user/sven/linux.git/kernel/power/swap.c, branch v4.9.142

Merge tag 'pm-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2016-07-27T00:29:07Z

Pull power management updates from Rafael Wysocki: "Again, the majority of changes go into the cpufreq subsystem, but there are no big features this time. The cpufreq changes that stand out somewhat are the governor interface rework and improvements related to the handling of frequency tables. Apart from those, there are fixes and new device/CPU IDs in drivers, cleanups and an improvement of the new schedutil governor. Next, there are some changes in the hibernation core, including a fix for a nasty problem related to the MONITOR/MWAIT usage by CPU offline during resume from hibernation, a few core improvements related to memory management during resume, a couple of additional debug features and cleanups. Finally, we have some fixes and cleanups in the devfreq subsystem, generic power domains framework improvements related to system suspend/resume, support for some new chips in intel_idle and in the power capping RAPL driver, a new version of the AnalyzeSuspend utility and some assorted fixes and cleanups. Specifics: - Rework the cpufreq governor interface to make it more straightforward and modify the conservative governor to avoid using transition notifications (Rafael Wysocki). - Rework the handling of frequency tables by the cpufreq core to make it more efficient (Viresh Kumar). - Modify the schedutil governor to reduce the number of wakeups it causes to occur in cases when the CPU frequency doesn't need to be changed (Steve Muckle, Viresh Kumar). - Fix some minor issues and clean up code in the cpufreq core and governors (Rafael Wysocki, Viresh Kumar). - Add Intel Broxton support to the intel_pstate driver (Srinivas Pandruvada). - Fix problems related to the config TDP feature and to the validity of the MSR_HWP_INTERRUPT register in intel_pstate (Jan Kiszka, Srinivas Pandruvada). - Make intel_pstate update the cpu_frequency tracepoint even if the frequency doesn't change to avoid confusing powertop (Rafael Wysocki). - Clean up the usage of __init/__initdata in intel_pstate, mark some of its internal variables as __read_mostly and drop an unused structure element from it (Jisheng Zhang, Carsten Emde). - Clean up the usage of some duplicate MSR symbols in intel_pstate and turbostat (Srinivas Pandruvada). - Update/fix the powernv, s3c24xx and mvebu cpufreq drivers (Akshay Adiga, Viresh Kumar, Ben Dooks). - Fix a regression (introduced during the 4.5 cycle) in the pcc-cpufreq driver by reverting the problematic commit (Andreas Herrmann). - Add support for Intel Denverton to intel_idle, clean up Broxton support in it and make it explicitly non-modular (Jacob Pan, Jan Beulich, Paul Gortmaker). - Add support for Denverton and Ivy Bridge server to the Intel RAPL power capping driver and make it more careful about the handing of MSRs that may not be present (Jacob Pan, Xiaolong Wang). - Fix resume from hibernation on x86-64 by making the CPU offline during resume avoid using MONITOR/MWAIT in the "play dead" loop which may lead to an inadvertent "revival" of a "dead" CPU and a page fault leading to a kernel crash from it (Rafael Wysocki). - Make memory management during resume from hibernation more straightforward (Rafael Wysocki). - Add debug features that should help to detect problems related to hibernation and resume from it (Rafael Wysocki, Chen Yu). - Clean up hibernation core somewhat (Rafael Wysocki). - Prevent KASAN from instrumenting the hibernation core which leads to large numbers of false-positives from it (James Morse). - Prevent PM (hibernate and suspend) notifiers from being called during the cleanup phase if they have not been called during the corresponding preparation phase which is possible if one of the other notifiers returns an error at that time (Lianwei Wang). - Improve suspend-related debug printout in the tasks freezer and clean up suspend-related console handling (Roger Lu, Borislav Petkov). - Update the AnalyzeSuspend script in the kernel sources to version 4.2 (Todd Brandt). - Modify the generic power domains framework to make it handle system suspend/resume better (Ulf Hansson). - Make the runtime PM framework avoid resuming devices synchronously when user space changes the runtime PM settings for them and improve its error reporting (Rafael Wysocki, Linus Walleij). - Fix error paths in devfreq drivers (exynos, exynos-ppmu, exynos-bus) and in the core, make some devfreq code explicitly non-modular and change some of it into tristate (Bartlomiej Zolnierkiewicz, Peter Chen, Paul Gortmaker). - Add DT support to the generic PM clocks management code and make it export some more symbols (Jon Hunter, Paul Gortmaker). - Make the PCI PM core code slightly more robust against possible driver errors (Andy Shevchenko). - Make it possible to change DESTDIR and PREFIX in turbostat (Andy Shevchenko)" * tag 'pm-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits) Revert "cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency" PM / hibernate: Introduce test_resume mode for hibernation cpufreq: export cpufreq_driver_resolve_freq() cpufreq: Disallow ->resolve_freq() for drivers providing ->target_index() PCI / PM: check all fields in pci_set_platform_pm() cpufreq: acpi-cpufreq: use cached frequency mapping when possible cpufreq: schedutil: map raw required frequency to driver frequency cpufreq: add cpufreq_driver_resolve_freq() cpufreq: intel_pstate: Check cpuid for MSR_HWP_INTERRUPT intel_pstate: Update cpu_frequency tracepoint every time cpufreq: intel_pstate: clean remnant struct element PM / tools: scripts: AnalyzeSuspend v4.2 x86 / hibernate: Use hlt_play_dead() when resuming from hibernation cpufreq: powernv: Replacing pstate_id with frequency table index intel_pstate: Fix MSR_CONFIG_TDP_x addressing in core_get_max_pstate() PM / hibernate: Image data protection during restoration PM / hibernate: Add missing braces in __register_nosave_region() PM / hibernate: Clean up comments in snapshot.c PM / hibernate: Clean up function headers in snapshot.c PM / hibernate: Add missing braces in hibernate_setup() ...

