user/sven/linux.git/kernel/panic.c, branch leds/master

kernel/panic/kexec: fix "crash_kexec_post_notifiers" option issue in oops path

2015-07-01T02:44:57Z

Commit f06e5153f4ae2e ("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers") introduced "crash_kexec_post_notifiers" kernel boot option, which toggles wheather panic() calls crash_kexec() before panic_notifiers and dump kmsg or after. The problem is that the commit overlooks panic_on_oops kernel boot option. If it is enabled, crash_kexec() is called directly without going through panic() in oops path. To fix this issue, this patch adds a check to "crash_kexec_post_notifiers" in the condition of kexec_should_crash(). Also, put a comment in kexec_should_crash() to explain not obvious things on this patch. Signed-off-by: HATAYAMA Daisuke Acked-by: Baoquan He Tested-by: Hidehiro Kawai Reviewed-by: Masami Hiramatsu Cc: Vivek Goyal Cc: Ingo Molnar Cc: Hidehiro Kawai Cc: Baoquan He Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kernel/panic: call the 2nd crash_kexec() only if crash_kexec_post_notifiers is enabled

2015-07-01T02:44:57Z

For compatibility with the behaviour before the commit f06e5153f4ae2e ("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers"), the 2nd crash_kexec() should be called only if crash_kexec_post_notifiers is enabled. Note that crash_kexec() returns immediately if kdump crash kernel is not loaded, so in this case, this patch makes no functionality change, but the point is to make it explicit, from the caller panic() side, that the 2nd crash_kexec() does nothing. Signed-off-by: HATAYAMA Daisuke Suggested-by: Ingo Molnar Cc: "Eric W. Biederman" Cc: Vivek Goyal Cc: Masami Hiramatsu Cc: Hidehiro Kawai Cc: Baoquan He Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

livepatch: kernel: add TAINT_LIVEPATCH

2014-12-22T14:40:48Z

This adds a new taint flag to indicate when the kernel or a kernel module has been live patched. This will provide a clean indication in bug reports that live patching was used. Additionally, if the crash occurs in a live patched function, the live patch module will appear beside the patched function in the backtrace. Signed-off-by: Seth Jennings Acked-by: Josh Poimboeuf Reviewed-by: Miroslav Benes Reviewed-by: Petr Mladek Reviewed-by: Masami Hiramatsu Signed-off-by: Jiri Kosina

kernel: add panic_on_warn

2014-12-11T01:41:10Z

There have been several times where I have had to rebuild a kernel to cause a panic when hitting a WARN() in the code in order to get a crash dump from a system. Sometimes this is easy to do, other times (such as in the case of a remote admin) it is not trivial to send new images to the user. A much easier method would be a switch to change the WARN() over to a panic. This makes debugging easier in that I can now test the actual image the WARN() was seen on and I do not have to engage in remote debugging. This patch adds a panic_on_warn kernel parameter and /proc/sys/kernel/panic_on_warn calls panic() in the warn_slowpath_common() path. The function will still print out the location of the warning. An example of the panic_on_warn output: The first line below is from the WARN_ON() to output the WARN_ON()'s location. After that the panic() output is displayed. WARNING: CPU: 30 PID: 11698 at /home/prarit/dummy_module/dummy-module.c:25 init_dummy+0x1f/0x30 [dummy_module]() Kernel panic - not syncing: panic_on_warn set ... CPU: 30 PID: 11698 Comm: insmod Tainted: G W OE 3.17.0+ #57 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013 0000000000000000 000000008e3f87df ffff88080f093c38 ffffffff81665190 0000000000000000 ffffffff818aea3d ffff88080f093cb8 ffffffff8165e2ec ffffffff00000008 ffff88080f093cc8 ffff88080f093c68 000000008e3f87df Call Trace: [] dump_stack+0x46/0x58 [] panic+0xd0/0x204 [] ? init_dummy+0x1f/0x30 [dummy_module] [] warn_slowpath_common+0xd0/0xd0 [] ? dummy_greetings+0x40/0x40 [dummy_module] [] warn_slowpath_null+0x1a/0x20 [] init_dummy+0x1f/0x30 [dummy_module] [] do_one_initcall+0xd4/0x210 [] ? __vunmap+0xc2/0x110 [] load_module+0x16a9/0x1b30 [] ? store_uevent+0x70/0x70 [] ? copy_module_from_fd.isra.44+0x129/0x180 [] SyS_finit_module+0xa6/0xd0 [] system_call_fastpath+0x12/0x17 Successfully tested by me. hpa said: There is another very valid use for this: many operators would rather a machine shuts down than being potentially compromised either functionally or security-wise. Signed-off-by: Prarit Bhargava Cc: Jonathan Corbet Cc: Rusty Russell Cc: "H. Peter Anvin" Cc: Andi Kleen Cc: Masami Hiramatsu Acked-by: Yasuaki Ishimatsu Cc: Fabian Frederick Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kernel/panic.c: update comments for print_tainted

