<feed xmlns='http://www.w3.org/2005/Atom'>
<title>user/sven/linux.git/kernel/module, branch v6.2.8</title>
<subtitle>Linux Kernel
</subtitle>
<id>https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v6.2.8</id>
<link rel='self' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v6.2.8'/>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/'/>
<updated>2023-01-24T20:52:52Z</updated>
<entry>
<title>module: Don't wait for GOING modules</title>
<updated>2023-01-24T20:52:52Z</updated>
<author>
<name>Petr Pavlu</name>
<email>petr.pavlu@suse.com</email>
</author>
<published>2022-12-05T10:35:57Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=0254127ab977e70798707a7a2b757c9f3c971210'/>
<id>urn:sha1:0254127ab977e70798707a7a2b757c9f3c971210</id>
<content type='text'>
During a system boot, it can happen that the kernel receives a burst of
requests to insert the same module but loading it eventually fails
during its init call. For instance, udev can make a request to insert
a frequency module for each individual CPU when another frequency module
is already loaded which causes the init function of the new module to
return an error.

Since commit 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for
modules that have finished loading"), the kernel waits for modules in
MODULE_STATE_GOING state to finish unloading before making another
attempt to load the same module.

This creates unnecessary work in the described scenario and delays the
boot. In the worst case, it can prevent udev from loading drivers for
other devices and might cause timeouts of services waiting on them and
subsequently a failed boot.

This patch attempts a different solution for the problem 6e6de3dee51a
was trying to solve. Rather than waiting for the unloading to complete,
it returns a different error code (-EBUSY) for modules in the GOING
state. This should avoid the error situation that was described in
6e6de3dee51a (user space attempting to load a dependent module because
the -EEXIST error code would suggest to user space that the first module
had been loaded successfully), while avoiding the delay situation too.

This has been tested on linux-next since December 2022 and passes
all kmod selftests except test 0009 with module compression enabled
but it has been confirmed that this issue has existed and has gone
unnoticed since prior to this commit and can also be reproduced without
module compression with a simple usleep(5000000) on tools/modprobe.c [0].
These failures are caused by hitting the kernel mod_concurrent_max and can
happen either due to a self inflicted kernel module auto-loead DoS somehow
or on a system with large CPU count and each CPU count incorrectly triggering
many module auto-loads. Both of those issues need to be fixed in-kernel.

[0] https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/

Fixes: 6e6de3dee51a ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Co-developed-by: Martin Wilck &lt;mwilck@suse.com&gt;
Signed-off-by: Martin Wilck &lt;mwilck@suse.com&gt;
Signed-off-by: Petr Pavlu &lt;petr.pavlu@suse.com&gt;
Cc: stable@vger.kernel.org
Reviewed-by: Petr Mladek &lt;pmladek@suse.com&gt;
[mcgrof: enhance commit log with testing and kmod test result interpretation ]
Signed-off-by: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
</content>
</entry>
<entry>
<title>Merge tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux</title>
<updated>2022-12-19T13:13:33Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2022-12-19T13:13:33Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=5f6e430f931d245da838db3e10e918681207029b'/>
<id>urn:sha1:5f6e430f931d245da838db3e10e918681207029b</id>
<content type='text'>
Pull powerpc updates from Michael Ellerman:

 - Add powerpc qspinlock implementation optimised for large system
   scalability and paravirt. See the merge message for more details

 - Enable objtool to be built on powerpc to generate mcount locations

 - Use a temporary mm for code patching with the Radix MMU, so the
   writable mapping is restricted to the patching CPU

 - Add an option to build the 64-bit big-endian kernel with the ELFv2
   ABI

 - Sanitise user registers on interrupt entry on 64-bit Book3S

 - Many other small features and fixes

Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.

* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
  powerpc/code-patching: Fix oops with DEBUG_VM enabled
  powerpc/qspinlock: Fix 32-bit build
  powerpc/prom: Fix 32-bit build
  powerpc/rtas: mandate RTAS syscall filtering
  powerpc/rtas: define pr_fmt and convert printk call sites
  powerpc/rtas: clean up includes
  powerpc/rtas: clean up rtas_error_log_max initialization
  powerpc/pseries/eeh: use correct API for error log size
  powerpc/rtas: avoid scheduling in rtas_os_term()
  powerpc/rtas: avoid device tree lookups in rtas_os_term()
  powerpc/rtasd: use correct OF API for event scan rate
  powerpc/rtas: document rtas_call()
  powerpc/pseries: unregister VPA when hot unplugging a CPU
  powerpc/pseries: reset the RCU watchdogs after a LPM
  powerpc: Take in account addition CPU node when building kexec FDT
  powerpc: export the CPU node count
  powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
  powerpc/dts/fsl: Fix pca954x i2c-mux node names
  cxl: Remove unnecessary cxl_pci_window_alignment()
  selftests/powerpc: Fix resource leaks
  ...
</content>
</entry>
<entry>
<title>Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next</title>
<updated>2022-12-13T23:47:48Z</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2022-12-13T23:47:48Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=7e68dd7d07a28faa2e6574dd6b9dbd90cdeaae91'/>
<id>urn:sha1:7e68dd7d07a28faa2e6574dd6b9dbd90cdeaae91</id>
<content type='text'>
Pull networking updates from Paolo Abeni:
 "Core:

   - Allow live renaming when an interface is up

   - Add retpoline wrappers for tc, improving considerably the
     performances of complex queue discipline configurations

   - Add inet drop monitor support

   - A few GRO performance improvements

   - Add infrastructure for atomic dev stats, addressing long standing
     data races

   - De-duplicate common code between OVS and conntrack offloading
     infrastructure

   - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements

   - Netfilter: introduce packet parser for tunneled packets

   - Replace IPVS timer-based estimators with kthreads to scale up the
     workload with the number of available CPUs

   - Add the helper support for connection-tracking OVS offload

  BPF:

   - Support for user defined BPF objects: the use case is to allocate
     own objects, build own object hierarchies and use the building
     blocks to build own data structures flexibly, for example, linked
     lists in BPF

   - Make cgroup local storage available to non-cgroup attached BPF
     programs

   - Avoid unnecessary deadlock detection and failures wrt BPF task
     storage helpers

   - A relevant bunch of BPF verifier fixes and improvements

   - Veristat tool improvements to support custom filtering, sorting,
     and replay of results

   - Add LLVM disassembler as default library for dumping JITed code

   - Lots of new BPF documentation for various BPF maps

   - Add bpf_rcu_read_{,un}lock() support for sleepable programs

   - Add RCU grace period chaining to BPF to wait for the completion of
     access from both sleepable and non-sleepable BPF programs

   - Add support storing struct task_struct objects as kptrs in maps

   - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer
     values

   - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions

  Protocols:

   - TCP: implement Protective Load Balancing across switch links

   - TCP: allow dynamically disabling TCP-MD5 static key, reverting back
     to fast[er]-path

   - UDP: Introduce optional per-netns hash lookup table

   - IPv6: simplify and cleanup sockets disposal

   - Netlink: support different type policies for each generic netlink
     operation

   - MPTCP: add MSG_FASTOPEN and FastOpen listener side support

   - MPTCP: add netlink notification support for listener sockets events

   - SCTP: add VRF support, allowing sctp sockets binding to VRF devices

   - Add bridging MAC Authentication Bypass (MAB) support

   - Extensions for Ethernet VPN bridging implementation to better
     support multicast scenarios

   - More work for Wi-Fi 7 support, comprising conversion of all the
     existing drivers to internal TX queue usage

   - IPSec: introduce a new offload type (packet offload) allowing
     complete header processing and crypto offloading

   - IPSec: extended ack support for more descriptive XFRM error
     reporting

   - RXRPC: increase SACK table size and move processing into a
     per-local endpoint kernel thread, reducing considerably the
     required locking

   - IEEE 802154: synchronous send frame and extended filtering support,
     initial support for scanning available 15.4 networks

   - Tun: bump the link speed from 10Mbps to 10Gbps

   - Tun/VirtioNet: implement UDP segmentation offload support

  Driver API:

   - PHY/SFP: improve power level switching between standard level 1 and
     the higher power levels

   - New API for netdev &lt;-&gt; devlink_port linkage

   - PTP: convert existing drivers to new frequency adjustment
     implementation

   - DSA: add support for rx offloading

   - Autoload DSA tagging driver when dynamically changing protocol

   - Add new PCP and APPTRUST attributes to Data Center Bridging

   - Add configuration support for 800Gbps link speed

   - Add devlink port function attribute to enable/disable RoCE and
     migratable

   - Extend devlink-rate to support strict prioriry and weighted fair
     queuing

   - Add devlink support to directly reading from region memory

   - New device tree helper to fetch MAC address from nvmem

   - New big TCP helper to simplify temporary header stripping

  New hardware / drivers:

   - Ethernet:
      - Marvel Octeon CNF95N and CN10KB Ethernet Switches
      - Marvel Prestera AC5X Ethernet Switch
      - WangXun 10 Gigabit NIC
      - Motorcomm yt8521 Gigabit Ethernet
      - Microchip ksz9563 Gigabit Ethernet Switch
      - Microsoft Azure Network Adapter
      - Linux Automation 10Base-T1L adapter

   - PHY:
      - Aquantia AQR112 and AQR412
      - Motorcomm YT8531S

   - PTP:
      - Orolia ART-CARD

   - WiFi:
      - MediaTek Wi-Fi 7 (802.11be) devices
      - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB
        devices

   - Bluetooth:
      - Broadcom BCM4377/4378/4387 Bluetooth chipsets
      - Realtek RTL8852BE and RTL8723DS
      - Cypress.CYW4373A0 WiFi + Bluetooth combo device

  Drivers:

   - CAN:
      - gs_usb: bus error reporting support
      - kvaser_usb: listen only and bus error reporting support

   - Ethernet NICs:
      - Intel (100G):
         - extend action skbedit to RX queue mapping
         - implement devlink-rate support
         - support direct read from memory
      - nVidia/Mellanox (mlx5):
         - SW steering improvements, increasing rules update rate
         - Support for enhanced events compression
         - extend H/W offload packet manipulation capabilities
         - implement IPSec packet offload mode
      - nVidia/Mellanox (mlx4):
         - better big TCP support
      - Netronome Ethernet NICs (nfp):
         - IPsec offload support
         - add support for multicast filter
      - Broadcom:
         - RSS and PTP support improvements
      - AMD/SolarFlare:
         - netlink extened ack improvements
         - add basic flower matches to offload, and related stats
      - Virtual NICs:
         - ibmvnic: introduce affinity hint support
      - small / embedded:
         - FreeScale fec: add initial XDP support
         - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood
         - TI am65-cpsw: add suspend/resume support
         - Mediatek MT7986: add RX wireless wthernet dispatch support
         - Realtek 8169: enable GRO software interrupt coalescing per
           default

   - Ethernet high-speed switches:
      - Microchip (sparx5):
         - add support for Sparx5 TC/flower H/W offload via VCAP
      - Mellanox mlxsw:
         - add 802.1X and MAC Authentication Bypass offload support
         - add ip6gre support

   - Embedded Ethernet switches:
      - Mediatek (mtk_eth_soc):
         - improve PCS implementation, add DSA untag support
         - enable flow offload support
      - Renesas:
         - add rswitch R-Car Gen4 gPTP support
      - Microchip (lan966x):
         - add full XDP support
         - add TC H/W offload via VCAP
         - enable PTP on bridge interfaces
      - Microchip (ksz8):
         - add MTU support for KSZ8 series

   - Qualcomm 802.11ax WiFi (ath11k):
      - support configuring channel dwell time during scan

   - MediaTek WiFi (mt76):
      - enable Wireless Ethernet Dispatch (WED) offload support
      - add ack signal support
      - enable coredump support
      - remain_on_channel support

   - Intel WiFi (iwlwifi):
      - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
      - 320 MHz channels support

   - RealTek WiFi (rtw89):
      - new dynamic header firmware format support
      - wake-over-WLAN support"

* tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits)
  ipvs: fix type warning in do_div() on 32 bit
  net: lan966x: Remove a useless test in lan966x_ptp_add_trap()
  net: ipa: add IPA v4.7 support
  dt-bindings: net: qcom,ipa: Add SM6350 compatible
  bnxt: Use generic HBH removal helper in tx path
  IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver
  selftests: forwarding: Add bridge MDB test
  selftests: forwarding: Rename bridge_mdb test
  bridge: mcast: Support replacement of MDB port group entries
  bridge: mcast: Allow user space to specify MDB entry routing protocol
  bridge: mcast: Allow user space to add (*, G) with a source list and filter mode
  bridge: mcast: Add support for (*, G) with a source list and filter mode
  bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source
  bridge: mcast: Add a flag for user installed source entries
  bridge: mcast: Expose __br_multicast_del_group_src()
  bridge: mcast: Expose br_multicast_new_group_src()
  bridge: mcast: Add a centralized error path
  bridge: mcast: Place netlink policy before validation functions
  bridge: mcast: Split (*, G) and (S, G) addition into different functions
  bridge: mcast: Do not derive entry type from its filter mode
  ...
</content>
</entry>
<entry>
<title>module/decompress: Support zstd in-kernel decompression</title>
<updated>2022-12-07T20:05:05Z</updated>
<author>
<name>Stephen Boyd</name>
<email>swboyd@chromium.org</email>
</author>
<published>2022-12-06T21:53:18Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=169a58ad824d896b9e291a27193342616e651b82'/>
<id>urn:sha1:169a58ad824d896b9e291a27193342616e651b82</id>
<content type='text'>
Add support for zstd compressed modules to the in-kernel decompression
code. This allows zstd compressed modules to be decompressed by the
kernel, similar to the existing support for gzip and xz compressed
modules.

Cc: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Cc: Piotr Gorski &lt;lucjan.lucjanov@gmail.com&gt;
Cc: Nick Terrell &lt;terrelln@fb.com&gt;
Signed-off-by: Stephen Boyd &lt;swboyd@chromium.org&gt;
Reviewed-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Reviewed-by: Piotr Gorski &lt;lucjan.lucjanov@gmail.com&gt;
Signed-off-by: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
</content>
</entry>
<entry>
<title>module: add module_elf_check_arch for module-specific checks</title>
<updated>2022-12-02T06:54:07Z</updated>
<author>
<name>Nicholas Piggin</name>
<email>npiggin@gmail.com</email>
</author>
<published>2022-11-28T04:15:36Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=f9231a996e229c13d23f907352c2cea84bd1c30a'/>
<id>urn:sha1:f9231a996e229c13d23f907352c2cea84bd1c30a</id>
<content type='text'>
The elf_check_arch() function is also used to test compatibility of
usermode binaries. Kernel modules may have more specific requirements,
for example powerpc would like to test for ABI version compatibility.

Add a weak module_elf_check_arch() that defaults to true, and call it
from elf_validity_check().

Signed-off-by: Jessica Yu &lt;jeyu@kernel.org&gt;
[np: added changelog, adjust name, rebase]
Acked-by: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
Signed-off-by: Nicholas Piggin &lt;npiggin@gmail.com&gt;
Reviewed-by: Joel Stanley &lt;joel@jms.id.au&gt;
Signed-off-by: Michael Ellerman &lt;mpe@ellerman.id.au&gt;
Link: https://lore.kernel.org/r/20221128041539.1742489-2-npiggin@gmail.com

</content>
</entry>
<entry>
<title>module: Fix NULL vs IS_ERR checking for module_get_next_page</title>
<updated>2022-11-11T18:19:52Z</updated>
<author>
<name>Miaoqian Lin</name>
<email>linmq006@gmail.com</email>
</author>
<published>2022-11-10T02:58:34Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=45af1d7aae7d5520d2858f8517a1342646f015db'/>
<id>urn:sha1:45af1d7aae7d5520d2858f8517a1342646f015db</id>
<content type='text'>
The module_get_next_page() function return error pointers on error
instead of NULL.
Use IS_ERR() to check the return value to fix this.

