user/sven/linux.git/kernel/pid_namespace.c, branch v5.12.7

Merge tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

2020-12-15T00:40:27Z

Pull misc fixes from Christian Brauner: "This contains several fixes which felt worth being combined into a single branch: - Use put_nsproxy() instead of open-coding it switch_task_namespaces() - Kirill's work to unify lifecycle management for all namespaces. The lifetime counters are used identically for all namespaces types. Namespaces may of course have additional unrelated counters and these are not altered. This work allows us to unify the type of the counters and reduces maintenance cost by moving the counter in one place and indicating that basic lifetime management is identical for all namespaces. - Peilin's fix adding three byte padding to Dmitry's PTRACE_GET_SYSCALL_INFO uapi struct to prevent an info leak. - Two smal patches to convert from the /* fall through */ comment annotation to the fallthrough keyword annotation which I had taken into my branch and into -next before df561f6688fe ("treewide: Use fallthrough pseudo-keyword") made it upstream which fixed this tree-wide. Since I didn't want to invalidate all testing for other commits I didn't rebase and kept them" * tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: nsproxy: use put_nsproxy() in switch_task_namespaces() sys: Convert to the new fallthrough notation signal: Convert to the new fallthrough notation time: Use generic ns_common::count cgroup: Use generic ns_common::count mnt: Use generic ns_common::count user: Use generic ns_common::count pid: Use generic ns_common::count ipc: Use generic ns_common::count uts: Use generic ns_common::count net: Use generic ns_common::count ns: Add a common refcount into ns_common ptrace: Prevent kernel-infoleak in ptrace_get_syscall_info()

kernel/: fix repeated words in comments

2020-10-16T18:11:19Z

Fix multiple occurrences of duplicated words in kernel/. Fix one typo/spello on the same line as a duplicate word. Change one instance of "the the" to "that the". Otherwise just drop one of the repeated words. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Link: https://lkml.kernel.org/r/98202fa6-8919-ef63-9efe-c0fad5ca7af1@infradead.org Signed-off-by: Linus Torvalds

pid: Use generic ns_common::count

2020-08-19T12:14:06Z

Switch over pid namespaces to use the newly introduced common lifetime counter. Currently every namespace type has its own lifetime counter which is stored in the specific namespace struct. The lifetime counters are used identically for all namespaces types. Namespaces may of course have additional unrelated counters and these are not altered. This introduces a common lifetime counter into struct ns_common. The ns_common struct encompasses information that all namespaces share. That should include the lifetime counter since its common for all of them. It also allows us to unify the type of the counters across all namespaces. Most of them use refcount_t but one uses atomic_t and at least one uses kref. Especially the last one doesn't make much sense since it's just a wrapper around refcount_t since 2016 and actually complicates cleanup operations by having to use container_of() to cast the correct namespace struct out of struct ns_common. Having the lifetime counter for the namespaces in one place reduces maintenance cost. Not just because after switching all namespaces over we will have removed more code than we added but also because the logic is more easily understandable and we indicate to the user that the basic lifetime requirements for all namespaces are currently identical. Signed-off-by: Kirill Tkhai Reviewed-by: Kees Cook Acked-by: Christian Brauner Link: https://lore.kernel.org/r/159644979226.604812.7512601754841882036.stgit@localhost.localdomain Signed-off-by: Christian Brauner

pid_namespace: use checkpoint_restore_ns_capable() for ns_last_pid

2020-07-19T18:14:42Z

Use the newly introduced capability CAP_CHECKPOINT_RESTORE to allow writing to ns_last_pid. Signed-off-by: Adrian Reber Signed-off-by: Nicolas Viennot Reviewed-by: Serge Hallyn Acked-by: Christian Brauner Link: https://lore.kernel.org/r/20200719100418.2112740-4-areber@redhat.com Signed-off-by: Christian Brauner

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-06-03T23:27:18Z

Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...