PM / hibernate: Introduce test_resume mode for hibernation

2016-07-22T11:57:23Z

test_resume mode is to verify if the snapshot data written to swap device can be successfully restored to memory. It is useful to ease the debugging process on hibernation, since this mode can not only bypass the BIOSes/bootloader, but also the system re-initialization. To avoid the risk to break the filesystm on persistent storage, this patch resumes the image with tasks frozen. For example: echo test_resume > /sys/power/disk echo disk > /sys/power/state [ 187.306470] PM: Image saving progress: 70% [ 187.395298] PM: Image saving progress: 80% [ 187.476697] PM: Image saving progress: 90% [ 187.554641] PM: Image saving done. [ 187.558896] PM: Wrote 594600 kbytes in 0.90 seconds (660.66 MB/s) [ 187.566000] PM: S| [ 187.589742] PM: Basic memory bitmaps freed [ 187.594694] PM: Checking hibernation image [ 187.599865] PM: Image signature found, resuming [ 187.605209] PM: Loading hibernation image. [ 187.665753] PM: Basic memory bitmaps created [ 187.691397] PM: Using 3 thread(s) for decompression. [ 187.691397] PM: Loading and decompressing image data (148650 pages)... [ 187.889719] PM: Image loading progress: 0% [ 188.100452] PM: Image loading progress: 10% [ 188.244781] PM: Image loading progress: 20% [ 189.057305] PM: Image loading done. [ 189.068793] PM: Image successfully loaded Suggested-by: Rafael J. Wysocki Signed-off-by: Chen Yu Signed-off-by: Rafael J. Wysocki

pm: use bio op accessors

2016-06-07T19:41:38Z

Separate the op from the rq_flag_bits and have the pm code set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Jens Axboe

block/fs/drivers: remove rw argument from submit_bio

2016-06-07T19:41:38Z

This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe

PM / Hibernate: Call flush_icache_range() on pages restored in-place

2016-04-28T12:35:48Z

Some architectures require code written to memory as if it were data to be 'cleaned' from any data caches before the processor can fetch them as new instructions. During resume from hibernate, the snapshot code copies some pages directly, meaning these architectures do not get a chance to perform their cache maintenance. Modify the read and decompress code to call flush_icache_range() on all pages that are restored, so that the restored in-place pages are guaranteed to be executable on these architectures. Signed-off-by: James Morse Acked-by: Pavel Machek Acked-by: Rafael J. Wysocki Acked-by: Catalin Marinas [will: make clean_pages_on_* static and remove initialisers] Signed-off-by: Will Deacon

mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIM

2015-11-07T01:50:42Z

__GFP_WAIT was used to signal that the caller was in atomic context and could not sleep. Now it is possible to distinguish between true atomic context and callers that are not willing to sleep. The latter should clear __GFP_DIRECT_RECLAIM so kswapd will still wake. As clearing __GFP_WAIT behaves differently, there is a risk that people will clear the wrong flags. This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly indicate what it does -- setting it allows all reclaim activity, clearing them prevents it. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mel Gorman Acked-by: Michal Hocko Acked-by: Vlastimil Babka Acked-by: Johannes Weiner Cc: Christoph Lameter Acked-by: David Rientjes Cc: Vitaly Wool Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

block: add a bi_error field to struct bio

2015-07-29T14:55:15Z

Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: NeilBrown Signed-off-by: Jens Axboe

suspend: simplify block I/O handling

2015-05-19T15:19:59Z

Stop abusing struct page functionality and the swap end_io handler, and instead add a modified version of the blk-lib.c bio_batch helpers. Also move the block I/O code into swap.c as they are directly tied into each other. Signed-off-by: Christoph Hellwig Tested-by: Pavel Machek Tested-by: Ming Lin Acked-by: Pavel Machek Acked-by: Rafael J. Wysocki Signed-off-by: Jens Axboe

PM / hibernate: Deletion of an unnecessary check before the function call "vfree"

2014-11-18T01:49:40Z

The vfree() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Rafael J. Wysocki

PM / Hibernate: Migrate to ktime_t

2014-11-03T00:02:55Z

This patch migrates swsusp_show_speed and its callers to using ktime_t instead of 'struct timeval' which suffers from the y2038 problem. Changes to swsusp_show_speed: - use ktime_t for start and stop times - pass start and stop times by value Calling functions affected: - load_image - load_image_lzo - save_image - save_image_lzo - hibernate_preallocate_memory Design decisions: - use ktime_t to preserve same granularity of reporting as before - use centisecs logic as before to avoid 'div by zero' issues caused by using seconds and nanoseconds directly - use monotonic time (ktime_get()) since we only care about elapsed time. Signed-off-by: Tina Ruchandani Suggested-by: Arnd Bergmann Reviewed-by: Arnd Bergmann Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki