user/sven/linux.git/kernel/power, branch v3.16.42

PM / sleep: fix device reference leak in test_suspend

2017-02-23T03:54:27Z

commit ceb75787bc75d0a7b88519ab8a68067ac690f55a upstream. Make sure to drop the reference taken by class_find_device() after opening the RTC device. Fixes: 77437fd4e61f (pm: boot time suspend selftest) Signed-off-by: Johan Hovold Signed-off-by: Rafael J. Wysocki Signed-off-by: Ben Hutchings

PM / hibernate: Restore processor state before using per-CPU variables

2016-11-20T01:17:10Z

commit 62822e2ec4ad091ba31f823f577ef80db52e3c2c upstream. Restore the processor state before calling any other functions to ensure per-CPU variables can be used with KASLR memory randomization. Tracing functions use per-CPU variables (GS based on x86) and one was called just before restoring the processor state fully. It resulted in a double fault when both the tracing & the exception handler functions tried to use a per-CPU variable. Fixes: bb3632c6101b (PM / sleep: trace events for suspend/resume) Reported-and-tested-by: Borislav Petkov Reported-by: Jiri Kosina Tested-by: Rafael J. Wysocki Tested-by: Jiri Kosina Signed-off-by: Thomas Garnier Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki Signed-off-by: Ben Hutchings

PM / sleep: Increase default DPM watchdog timeout to 60

2015-07-15T09:00:51Z

commit fff3b16d2754a061a3549c4307a186423a0128fd upstream. Many harddisks (mostly WD ones) have firmware problems and take too long, more than 10 seconds, to resume from suspend. And this often exceeds the default DPM watchdog timeout (12 seconds), resulting in a kernel panic out of sudden. Since most distros just take the default as is, we should give a bit more safer value. This patch increases the default value from 12 seconds to one minute, which has been confirmed to be long enough for such problematic disks. Link: https://bugzilla.kernel.org/show_bug.cgi?id=91921 Fixes: 70fea60d888d (PM / Sleep: Detect device suspend/resume lockup and log event) Signed-off-by: Takashi Iwai Signed-off-by: Rafael J. Wysocki Signed-off-by: Luis Henriques

PM / Sleep: fix recovery during resuming from hibernation

2014-11-13T11:48:48Z

commit 94fb823fcb4892614f57e59601bb9d4920f24711 upstream. If a device's dev_pm_ops::freeze callback fails during the QUIESCE phase, we don't rollback things correctly calling the thaw and complete callbacks. This could leave some devices in a suspended state in case of an error during resuming from hibernation. Signed-off-by: Imre Deak Signed-off-by: Rafael J. Wysocki Signed-off-by: Luis Henriques

OOM, PM: OOM killed task shouldn't escape PM suspend

2014-11-05T11:43:09Z

commit 5695be142e203167e3cb515ef86a88424f3524eb upstream. PM freezer relies on having all tasks frozen by the time devices are getting frozen so that no task will touch them while they are getting frozen. But OOM killer is allowed to kill an already frozen task in order to handle OOM situtation. In order to protect from late wake ups OOM killer is disabled after all tasks are frozen. This, however, still keeps a window open when a killed task didn't manage to die by the time freeze_processes finishes. Reduce the race window by checking all tasks after OOM killer has been disabled. This is still not race free completely unfortunately because oom_killer_disable cannot stop an already ongoing OOM killer so a task might still wake up from the fridge and get killed without freeze_processes noticing. Full synchronization of OOM and freezer is, however, too heavy weight for this highly unlikely case. Introduce and check oom_kills counter which gets incremented early when the allocator enters __alloc_pages_may_oom path and only check all the tasks if the counter changes during the freezing attempt. The counter is updated so early to reduce the race window since allocator checked oom_killer_disabled which is set by PM-freezing code. A false positive will push the PM-freezer into a slow path but that is not a big deal. Changes since v1 - push the re-check loop out of freeze_processes into check_frozen_processes and invert the condition to make the code more readable as per Rafael Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring) Signed-off-by: Michal Hocko Signed-off-by: Rafael J. Wysocki Signed-off-by: Luis Henriques

PM / sleep: fix freeze_ops NULL pointer dereferences

2014-07-15T12:27:30Z

This patch fixes a NULL pointer dereference issue introduced by commit 1f0b63866fc1 (ACPI / PM: Hold ACPI scan lock over the "freeze" sleep state). Fixes: 1f0b63866fc1 (ACPI / PM: Hold ACPI scan lock over the "freeze" sleep state) Link: http://marc.info/?l=linux-pm&m=140541182017443&w=2 Reported-and-tested-by: Alexander Stein Signed-off-by: Zhang Rui Signed-off-by: Rafael J. Wysocki

PM / sleep: Fix request_firmware() error at resume

2014-07-15T12:27:29Z

The commit [247bc037: PM / Sleep: Mitigate race between the freezer and request_firmware()] introduced the finer state control, but it also leads to a new bug; for example, a bug report regarding the firmware loading of intel BT device at suspend/resume: https://bugzilla.novell.com/show_bug.cgi?id=873790 The root cause seems to be a small window between the process resume and the clear of usermodehelper lock. The request_firmware() function checks the UMH lock and gives up when it's in UMH_DISABLE state. This is for avoiding the invalid f/w loading during suspend/resume phase. The problem is, however, that usermodehelper_enable() is called at the end of thaw_processes(). Thus, a thawed process in between can kick off the f/w loader code path (in this case, via btusb_setup_intel()) even before the call of usermodehelper_enable(). Then usermodehelper_read_trylock() returns an error and request_firmware() spews WARN_ON() in the end. This oneliner patch fixes the issue just by setting to UMH_FREEZING state again before restarting tasks, so that the call of request_firmware() will be blocked until the end of this function instead of returning an error. Fixes: 247bc0374254 (PM / Sleep: Mitigate race between the freezer and request_firmware()) Link: https://bugzilla.novell.com/show_bug.cgi?id=873790 Cc: 3.4+ # 3.4+ Signed-off-by: Takashi Iwai Signed-off-by: Rafael J. Wysocki

x86, kaslr: boot-time selectable with hibernation

2014-06-16T21:30:44Z

Changes kASLR from being compile-time selectable (blocked by CONFIG_HIBERNATION), to being boot-time selectable (with hibernation available by default) via the "kaslr" kernel command line. Signed-off-by: Kees Cook Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

PM / hibernate: introduce "nohibernate" boot parameter

2014-06-16T21:29:39Z

To support using kernel features that are not compatible with hibernation, this creates the "nohibernate" kernel boot parameter to disable both hibernation and resume. This allows hibernation support to be a boot-time choice instead of only a compile-time choice. Signed-off-by: Kees Cook Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

Merge branch 'pm-sleep'

2014-06-12T11:43:08Z

* pm-sleep: PM / sleep: trace events for device PM callbacks PM / sleep: trace events for suspend/resume