2014-11-14T00:17:06Z

Commit 69361eef9056 ("panic: add TAINT_SOFTLOCKUP") added the 'L' flag, but failed to update the comments for print_tainted(). So, update the comments. Signed-off-by: Xie XiuQi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

panic: add TAINT_SOFTLOCKUP

2014-08-08T22:57:24Z

This taint flag will be set if the system has ever entered a softlockup state. Similar to TAINT_WARN it is useful to know whether or not the system has been in a softlockup state when debugging. [akpm@linux-foundation.org: apply the taint before calling panic()] Signed-off-by: Josh Hunt Cc: Jason Baron Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers

2014-06-06T23:08:12Z

Add a "crash_kexec_post_notifiers" boot option to run kdump after running panic_notifiers and dump kmsg. This can help rare situations where kdump fails because of unstable crashed kernel or hardware failure (memory corruption on critical data/code), or the 2nd kernel is already broken by the 1st kernel (it's a broken behavior, but who can guarantee that the "crashed" kernel works correctly?). Usage: add "crash_kexec_post_notifiers" to kernel boot option. Note that this actually increases risks of the failure of kdump. This option should be set only if you worry about the rare case of kdump failure rather than increasing the chance of success. Signed-off-by: Masami Hiramatsu Acked-by: Motohiro Kosaki Acked-by: Vivek Goyal Cc: Eric Biederman Cc: Yoshihiro YUNOMAE Cc: Satoru MORIYA Cc: Tomoki Sekiyama Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kernel/panic.c: display reason at end + pr_emerg

2014-04-07T23:36:08Z

Currently, booting without initrd specified on 80x25 screen gives a call trace followed by atkbd : Spurious ACK. Original message ("VFS: Unable to mount root fs") is not available. Of course this could happen in other situations... This patch displays panic reason after call trace which could help lot of people even if it's not the very last line on screen. Also, convert all panic.c printk(KERN_EMERG to pr_emerg( [akpm@linux-foundation.org: missed a couple of pr_ conversions] Signed-off-by: Fabian Frederick Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

2014-04-06T16:38:07Z

Pull module updates from Rusty Russell: "Nothing major: the stricter permissions checking for sysfs broke a staging driver; fix included. Greg KH said he'd take the patch but hadn't as the merge window opened, so it's included here to avoid breaking build" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: staging: fix up speakup kobject mode Use 'E' instead of 'X' for unsigned module taint flag. VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms. kallsyms: fix percpu vars on x86-64 with relocation. kallsyms: generalize address range checking module: LLVMLinux: Remove unused function warning from __param_check macro Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE module: remove MODULE_GENERIC_TABLE module: allow multiple calls to MODULE_DEVICE_TABLE() per module module: use pr_cont

Merge branch 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2014-03-31T21:13:25Z

Pull x86 LTO changes from Peter Anvin: "More infrastructure work in preparation for link-time optimization (LTO). Most of these changes is to make sure symbols accessed from assembly code are properly marked as visible so the linker doesn't remove them. My understanding is that the changes to support LTO are still not upstream in binutils, but are on the way there. This patchset should conclude the x86-specific changes, and remaining patches to actually enable LTO will be fed through the Kbuild tree (other than keeping up with changes to the x86 code base, of course), although not necessarily in this merge window" * 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) Kbuild, lto: Handle basic LTO in modpost Kbuild, lto: Disable LTO for asm-offsets.c Kbuild, lto: Add a gcc-ld script to let run gcc as ld Kbuild, lto: add ld-version and ld-ifversion macros Kbuild, lto: Drop .number postfixes in modpost Kbuild, lto, workaround: Don't warn for initcall_reference in modpost lto: Disable LTO for sys_ni lto: Handle LTO common symbols in module loader lto, workaround: Add workaround for initcall reordering lto: Make asmlinkage __visible x86, lto: Disable LTO for the x86 VDSO initconst, x86: Fix initconst mistake in ts5500 code initconst: Fix initconst mistake in dcdbas asmlinkage: Make trace_hardirqs_on/off_caller visible asmlinkage, x86: Fix 32bit memcpy for LTO asmlinkage Make __stack_chk_failed and memcmp visible asmlinkage: Mark rwsem functions that can be called from assembler asmlinkage asmlinkage: Make main_extable_sort_needed visible asmlinkage, mutex: Mark __visible asmlinkage: Make trace_hardirq visible ...