user/sven/linux.git/kernel/power, branch v4.9.5

PM / sleep: fix device reference leak in test_suspend

2016-11-02T04:10:04Z

Make sure to drop the reference taken by class_find_device() after opening the RTC device. Fixes: 77437fd4e61f (pm: boot time suspend selftest) Signed-off-by: Johan Hovold Signed-off-by: Rafael J. Wysocki

PM / suspend: Fix missing KERN_CONT for suspend message

2016-10-24T12:38:02Z

Commit 4bcc595ccd80 (printk: reinstate KERN_CONT for printing continuation lines) exposed a missing KERN_CONT from one of the messages shown on entering suspend. With v4.9-rc1, the 'done.' shown after syncing the filesystems no longer appears as a continuation but a new message with its own timestamp. [ 9.259566] PM: Syncing filesystems ... [ 9.264119] done. Fix this by adding the KERN_CONT log level for the 'done.' part of the message seen after syncing filesystems. While we are at it, convert these suspend printks to pr_info and pr_cont, respectively. Signed-off-by: Jon Hunter Signed-off-by: Rafael J. Wysocki

oom, suspend: fix oom_killer_disable vs. pm suspend properly

2016-10-08T01:46:27Z

Commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race") has workaround an existing race between oom_killer_disable and oom_reaper by adding another round of try_to_freeze_tasks after the oom killer was disabled. This was the easiest thing to do for a late 4.7 fix. Let's fix it properly now. After "oom: keep mm of the killed task available" we no longer have to call exit_oom_victim from the oom reaper because we have stable mm available and hide the oom_reaped mm by MMF_OOM_SKIP flag. So let's remove exit_oom_victim and the race described in the above commit doesn't exist anymore if. Unfortunately this alone is not sufficient for the oom_killer_disable usecase because now we do not have any reliable way to reach exit_oom_victim (the victim might get stuck on a way to exit for an unbounded amount of time). OOM killer can cope with that by checking mm flags and move on to another victim but we cannot do the same for oom_killer_disable as we would lose the guarantee of no further interference of the victim with the rest of the system. What we can do instead is to cap the maximum time the oom_killer_disable waits for victims. The only current user of this function (pm suspend) already has a concept of timeout for back off so we can reuse the same value there. Let's drop set_freezable for the oom_reaper kthread because it is no longer needed as the reaper doesn't wake or thaw any processes. Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko Cc: Tetsuo Handa Cc: Oleg Nesterov Cc: David Rientjes Cc: Vladimir Davydov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

PM / Hibernate: allow hibernation with PAGE_POISONING_ZERO

2016-09-13T00:35:27Z

PAGE_POISONING_ZERO disables zeroing new pages on alloc, they are poisoned (zeroed) as they become available. In the hibernate use case, free pages will appear in the system without being cleared, left there by the loading kernel. This patch will make sure free pages are cleared on resume when PAGE_POISONING_ZERO is enabled. We free the pages just after resume because we can't do it later: going through any device resume code might allocate some memory and invalidate the free pages bitmap. Thus we don't need to disable hibernation when PAGE_POISONING_ZERO is enabled. Signed-off-by: Anisse Astier Reviewed-by: Kees Cook Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

PM / sleep: enable suspend-to-idle even without registered suspend_ops

2016-09-13T00:17:19Z

Suspend-to-idle (aka the "freeze" sleep state) is a system sleep state in which all of the processors enter deepest possible idle state and wait for interrupts right after suspending all the devices. There is no hard requirement for a platform to support and register platform specific suspend_ops to enter suspend-to-idle/freeze state. Only deeper system sleep states like PM_SUSPEND_STANDBY and PM_SUSPEND_MEM rely on such low level support/implementation. suspend-to-idle can be entered as along as all the devices can be suspended. This patch enables the support for suspend-to-idle even on systems that don't have any low level support for deeper system sleep states and/or don't register any platform specific suspend_ops. Signed-off-by: Sudeep Holla Tested-by: Andy Gross Signed-off-by: Rafael J. Wysocki

PM / sleep: Increase default DPM watchdog timeout to 120

2016-09-13T00:15:58Z

Recently we have a new report that, the harddisk can not resume on time due to firmware issues, and got a kernel panic because of DPM watchdog timeout. So adjust the default timeout from 60 to 120 to survive on this platform, and make DPM_WATCHDOG depending on EXPERT. Link: https://bugzilla.kernel.org/show_bug.cgi?id=117971 Suggested-by: Pavel Machek Suggested-by: Rafael J. Wysocki Reported-by: Higuita Signed-off-by: Chen Yu Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki

PM / QoS: avoid calling cancel_delayed_work_sync() during early boot

2016-09-05T13:07:53Z

of_clk_init() ends up calling into pm_qos_update_request() very early during boot where irq is expected to stay disabled. pm_qos_update_request() uses cancel_delayed_work_sync() which correctly assumes that irq is enabled on invocation and unconditionally disables and re-enables it. Gate cancel_delayed_work_sync() invocation with kevented_up() to avoid enabling irq unexpectedly during early boot. Signed-off-by: Tejun Heo Reported-and-tested-by: Qiao Zhou Link: http://lkml.kernel.org/r/d2501c4c-8e7b-bea3-1b01-000b36b5dfe9@asrmicro.com Signed-off-by: Rafael J. Wysocki

Merge branch 'pm-sleep'

2016-08-18T01:27:08Z

* pm-sleep: PM / hibernate: Fix rtree_next_node() to avoid walking off list ends x86/power/64: Use __pa() for physical address computation PM / sleep: Update some system sleep documentation

PM / hibernate: Fix rtree_next_node() to avoid walking off list ends

2016-08-16T11:16:36Z

rtree_next_node() walks the linked list of leaf nodes to find the next block of pages in the struct memory_bitmap. If it walks off the end of the list of nodes, it walks the list of memory zones to find the next region of memory. If it walks off the end of the list of zones, it returns false. This leaves the struct bm_position's node and zone pointers pointing at their respective struct list_heads in struct mem_zone_bm_rtree. memory_bm_find_bit() uses struct bm_position's node and zone pointers to avoid walking lists and trees if the next bit appears in the same node/zone. It handles these values being stale. Swap rtree_next_node()s 'step then test' to 'test-next then step', this means if we reach the end of memory we return false and leave the node and zone pointers as they were. This fixes a panic on resume using AMD Seattle with 64K pages: [ 6.868732] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 6.875753] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 6.896453] PM: Using 3 thread(s) for decompression. [ 6.896453] PM: Loading and decompressing image data (5339 pages)... [ 7.318890] PM: Image loading progress: 0% [ 7.323395] Unable to handle kernel paging request at virtual address 00800040 [ 7.330611] pgd = ffff000008df0000 [ 7.334003] [00800040] *pgd=00000083fffe0003, *pud=00000083fffe0003, *pmd=00000083fffd0003, *pte=0000000000000000 [ 7.344266] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 7.349825] Modules linked in: [ 7.352871] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W I 4.8.0-rc1 #4737 [ 7.360512] Hardware name: AMD Overdrive/Supercharger/Default string, BIOS ROD1002C 04/08/2016 [ 7.369109] task: ffff8003c0220000 task.stack: ffff8003c0280000 [ 7.375020] PC is at set_bit+0x18/0x30 [ 7.378758] LR is at memory_bm_set_bit+0x24/0x30 [ 7.383362] pc : [] lr : [] pstate: 60000045 [ 7.390743] sp : ffff8003c0283b00 [ 7.473551] [ 7.475031] Process swapper/0 (pid: 1, stack limit = 0xffff8003c0280020) [ 7.481718] Stack: (0xffff8003c0283b00 to 0xffff8003c0284000) [ 7.800075] Call trace: [ 7.887097] [] set_bit+0x18/0x30 [ 7.891876] [] duplicate_memory_bitmap.constprop.38+0x54/0x70 [ 7.899172] [] snapshot_write_next+0x22c/0x47c [ 7.905166] [] load_image_lzo+0x754/0xa88 [ 7.910725] [] swsusp_read+0x144/0x230 [ 7.916025] [] load_image_and_restore+0x58/0x90 [ 7.922105] [] software_resume+0x2f0/0x338 [ 7.927752] [] do_one_initcall+0x38/0x11c [ 7.933314] [] kernel_init_freeable+0x14c/0x1ec [ 7.939395] [] kernel_init+0x10/0xfc [ 7.944520] [] ret_from_fork+0x10/0x40 [ 7.949820] Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22) [ 7.955909] ---[ end trace 0024a5986e6ff323 ]--- [ 7.960529] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Here struct mem_zone_bm_rtree's start_pfn has been returned instead of struct rtree_node's addr as the node/zone pointers are corrupt after we walked off the end of the lists during mark_unsafe_pages(). This behaviour was exposed by commit 6dbecfd345a6 ("PM / hibernate: Simplify mark_unsafe_pages()"), which caused mark_unsafe_pages() to call duplicate_memory_bitmap(), which uses memory_bm_find_bit() after walking off the end of the memory bitmap. Fixes: 3a20cb177961 (PM / Hibernate: Implement position keeping in radix tree) Signed-off-by: James Morse [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki

Merge branches 'pm-sleep' and 'pm-cpufreq'

2016-08-12T20:53:58Z

* pm-sleep: PM / hibernate: Restore processor state before using per-CPU variables x86/power/64: Always create temporary identity mapping correctly * pm-cpufreq: cpufreq: powernv: Fix crash in gpstate_timer_handler()