user/sven/linux.git/kernel/power, branch v4.15.12

mm: remove __GFP_COLD

2017-11-16T02:21:06Z

As the page free path makes no distinction between cache hot and cold pages, there is no real useful ordering of pages in the free list that allocation requests can take advantage of. Juding from the users of __GFP_COLD, it is likely that a number of them are the result of copying other sites instead of actually measuring the impact. Remove the __GFP_COLD parameter which simplifies a number of paths in the page allocator. This is potentially controversial but bear in mind that the size of the per-cpu pagelists versus modern cache sizes means that the whole per-cpu list can often fit in the L3 cache. Hence, there is only a potential benefit for microbenchmarks that alloc/free pages in a tight loop. It's even worse when THP is taken into account which has little or no chance of getting a cache-hot page as the per-cpu list is bypassed and the zeroing of multiple pages will thrash the cache anyway. The truncate microbenchmarks are not shown as this patch affects the allocation path and not the free path. A page fault microbenchmark was tested but it showed no sigificant difference which is not surprising given that the __GFP_COLD branches are a miniscule percentage of the fault path. Link: http://lkml.kernel.org/r/20171018075952.10627-9-mgorman@techsingularity.net Signed-off-by: Mel Gorman Acked-by: Vlastimil Babka Cc: Andi Kleen Cc: Dave Chinner Cc: Dave Hansen Cc: Jan Kara Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'pm-sleep'

2017-11-13T00:41:20Z

* pm-sleep: freezer: Fix typo in freezable_schedule_timeout() comment PM / s2idle: Clear the events_check_enabled flag PM / sleep: Remove pm_complete_with_resume_check() PM: ARM: locomo: Drop suspend and resume bus type callbacks PM: Use a more common logging style PM: Document rules on using pm_runtime_resume() in system suspend callbacks

Merge branches 'pm-cpufreq-sched' and 'pm-opp'

2017-11-13T00:40:52Z

* pm-cpufreq-sched: cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq * pm-opp: PM / OPP: Add dev_pm_opp_{un}register_get_pstate_helper() PM / OPP: Support updating performance state of device's power domain PM / OPP: add missing of_node_put() for of_get_cpu_node() PM / OPP: Rename dev_pm_opp_register_put_opp_helper() PM / OPP: Add missing of_node_put(np) PM / OPP: Move error message to debug level PM / OPP: Use snprintf() to avoid kasprintf() and kfree() PM / OPP: Move the OPP directory out of power/

PM / s2idle: Clear the events_check_enabled flag

2017-11-08T22:52:02Z

Problem: This flag does not get cleared currently in the suspend or resume path in the following cases: * In case some driver's suspend routine returns an error. * Successful s2idle case * etc? Why is this a problem: What happens is that the next suspend attempt could fail even though the user did not enable the flag by writing to /sys/power/wakeup_count. This is 1 use case how the issue can be seen (but similar use case with driver suspend failure can be thought of): 1. Read /sys/power/wakeup_count 2. echo count > /sys/power/wakeup_count 3. echo freeze > /sys/power/wakeup_count 4. Let the system suspend, and wakeup the system using some wake source that calls pm_wakeup_event() e.g. power button or something. 5. Note that the combined wakeup count would be incremented due to the pm_wakeup_event() in the resume path. 6. After resuming the events_check_enabled flag is still set. At this point if the user attempts to freeze again (without writing to /sys/power/wakeup_count), the suspend would fail even though there has been no wake event since the past resume. Address that by clearing the flag just before a resume is completed, so that it is always cleared for the corner cases mentioned above. Signed-off-by: Rajat Jain Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge branch 'pm-domains' into pm-opp

2017-10-13T22:50:31Z

Merge back suspend/resume/hibernate material for v4.15.

2017-10-09T12:20:07Z

PM: Use a more common logging style

2017-10-03T00:57:17Z

Convert printks to pr_. Miscellanea: o Use pr_fmt with "PM:" and remove "PM: " from format strings o Coalesce format strings and realign format arguments o Convert an embedded incorrect function name to "%s: ", __func__ o Convert a couple multi-line formats to multiple pr_ calls Signed-off-by: Joe Perches Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

PM / OPP: Move the OPP directory out of power/

2017-10-03T00:45:12Z

The drivers/base/power/ directory is special and contains code related to power management core like system suspend/resume, hibernation, etc. It was fine to keep the OPP code inside it when we had just one file for it, but it is growing now and already has a directory for itself. Lets move it directly under drivers/ directory, just like cpufreq and cpuidle. Signed-off-by: Viresh Kumar Acked-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki

PM / s2idle: Invoke the ->wake() platform callback earlier

2017-09-28T23:26:13Z

The role of the ->wake() platform callback for suspend-to-idle is to deal with possible spurious wakeups, among other things. The ACPI implementation of it, acpi_s2idle_wake(), additionally checks the conditions for entering the Low Power S0 Idle state by the platform and reports the ones that have not been met. However, the ->wake() platform callback is invoked after calling dpm_noirq_resume_devices(), which means that the power states of some devices may have changed since s2idle_enter() returned, so some unmet Low Power S0 Idle conditions may be reported incorrectly as a result of that. To avoid these false positives, reorder the invocations of the dpm_noirq_resume_devices() routine and the ->wake() platform callback in s2idle_loop(). Fixes: 726fb6b4f2a8 (ACPI / PM: Check low power idle constraints for debug only) Tested-by: Srinivas Pandruvada Signed-off-by: Rafael J. Wysocki