nsproxy: add struct nsset

2020-05-09T11:57:12Z

Add a simple struct nsset. It holds all necessary pieces to switch to a new set of namespaces without leaving a task in a half-switched state which we will make use of in the next patch. This patch switches the existing setns logic over without causing a change in setns() behavior. This brings setns() closer to how unshare() works(). The prepare_ns() function is responsible to prepare all necessary information. This has two reasons. First it minimizes dependencies between individual namespaces, i.e. all install handler can expect that all fields are properly initialized independent in what order they are called in. Second, this makes the code easier to maintain and easier to follow if it needs to be changed. The prepare_ns() helper will only be switched over to use a flags argument in the next patch. Here it will still use nstype as a simple integer argument which was argued would be clearer. I'm not particularly opinionated about this if it really helps or not. The struct nsset itself already contains the flags field since its name already indicates that it can contain information required by different namespaces. None of this should have functional consequences. Signed-off-by: Christian Brauner Reviewed-by: Serge Hallyn Cc: Eric W. Biederman Cc: Serge Hallyn Cc: Jann Horn Cc: Michael Kerrisk Cc: Aleksa Sarai Link: https://lore.kernel.org/r/20200505140432.181565-2-christian.brauner@ubuntu.com

sysctl: pass kernel pointers to ->proc_handler

2020-04-27T06:07:40Z

Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig Acked-by: Andrey Ignatov Signed-off-by: Al Viro

pid: Improve the comment about waiting in zap_pid_ns_processes

2020-02-28T22:29:12Z

Oleg wrote a very informative comment, but with the removal of proc_cleanup_work it is no longer accurate. Rewrite the comment so that it only talks about the details that are still relevant, and hopefully is a little clearer. Signed-off-by: "Eric W. Biederman"

proc: Remove the now unnecessary internal mount of proc

2020-02-28T18:06:14Z

There remains no more code in the kernel using pids_ns->proc_mnt, therefore remove it from the kernel. The big benefit of this change is that one of the most error prone and tricky parts of the pid namespace implementation, maintaining kernel mounts of proc is removed. In addition removing the unnecessary complexity of the kernel mount fixes a regression that caused the proc mount options to be ignored. Now that the initial mount of proc comes from userspace, those mount options are again honored. This fixes Android's usage of the proc hidepid option. Reported-by: Alistair Strachan Fixes: e94591d0d90c ("proc: Convert proc_mount to use mount_ns.") Signed-off-by: "Eric W. Biederman"

fork: extend clone3() to support setting a PID

2019-11-15T22:49:22Z

The main motivation to add set_tid to clone3() is CRIU. To restore a process with the same PID/TID CRIU currently uses /proc/sys/kernel/ns_last_pid. It writes the desired (PID - 1) to ns_last_pid and then (quickly) does a clone(). This works most of the time, but it is racy. It is also slow as it requires multiple syscalls. Extending clone3() to support *set_tid makes it possible restore a process using CRIU without accessing /proc/sys/kernel/ns_last_pid and race free (as long as the desired PID/TID is available). This clone3() extension places the same restrictions (CAP_SYS_ADMIN) on clone3() with *set_tid as they are currently in place for ns_last_pid. The original version of this change was using a single value for set_tid. At the 2019 LPC, after presenting set_tid, it was, however, decided to change set_tid to an array to enable setting the PID of a process in multiple PID namespaces at the same time. If a process is created in a PID namespace it is possible to influence the PID inside and outside of the PID namespace. Details also in the corresponding selftest. To create a process with the following PIDs: PID NS level Requested PID 0 (host) 31496 1 42 2 1 For that example the two newly introduced parameters to struct clone_args (set_tid and set_tid_size) would need to be: set_tid[0] = 1; set_tid[1] = 42; set_tid[2] = 31496; set_tid_size = 3; If only the PIDs of the two innermost nested PID namespaces should be defined it would look like this: set_tid[0] = 1; set_tid[1] = 42; set_tid_size = 2; The PID of the newly created process would then be the next available free PID in the PID namespace level 0 (host) and 42 in the PID namespace at level 1 and the PID of the process in the innermost PID namespace would be 1. The set_tid array is used to specify the PID of a process starting from the innermost nested PID namespaces up to set_tid_size PID namespaces. set_tid_size cannot be larger then the current PID namespace level. Signed-off-by: Adrian Reber Reviewed-by: Christian Brauner Reviewed-by: Oleg Nesterov Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Acked-by: Andrei Vagin Link: https://lore.kernel.org/r/20191115123621.142252-1-areber@redhat.com Signed-off-by: Christian Brauner