user/sven/linux.git/kernel/panic.c, branch v4.4.2

printk: do cond_resched() between lines while outputting to consoles

2016-02-17T20:30:57Z

commit 8d91f8b15361dfb438ab6eb3b319e2ded43458ff upstream. @console_may_schedule tracks whether console_sem was acquired through lock or trylock. If the former, we're inside a sleepable context and console_conditional_schedule() performs cond_resched(). This allows console drivers which use console_lock for synchronization to yield while performing time-consuming operations such as scrolling. However, the actual console outputting is performed while holding irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule before starting outputting lines. Also, only a few drivers call console_conditional_schedule() to begin with. This means that when a lot of lines need to be output by console_unlock(), for example on a console registration, the task doing console_unlock() may not yield for a long time on a non-preemptible kernel. If this happens with a slow console devices, for example a serial console, the outputting task may occupy the cpu for a very long time. Long enough to trigger softlockup and/or RCU stall warnings, which in turn pile more messages, sometimes enough to trigger the next cycle of warnings incapacitating the system. Fix it by making console_unlock() insert cond_resched() between lines if @console_may_schedule. Signed-off-by: Tejun Heo Reported-by: Calvin Owens Acked-by: Jan Kara Cc: Dave Jones Cc: Kyle McMartin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

kernel/panic.c: turn off locks debug before releasing console lock

2015-11-21T00:17:32Z

Commit 08d78658f393 ("panic: release stale console lock to always get the logbuf printed out") introduced an unwanted bad unlock balance report when panic() is called directly and not from OOPS (e.g. from out_of_memory()). The difference is that in case of OOPS we disable locks debug in oops_enter() and on direct panic call nobody does that. Fixes: 08d78658f393 ("panic: release stale console lock to always get the logbuf printed out") Reported-by: kernel test robot Signed-off-by: Vitaly Kuznetsov Cc: HATAYAMA Daisuke Cc: Masami Hiramatsu Cc: Jiri Kosina Cc: Baoquan He Cc: Prarit Bhargava Cc: Xie XiuQi Cc: Seth Jennings Cc: "K. Y. Srinivasan" Cc: Jan Kara Cc: Petr Mladek Cc: Yasuaki Ishimatsu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

panic: release stale console lock to always get the logbuf printed out

2015-11-07T01:50:42Z

In some cases we may end up killing the CPU holding the console lock while still having valuable data in logbuf. E.g. I'm observing the following: - A crash is happening on one CPU and console_unlock() is being called on some other. - console_unlock() tries to print out the buffer before releasing the lock and on slow console it takes time. - in the meanwhile crashing CPU does lots of printk()-s with valuable data (which go to the logbuf) and sends IPIs to all other CPUs. - console_unlock() finishes printing previous chunk and enables interrupts before trying to print out the rest, the CPU catches the IPI and never releases console lock. This is not the only possible case: in VT/fb subsystems we have many other console_lock()/console_unlock() users. Non-masked interrupts (or receiving NMI in case of extreme slowness) will have the same result. Getting the whole console buffer printed out on crash should be top priority. [akpm@linux-foundation.org: tweak comment text] Signed-off-by: Vitaly Kuznetsov Cc: HATAYAMA Daisuke Cc: Masami Hiramatsu Cc: Jiri Kosina Cc: Baoquan He Cc: Prarit Bhargava Cc: Xie XiuQi Cc: Seth Jennings Cc: "K. Y. Srinivasan" Cc: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kernel/panic/kexec: fix "crash_kexec_post_notifiers" option issue in oops path

2015-07-01T02:44:57Z

Commit f06e5153f4ae2e ("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers") introduced "crash_kexec_post_notifiers" kernel boot option, which toggles wheather panic() calls crash_kexec() before panic_notifiers and dump kmsg or after. The problem is that the commit overlooks panic_on_oops kernel boot option. If it is enabled, crash_kexec() is called directly without going through panic() in oops path. To fix this issue, this patch adds a check to "crash_kexec_post_notifiers" in the condition of kexec_should_crash(). Also, put a comment in kexec_should_crash() to explain not obvious things on this patch. Signed-off-by: HATAYAMA Daisuke Acked-by: Baoquan He Tested-by: Hidehiro Kawai Reviewed-by: Masami Hiramatsu Cc: Vivek Goyal Cc: Ingo Molnar Cc: Hidehiro Kawai Cc: Baoquan He Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kernel/panic: call the 2nd crash_kexec() only if crash_kexec_post_notifiers is enabled

