user/sven/linux.git/kernel/power, branch v4.9.202

x86/power: Fix 'nosmt' vs hibernation triple fault during resume

2019-06-11T10:22:48Z

commit ec527c318036a65a083ef68d8ba95789d2212246 upstream. As explained in 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once") we always, no matter what, have to bring up x86 HT siblings during boot at least once in order to avoid first MCE bringing the system to its knees. That means that whenever 'nosmt' is supplied on the kernel command-line, all the HT siblings are as a result sitting in mwait or cpudile after going through the online-offline cycle at least once. This causes a serious issue though when a kernel, which saw 'nosmt' on its commandline, is going to perform resume from hibernation: if the resume from the hibernated image is successful, cr3 is flipped in order to point to the address space of the kernel that is being resumed, which in turn means that all the HT siblings are all of a sudden mwaiting on address which is no longer valid. That results in triple fault shortly after cr3 is switched, and machine reboots. Fix this by always waking up all the SMT siblings before initiating the 'restore from hibernation' process; this guarantees that all the HT siblings will be properly carried over to the resumed kernel waiting in resume_play_dead(), and acted upon accordingly afterwards, based on the target kernel configuration. Symmetricaly, the resumed kernel has to push the SMT siblings to mwait again in case it has SMT disabled; this means it has to online all the siblings when resuming (so that they come out of hlt) and offline them again to let them reach mwait. Cc: 4.19+ # v4.19+ Debugged-by: Thomas Gleixner Fixes: 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once") Signed-off-by: Jiri Kosina Acked-by: Pavel Machek Reviewed-by: Thomas Gleixner Reviewed-by: Josh Poimboeuf Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM / sleep: wakeup: Fix build error caused by missing SRCU support

2018-09-09T18:01:23Z

commit 3df6f61fff49632492490fb6e42646b803a9958a upstream. Commit ea0212f40c6 (power: auto select CONFIG_SRCU) made the code in drivers/base/power/wakeup.c use SRCU instead of RCU, but it forgot to select CONFIG_SRCU in Kconfig, which leads to the following build error if CONFIG_SRCU is not selected somewhere else: drivers/built-in.o: In function `wakeup_source_remove': (.text+0x3c6fc): undefined reference to `synchronize_srcu' drivers/built-in.o: In function `pm_print_active_wakeup_sources': (.text+0x3c7a8): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `pm_print_active_wakeup_sources': (.text+0x3c84c): undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `device_wakeup_arm_wake_irqs': (.text+0x3d1d8): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `device_wakeup_arm_wake_irqs': (.text+0x3d228): undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs': (.text+0x3d24c): undefined reference to `__srcu_read_lock' drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs': (.text+0x3d29c): undefined reference to `__srcu_read_unlock' drivers/built-in.o:(.data+0x4158): undefined reference to `process_srcu' Fix this error by selecting CONFIG_SRCU when PM_SLEEP is enabled. Fixes: ea0212f40c6 (power: auto select CONFIG_SRCU) Cc: 4.2+ # 4.2+ Signed-off-by: zhangyi (F) [ rjw: Minor subject/changelog fixups ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM / hibernate: Fix oops at snapshot_write()

2018-07-17T09:37:54Z

commit fc14eebfc20854a38fd9f1d93a42b1783dad4d17 upstream. syzbot is reporting NULL pointer dereference at snapshot_write() [1]. This is because data->handle is zero-cleared by ioctl(SNAPSHOT_FREE). Fix this by checking data_of(data->handle) != NULL before using it. [1] https://syzkaller.appspot.com/bug?id=828a3c71bd344a6de8b6a31233d51a72099f27fd Signed-off-by: Tetsuo Handa Reported-by: syzbot Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

x86/power: Fix swsusp_arch_resume prototype

2018-05-30T05:50:24Z

[ Upstream commit 328008a72d38b5bde6491e463405c34a81a65d3e ] The declaration for swsusp_arch_resume marks it as 'asmlinkage', but the definition in x86-32 does not, and it fails to include the header with the declaration. This leads to a warning when building with link-time-optimizations: kernel/power/power.h:108:23: error: type of 'swsusp_arch_resume' does not match original declaration [-Werror=lto-type-mismatch] extern asmlinkage int swsusp_arch_resume(void); ^ arch/x86/power/hibernate_32.c:148:0: note: 'swsusp_arch_resume' was previously declared here int swsusp_arch_resume(void) This moves the declaration into a globally visible header file and fixes up both x86 definitions to match it. Signed-off-by: Arnd Bergmann Signed-off-by: Thomas Gleixner Cc: Len Brown Cc: Andi Kleen Cc: Nicolas Pitre Cc: linux-pm@vger.kernel.org Cc: "Rafael J. Wysocki" Cc: Pavel Machek Cc: Bart Van Assche Link: https://lkml.kernel.org/r/20180202145634.200291-2-arnd@arndb.de Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs

2017-10-12T09:51:25Z

commit 50e76632339d4655859523a39249dd95ee5e93e7 upstream. Cpusets vs. suspend-resume is _completely_ broken. And it got noticed because it now resulted in non-cpuset usage breaking too. On suspend cpuset_cpu_inactive() doesn't call into cpuset_update_active_cpus() because it doesn't want to move tasks about, there is no need, all tasks are frozen and won't run again until after we've resumed everything. But this means that when we finally do call into cpuset_update_active_cpus() after resuming the last frozen cpu in cpuset_cpu_active(), the top_cpuset will not have any difference with the cpu_active_mask and this it will not in fact do _anything_. So the cpuset configuration will not be restored. This was largely hidden because we would unconditionally create identity domains and mobile users would not in fact use cpusets much. And servers what do use cpusets tend to not suspend-resume much. An addition problem is that we'd not in fact wait for the cpuset work to finish before resuming the tasks, allowing spurious migrations outside of the specified domains. Fix the rebuild by introducing cpuset_force_rebuild() and fix the ordering with cpuset_wait_for_hotplug(). Reported-by: Andy Lutomirski Signed-off-by: Peter Zijlstra (Intel) Cc: Cc: Andy Lutomirski Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Tejun Heo Cc: Thomas Gleixner Fixes: deb7aa308ea2 ("cpuset: reorganize CPU / memory hotplug handling") Link: http://lkml.kernel.org/r/20170907091338.orwxrqkbfkki3c24@hirez.programming.kicks-ass.net Signed-off-by: Ingo Molnar Signed-off-by: Mike Galbraith Signed-off-by: Greg Kroah-Hartman

PM / sleep: fix device reference leak in test_suspend

2016-11-02T04:10:04Z

Make sure to drop the reference taken by class_find_device() after opening the RTC device. Fixes: 77437fd4e61f (pm: boot time suspend selftest) Signed-off-by: Johan Hovold Signed-off-by: Rafael J. Wysocki

PM / suspend: Fix missing KERN_CONT for suspend message

2016-10-24T12:38:02Z

Commit 4bcc595ccd80 (printk: reinstate KERN_CONT for printing continuation lines) exposed a missing KERN_CONT from one of the messages shown on entering suspend. With v4.9-rc1, the 'done.' shown after syncing the filesystems no longer appears as a continuation but a new message with its own timestamp. [ 9.259566] PM: Syncing filesystems ... [ 9.264119] done. Fix this by adding the KERN_CONT log level for the 'done.' part of the message seen after syncing filesystems. While we are at it, convert these suspend printks to pr_info and pr_cont, respectively. Signed-off-by: Jon Hunter Signed-off-by: Rafael J. Wysocki

oom, suspend: fix oom_killer_disable vs. pm suspend properly

2016-10-08T01:46:27Z

Commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race") has workaround an existing race between oom_killer_disable and oom_reaper by adding another round of try_to_freeze_tasks after the oom killer was disabled. This was the easiest thing to do for a late 4.7 fix. Let's fix it properly now. After "oom: keep mm of the killed task available" we no longer have to call exit_oom_victim from the oom reaper because we have stable mm available and hide the oom_reaped mm by MMF_OOM_SKIP flag. So let's remove exit_oom_victim and the race described in the above commit doesn't exist anymore if. Unfortunately this alone is not sufficient for the oom_killer_disable usecase because now we do not have any reliable way to reach exit_oom_victim (the victim might get stuck on a way to exit for an unbounded amount of time). OOM killer can cope with that by checking mm flags and move on to another victim but we cannot do the same for oom_killer_disable as we would lose the guarantee of no further interference of the victim with the rest of the system. What we can do instead is to cap the maximum time the oom_killer_disable waits for victims. The only current user of this function (pm suspend) already has a concept of timeout for back off so we can reuse the same value there. Let's drop set_freezable for the oom_reaper kthread because it is no longer needed as the reaper doesn't wake or thaw any processes. Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko Cc: Tetsuo Handa Cc: Oleg Nesterov Cc: David Rientjes Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

PM / Hibernate: allow hibernation with PAGE_POISONING_ZERO

2016-09-13T00:35:27Z

PAGE_POISONING_ZERO disables zeroing new pages on alloc, they are poisoned (zeroed) as they become available. In the hibernate use case, free pages will appear in the system without being cleared, left there by the loading kernel. This patch will make sure free pages are cleared on resume when PAGE_POISONING_ZERO is enabled. We free the pages just after resume because we can't do it later: going through any device resume code might allocate some memory and invalidate the free pages bitmap. Thus we don't need to disable hibernation when PAGE_POISONING_ZERO is enabled. Signed-off-by: Anisse Astier Reviewed-by: Kees Cook Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

PM / sleep: enable suspend-to-idle even without registered suspend_ops

2016-09-13T00:17:19Z

Suspend-to-idle (aka the "freeze" sleep state) is a system sleep state in which all of the processors enter deepest possible idle state and wait for interrupts right after suspending all the devices. There is no hard requirement for a platform to support and register platform specific suspend_ops to enter suspend-to-idle/freeze state. Only deeper system sleep states like PM_SUSPEND_STANDBY and PM_SUSPEND_MEM rely on such low level support/implementation. suspend-to-idle can be entered as along as all the devices can be suspended. This patch enables the support for suspend-to-idle even on systems that don't have any low level support for deeper system sleep states and/or don't register any platform specific suspend_ops. Signed-off-by: Sudeep Holla Tested-by: Andy Gross Signed-off-by: Rafael J. Wysocki