Fixes: b1ae6dc41eaa ("module: add in-kernel support for decompressing")
Signed-off-by: Miaoqian Lin &lt;linmq006@gmail.com&gt;
Reviewed-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com
Signed-off-by: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
</content>
</entry>
<entry>
<title>module: Remove unused macros module_addr_min/max</title>
<updated>2022-11-11T18:19:52Z</updated>
<author>
<name>Chen Zhongjin</name>
<email>chenzhongjin@huawei.com</email>
</author>
<published>2022-09-24T07:22:16Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=89a6b5917650edd1542194fd5b5ada64fb94a790'/>
<id>urn:sha1:89a6b5917650edd1542194fd5b5ada64fb94a790</id>
<content type='text'>
Unused macros reported by [-Wunused-macros].

These macros are introduced to record the bound address of modules.

Commit 80b8bf436990 ("module: Always have struct mod_tree_root") made
"struct mod_tree_root" always present and its members addr_min and
addr_max can be directly accessed.

Macros module_addr_min and module_addr_min are not used anymore, so remove
them.

Signed-off-by: Chen Zhongjin &lt;chenzhongjin@huawei.com&gt;
Reviewed-by: Miroslav Benes &lt;mbenes@suse.cz&gt;
Reviewed-by: Christophe Leroy &lt;christophe.leroy@csgroup.eu&gt;
[mcgrof: massaged the commit messsage as suggested by Miroslav]
Signed-off-by: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
</content>
</entry>
<entry>
<title>module: remove redundant module_sysfs_initialized variable</title>
<updated>2022-11-11T18:19:52Z</updated>
<author>
<name>Rasmus Villemoes</name>
<email>linux@rasmusvillemoes.dk</email>
</author>
<published>2022-09-29T12:10:39Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=3cd60866d46050d14734cbbac41b00c8d3e51d61'/>
<id>urn:sha1:3cd60866d46050d14734cbbac41b00c8d3e51d61</id>
<content type='text'>
The variable module_sysfs_initialized is used for checking whether
module_kset has been initialized. Checking module_kset itself works
just fine for that.

This is a leftover from commit 7405c1e15edf ("kset: convert /sys/module
to use kset_create").

Signed-off-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Reviewed-by: Miroslav Benes &lt;mbenes@suse.cz&gt;
[mcgrof: adjusted commit log as suggested by Christophe Leroy]
Signed-off-by: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
</content>
</entry>
<entry>
<title>kallsyms: Make module_kallsyms_on_each_symbol generally available</title>
<updated>2022-10-25T17:14:50Z</updated>
<author>
<name>Jiri Olsa</name>
<email>jolsa@kernel.org</email>
</author>
<published>2022-10-25T13:41:41Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=73feb8d5fa3b755bb51077c0aabfb6aa556fd498'/>
<id>urn:sha1:73feb8d5fa3b755bb51077c0aabfb6aa556fd498</id>
<content type='text'>
Making module_kallsyms_on_each_symbol generally available, so it
can be used outside CONFIG_LIVEPATCH option in following changes.

Rather than adding another ifdef option let's make the function
generally available (when CONFIG_KALLSYMS and CONFIG_MODULES
options are defined).

Cc: Christoph Hellwig &lt;hch@lst.de&gt;
Acked-by: Song Liu &lt;song@kernel.org&gt;
Signed-off-by: Jiri Olsa &lt;jolsa@kernel.org&gt;
Link: https://lore.kernel.org/r/20221025134148.3300700-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
</content>
</entry>
<entry>
<title>module: tracking: Keep a record of tainted unloaded modules only</title>
<updated>2022-10-10T19:16:19Z</updated>
<author>
<name>Aaron Tomlin</name>
<email>atomlin@redhat.com</email>
</author>
<published>2022-10-07T13:38:12Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=47cc75aa92837a9d3f15157d6272ff285585d75d'/>
<id>urn:sha1:47cc75aa92837a9d3f15157d6272ff285585d75d</id>
<content type='text'>
This ensures that no module record/or entry is added to the
unloaded_tainted_modules list if it does not carry a taint.

Reported-by: Alexey Dobriyan &lt;adobriyan@gmail.com&gt;
Fixes: 99bd9956551b ("module: Introduce module unload taint tracking")
Signed-off-by: Aaron Tomlin &lt;atomlin@redhat.com&gt;
Acked-by: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
</entry>
</feed>