2015-07-01T02:44:57Z

For compatibility with the behaviour before the commit f06e5153f4ae2e ("kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers"), the 2nd crash_kexec() should be called only if crash_kexec_post_notifiers is enabled. Note that crash_kexec() returns immediately if kdump crash kernel is not loaded, so in this case, this patch makes no functionality change, but the point is to make it explicit, from the caller panic() side, that the 2nd crash_kexec() does nothing. Signed-off-by: HATAYAMA Daisuke Suggested-by: Ingo Molnar Cc: "Eric W. Biederman" Cc: Vivek Goyal Cc: Masami Hiramatsu Cc: Hidehiro Kawai Cc: Baoquan He Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

livepatch: kernel: add TAINT_LIVEPATCH

2014-12-22T14:40:48Z

This adds a new taint flag to indicate when the kernel or a kernel module has been live patched. This will provide a clean indication in bug reports that live patching was used. Additionally, if the crash occurs in a live patched function, the live patch module will appear beside the patched function in the backtrace. Signed-off-by: Seth Jennings Acked-by: Josh Poimboeuf Reviewed-by: Miroslav Benes Reviewed-by: Petr Mladek Reviewed-by: Masami Hiramatsu Signed-off-by: Jiri Kosina

kernel: add panic_on_warn

2014-12-11T01:41:10Z

There have been several times where I have had to rebuild a kernel to cause a panic when hitting a WARN() in the code in order to get a crash dump from a system. Sometimes this is easy to do, other times (such as in the case of a remote admin) it is not trivial to send new images to the user. A much easier method would be a switch to change the WARN() over to a panic. This makes debugging easier in that I can now test the actual image the WARN() was seen on and I do not have to engage in remote debugging. This patch adds a panic_on_warn kernel parameter and /proc/sys/kernel/panic_on_warn calls panic() in the warn_slowpath_common() path. The function will still print out the location of the warning. An example of the panic_on_warn output: The first line below is from the WARN_ON() to output the WARN_ON()'s location. After that the panic() output is displayed. WARNING: CPU: 30 PID: 11698 at /home/prarit/dummy_module/dummy-module.c:25 init_dummy+0x1f/0x30 [dummy_module]() Kernel panic - not syncing: panic_on_warn set ... CPU: 30 PID: 11698 Comm: insmod Tainted: G W OE 3.17.0+ #57 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013 0000000000000000 000000008e3f87df ffff88080f093c38 ffffffff81665190 0000000000000000 ffffffff818aea3d ffff88080f093cb8 ffffffff8165e2ec ffffffff00000008 ffff88080f093cc8 ffff88080f093c68 000000008e3f87df Call Trace: [] dump_stack+0x46/0x58 [] panic+0xd0/0x204 [] ? init_dummy+0x1f/0x30 [dummy_module] [] warn_slowpath_common+0xd0/0xd0 [] ? dummy_greetings+0x40/0x40 [dummy_module] [] warn_slowpath_null+0x1a/0x20 [] init_dummy+0x1f/0x30 [dummy_module] [] do_one_initcall+0xd4/0x210 [] ? __vunmap+0xc2/0x110 [] load_module+0x16a9/0x1b30 [] ? store_uevent+0x70/0x70 [] ? copy_module_from_fd.isra.44+0x129/0x180 [] SyS_finit_module+0xa6/0xd0 [] system_call_fastpath+0x12/0x17 Successfully tested by me. hpa said: There is another very valid use for this: many operators would rather a machine shuts down than being potentially compromised either functionally or security-wise. Signed-off-by: Prarit Bhargava Cc: Jonathan Corbet Cc: Rusty Russell Cc: "H. Peter Anvin" Cc: Andi Kleen Cc: Masami Hiramatsu Acked-by: Yasuaki Ishimatsu Cc: Fabian Frederick Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kernel/panic.c: update comments for print_tainted

2014-11-14T00:17:06Z

Commit 69361eef9056 ("panic: add TAINT_SOFTLOCKUP") added the 'L' flag, but failed to update the comments for print_tainted(). So, update the comments. Signed-off-by: Xie XiuQi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

panic: add TAINT_SOFTLOCKUP

2014-08-08T22:57:24Z

This taint flag will be set if the system has ever entered a softlockup state. Similar to TAINT_WARN it is useful to know whether or not the system has been in a softlockup state when debugging. [akpm@linux-foundation.org: apply the taint before calling panic()] Signed-off-by: Josh Hunt Cc: Jason Baron Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kernel/panic.c: add "crash_kexec_post_notifiers" option for kdump after panic_notifers

2014-06-06T23:08:12Z

Add a "crash_kexec_post_notifiers" boot option to run kdump after running panic_notifiers and dump kmsg. This can help rare situations where kdump fails because of unstable crashed kernel or hardware failure (memory corruption on critical data/code), or the 2nd kernel is already broken by the 1st kernel (it's a broken behavior, but who can guarantee that the "crashed" kernel works correctly?). Usage: add "crash_kexec_post_notifiers" to kernel boot option. Note that this actually increases risks of the failure of kdump. This option should be set only if you worry about the rare case of kdump failure rather than increasing the chance of success. Signed-off-by: Masami Hiramatsu Acked-by: Motohiro Kosaki Acked-by: Vivek Goyal Cc: Eric Biederman Cc: Yoshihiro YUNOMAE Cc: Satoru MORIYA Cc: Tomoki Sekiyama Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds