatting regression as it drops a previosuly existing space separator. Add it back by unconditionally inserting a space after the interrupt counts and removing the extra leading space from the chip name prints. Fixes: f9ed1f7c2e26 ("genirq/proc: Use seq_put_decimal_ull_width() for decimal values") Reported-by: Geert Uytterhoeven Signed-off-by: Thomas Gleixner Tested-by: Geert Uytterhoeven Reviewed-by: David Wang <00107082@163.com> Link: https://lore.kernel.org/all/87zfldt5g4.ffs@tglx Closes: https://lore.kernel.org/all/4ce18851-6e9f-bbe-8319-cc5e69fb45c@linux-m68k.org

Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2024-11-19T23:54:19Z

Pull interrupt subsystem updates from Thomas Gleixner: "Tree wide: - Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. Core code: - Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. - Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. - Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. - Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. Drivers: - New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips - Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. - Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. - Small cleanups and fixes all over the place" * tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) irqchip/riscv-aplic: Prevent crash when MSI domain is missing genirq/proc: Use seq_put_decimal_ull_width() for decimal values softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT. timers: Use __raise_softirq_irqoff() to raise the softirq. hrtimer: Use __raise_softirq_irqoff() to raise the softirq riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers irqchip: Add T-HEAD C900 ACLINT SSWI driver dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK irqchip/mips-gic: Prevent indirect access to clusters without CPU cores irqchip/mips-gic: Multi-cluster support irqchip/mips-gic: Setup defaults in each cluster irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic() irqchip/mips-gic: Replace open coded online CPU iterations genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show() genirq/devres: Don't free interrupt which is not managed by devres irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool() irqchip/aspeed-intc: Add AST27XX INTC support dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC ...

genirq/proc: Use seq_put_decimal_ull_width() for decimal values

2024-11-13T16:36:35Z

seq_printf() is more expensive than seq_put_decimal_ull_width() due to the format string parsing costs. Profiling on a x86 8-core system indicates seq_printf() takes ~47% samples of show_interrupts(). Replacing it with seq_put_decimal_ull_width() yields almost 30% performance gain. [ tglx: Massaged changelog and fixed up coding style ] Signed-off-by: David Wang <00107082@163.com> Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241108160717.9547-1-00107082@163.com

genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()

2024-10-27T09:42:09Z

Remove hard-coded strings by using the str_enabled_disabled() helper function. Signed-off-by: Thorsten Blum Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241026154029.158977-2-thorsten.blum@linux.dev

genirq/msi: Fix off-by-one error in msi_domain_alloc()

2024-10-27T09:40:47Z

The error path in msi_domain_alloc(), frees the already allocated MSI interrupts in a loop, but the loop condition terminates when the index reaches zero, which fails to free the first allocated MSI interrupt at index zero. Check for >= 0 so that msi[0] is freed as well. Fixes: f3cf8bb0d6c3 ("genirq: Add generic msi irq domain support") Signed-off-by: Jinjie Ruan Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241026063639.10711-1-ruanjinjie@huawei.com

genirq/devres: Don't free interrupt which is not managed by devres

2024-10-24T09:20:06Z

If devres_destroy() does not find a matching devres entry, then devm_free_irq() emits a warning and tries to free the interrupt. That's wrong as devm_free_irq() should only undo what devm_request_irq() set up. Replace devres_destroy() with a call to devres_release() which only invokes the release function (free_irq()) in case that a matching devres entry was found. [ tglx: Massaged change log ] Signed-off-by: Zijun Hu Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241018-devres_kernel_fix-v2-1-08918ae84982@quicinc.com

genirq: Unexport nr_irqs

2024-10-16T19:56:59Z

Unexport nr_irqs and declare it static now that all code that reads or modifies nr_irqs has been converted to number_of_interrupts() / set_number_of_interrupts(). Change the type of 'nr_irqs' from 'int' into 'unsigned int' to match the return type and argument type of the irq_get_nr_iqs() / irq_set_nr_irqs() functions. Signed-off-by: Bart Van Assche Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241015190953.1266194-23-bvanassche@acm.org

genirq: Switch to irq_get_nr_irqs()

2024-10-16T19:56:59Z

Use the irq_get_nr_irqs() function instead of the global variable 'nr_irqs'. Cache the result of this function in a local variable in order not to rely on CSE (common subexpression elimination). Prepare for changing 'nr_irqs' from an exported global variable into a variable with file scope. Signed-off-by: Bart Van Assche Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241015190953.1266194-22-bvanassche@acm.org

genirq: Introduce irq_get_nr_irqs() and irq_set_nr_irqs()

2024-10-16T19:56:56Z

Prepare for changing 'nr_irqs' from an exported global variable into a variable with file scope. This will prevent accidental changes of assignments to a local variable 'nr_irqs' into assignments to the global 'nr_irqs' variable. Suppose that a patch would be submitted for review that removes a declaration of a local variable with the name 'nr_irqs' and that that patch does not remove all assignments to that local variable. Such a patch converts an assignment to a local variable into an assignment into a global variable. If the 'nr_irqs' assignment is more than three lines away from other changes, the assignment won't be included in the diff context lines and hence won't be visible without inspecting the modified file. With these abstraction series applied, such accidental conversions from assignments to a local variable into an assignment to a global variable are converted into a compilation error. Signed-off-by: Bart Van Assche Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/all/20241015190953.1266194-2-bvanassche@acm.org

Merge tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-09-23T19:47:06Z

Pull pci updates from Bjorn Helgaas: "Enumeration: - Wait for device readiness after reset by polling Vendor ID and looking for Configuration RRS instead of polling the Command register and looking for non-error completions, to avoid hardware retries done for RRS on non-Vendor ID reads (Bjorn Helgaas) - Rename CRS Completion Status to RRS ('Request Retry Status') to match PCIe r6.0 spec usage (Bjorn Helgaas) - Clear LBMS bit after a manual link retrain so we don't try to retrain a link when there's no downstream device anymore (Maciej W. Rozycki) - Revert to the original link speed after retraining fails instead of leaving it restricted to 2.5GT/s, so a future device has a chance to use higher speeds (Maciej W. Rozycki) - Wait for each level of downstream bus, not just the first, to become accessible before restoring devices on that bus (Ilpo Järvinen) - Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups without having to stomp on the core's pdev->dev.groups (Lukas Wunner) Driver binding: - Export pcim_request_region(), a managed counterpart of pci_request_region(), for use by drivers (Philipp Stanner) - Export pcim_iomap_region() and deprecate pcim_iomap_regions() (Philipp Stanner) - Request the PCI BAR used by xboxvideo (Philipp Stanner) - Request and map drm/ast BARs with pcim_iomap_region() (Philipp Stanner) MSI: - Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a single IRQ line and cannot set the affinity of each MSI to a specific CPU core (Marek Vasut) - Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity() implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3, mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl, xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed' warnings (Marek Vasut) Power management: - Add pwrctl support for ATH11K inside the WCN6855 package (Konrad Dybcio) PCI device hotplug: - Remove unnecessary hpc_ops struct from shpchp (ngn) - Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp (weiyufeng) Virtualization: - Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson) - Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS but does provide ACS-like features (Subramanian Ananthanarayanan) IOMMU: - Add function 0 DMA alias quirk for Glenfly Arise audio function, which uses the function 0 Requester ID (WangYuli) NPEM: - Add Native PCIe Enclosure Management (NPEM) support for sysfs control of NVMe RAID storage indicators (ok/fail/locate/ rebuild/etc) (Mariusz Tkaczyk) - Add support for the ACPI _DSM PCIe SSD status LED management, which is functionally similar to NPEM but mediated by platform firmware (Mariusz Tkaczyk) Device trees: - Drop minItems and maxItems from ranges in PCI generic host binding since host bridges may have several MMIO and I/O port apertures (Frank Li) - Add kirin, rcar-gen2, uniphier DT binding top-level constraints for clocks (Krzysztof Kozlowski) Altera PCIe controller driver: - Convert altera DT bindings from text to YAML (Matthew Gerlach) - Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same thing and is what other drivers use (Jinjie Ruan) Broadcom STB PCIe controller driver: - Add DT binding maxItems for reset controllers (Jim Quinlan) - Use the 'bridge' reset method if described in the DT (Jim Quinlan) - Use the 'swinit' reset method if described in the DT (Jim Quinlan) - Add 'has_phy' so the existence of a 'rescal' reset controller doesn't imply software control of it (Jim Quinlan) - Add support for many inbound DMA windows (Jim Quinlan) - Rename SoC 'type' to 'soc_base' express the fact that SoCs come in families of multiple similar devices (Jim Quinlan) - Add Broadcom 7712 DT description and driver support (Jim Quinlan) - Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for maintainability (Bjorn Helgaas) Freescale i.MX6 PCIe controller driver: - Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints (Richard Zhu) - Fix a code restructuring error that caused i.MX8MM and i.MX8MP Endpoints to fail to establish link (Richard Zhu) - Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing outbound alignment requirement (Richard Zhu) - Call phy_power_off() in the .probe() error path (Frank Li) - Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also supported (Frank Li) - Manage Refclk by using SoC-specific callbacks instead of switch statements (Frank Li) - Manage core reset by using SoC-specific callbacks instead of switch statements (Frank Li) - Expand comments for erratum ERR010728 workaround (Frank Li) - Use generic PHY APIs to configure mode, speed, and submode, which is harmless for devices that implement their own internal PHY management and don't set the generic imx_pcie->phy (Frank Li) - Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver Root Complex support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with fsl,lx2160ar2-pcie (Frank Li) - Add layerscape-pcie DT binding deprecated 'num-viewport' property to address a DT checker warning (Frank Li) - Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array (Frank Li) Loongson PCIe controller driver: - Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets (Huacai Chen) Marvell Aardvark PCIe controller driver: - Fix issue with emulating Configuration RRS for two-byte reads of Vendor ID; previously it only worked for four-byte reads (Bjorn Helgaas) MediaTek PCIe Gen3 controller driver: - Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC types (Lorenzo Bianconi) - Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi) - Add DT and driver support for Airoha EN7581 PCIe controller (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan Ansari) - Add back DT 'vddpe-3v3-supply', which was incorrectly removed earlier (Johan Hovold) - Drop endpoint redundant masking of global IRQ events (Manivannan Sadhasivam) - Clarify unknown global IRQ message and only log it once to avoid a flood (Manivannan Sadhasivam) - Add 'linux,pci-domain' property to endpoint DT binding (Manivannan Sadhasivam) - Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam) - Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint controller (Manivannan Sadhasivam) - Add global SPI interrupt for PCIe link events to DT binding (Manivannan Sadhasivam) - Add global RC interrupt handler to handle 'Link up' events and automatically enumerate hot-added devices (Manivannan Sadhasivam) - Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR MMIO space (Prudhvi Yarlagadda) - Enable controller resources like PHY only after PERST# is deasserted to partially avoid the problem that the endpoint SoC crashes when accessing things when Refclk is absent (Manivannan Sadhasivam) - Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu Chinta Venkata) - Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a NULL pointer dereference (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - Make the read-only const array 'check_addr' static (Colin Ian King) - Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding (Yoshihiro Shimoda) TI DRA7xx PCIe controller driver: - Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary handler is NULL (Siddharth Vadapalli) - Handle IRQ request errors during root port and endpoint probe (Siddharth Vadapalli) TI J721E PCIe driver: - Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable the ACSPCIE module to drive Refclk for the Endpoint (Siddharth Vadapalli) - Extract the cadence link setup from cdns_pcie_host_setup() so link setup can be done separately during resume (Thomas Richard) - Add T_PERST_CLK_US definition for the mandatory delay between Refclk becoming stable and PERST# being deasserted (Thomas Richard) - Add j721e suspend and resume support (Théo Lebrun) TI Keystone PCIe controller driver: - Fix NULL pointer checking when applying MRRS limitation quirk for AM65x SR 1.0 Errata #i2037 (Dan Carpenter) Xilinx NWL PCIe controller driver: - Fix off-by-one error in INTx IRQ handler that caused INTx interrupts to be lost or delivered as the wrong interrupt (Sean Anderson) - Rate-limit misc interrupt messages (Sean Anderson) - Turn off the clock on probe failure and device removal (Sean Anderson) - Add DT binding and driver support for enabling/disabling PHYs (Sean Anderson) - Add PCIe phy bindings for the ZCU102 (Sean Anderson) Xilinx XDMA PCIe controller driver: - Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT binding and xilinx-dma-pl driver (Thippeswamy Havalige) Miscellaneous: - Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina) - Fix minor kerneldoc issues and typos (Bjorn Helgaas) - Use PCI_DEVID() macro in aer_inject() instead of open-coding it (Jinjie Ruan) - Check pcie_find_root_port() return in x86 fixups to avoid NULL pointer dereferences (Samasth Norway Ananda) - Make pci_bus_type constant (Kunwu Chan) - Remove unused declarations of __pci_pme_wakeup() and pci_vpd_release() (Yue Haibing) - Remove any leftover .*.cmd files with make clean (zhang jiao) - Remove unused BILLION macro (zhang jiao)" * tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits) PCI: Fix typos dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again tools: PCI: Remove unused BILLION macro tools: PCI: Remove .*.cmd files with make clean PCI: Pass domain number to pci_bus_release_domain_nr() explicitly PCI: dra7xx: Fix error handling when IRQ request fails in probe PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ PCI: qcom: Add RX lane margining settings for 16.0 GT/s PCI: qcom: Add equalization settings for 16.0 GT/s PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed' PCI: qcom-ep: Enable controller resources like PHY only after refclk is available PCI: Mark Creative Labs EMU20k2 INTx masking as broken dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint dt-bindings: PCI: altera: msi: Convert to YAML PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support PCI: Rename CRS Completion Status to RRS PCI: aardvark: Correct Configuration RRS checking PCI: Wait for device readiness with Configuration RRS PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings ...