user/sven/linux.git/kernel/power, branch v5.4.133

PM: EM: postpone creating the debugfs dir till fs_initcall

2021-03-30T12:35:28Z

[ Upstream commit fb9d62b27ab1e07d625591549c314b7d406d21df ] The debugfs directory '/sys/kernel/debug/energy_model' is needed before the Energy Model registration can happen. With the recent change in debugfs subsystem it's not allowed to create this directory at early stage (core_initcall). Thus creating this directory would fail. Postpone the creation of the EM debug dir to later stage: fs_initcall. It should be safe since all clients: CPUFreq drivers, Devfreq drivers will be initialized in later stages. The custom debug log below prints the time of creation the EM debug dir at fs_initcall and successful registration of EMs at later stages. [ 1.505717] energy_model: creating rootdir [ 3.698307] cpu cpu0: EM: created perf domain [ 3.709022] cpu cpu1: EM: created perf domain Fixes: 56348560d495 ("debugfs: do not attempt to create a new file before the filesystem is initalized") Reported-by: Ionela Voinescu Signed-off-by: Lukasz Luba Reviewed-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: hibernate: flush swap writer after marking

2021-02-03T22:25:57Z

commit fef9c8d28e28a808274a18fbd8cc2685817fd62a upstream. Flush the swap writer after, not before, marking the files, to ensure the signature is properly written. Fixes: 6f612af57821 ("PM / Hibernate: Group swap ops") Signed-off-by: Laurent Badel Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: hibernate: remove the bogus call to get_gendisk() in software_resume()

2020-10-29T08:58:04Z

[ Upstream commit 428805c0c5e76ef643b1fbc893edfb636b3d8aef ] get_gendisk grabs a reference on the disk and file operation, so this code will leak both of them while having absolutely no use for the gendisk itself. This effectively reverts commit 2df83fa4bce421f ("PM / Hibernate: Use get_gendisk to verify partition if resume_file is integer format") Signed-off-by: Christoph Hellwig Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: hibernate: Freeze kernel threads in software_resume()

2020-05-06T06:15:09Z

commit 2351f8d295ed63393190e39c2f7c1fee1a80578f upstream. Currently the kernel threads are not frozen in software_resume(), so between dpm_suspend_start(PMSG_QUIESCE) and resume_target_kernel(), system_freezable_power_efficient_wq can still try to submit SCSI commands and this can cause a panic since the low level SCSI driver (e.g. hv_storvsc) has quiesced the SCSI adapter and can not accept any SCSI commands: https://lkml.org/lkml/2020/4/10/47 At first I posted a fix (https://lkml.org/lkml/2020/4/21/1318) trying to resolve the issue from hv_storvsc, but with the help of Bart Van Assche, I realized it's better to fix software_resume(), since this looks like a generic issue, not only pertaining to SCSI. Cc: All applicable Signed-off-by: Dexuan Cui Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: PM: s2idle: Avoid possible race related to the EC GPE

2020-02-19T18:52:56Z

commit e3728b50cd9be7d4b1469447cdf1feb93e3b7adb upstream. It is theoretically possible for the ACPI EC GPE to be set after the s2idle_ops->wake() called from s2idle_loop() has returned and before the subsequent pm_wakeup_pending() check is carried out. If that happens, the resulting wakeup event will cause the system to resume even though it may be a spurious one. To avoid that race, first make the ->wake() callback in struct platform_s2idle_ops return a bool value indicating whether or not to let the system resume and rearrange s2idle_loop() to use that value instad of the direct pm_wakeup_pending() call if ->wake() is present. Next, rework acpi_s2idle_wake() to process EC events and check pm_wakeup_pending() before re-arming the SCI for system wakeup to prevent it from triggering prematurely and add comments to that function to explain the rationale for the new code flow. Fixes: 56b991849009 ("PM: sleep: Simplify suspend-to-idle control flow") Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: hibernate: fix crashes with init_on_free=1

2020-01-29T15:45:25Z

commit 18451f9f9e5810b8bd1245c5ae166f257e0e2b9d upstream. Upon resuming from hibernation, free pages may contain stale data from the kernel that initiated the resume. This breaks the invariant inflicted by init_on_free=1 that freed pages must be zeroed. To deal with this problem, make clear_free_pages() also clear the free pages when init_on_free is enabled. Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Reported-by: Johannes Stezenbach Signed-off-by: Alexander Potapenko Cc: 5.3+ # 5.3+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM / hibernate: memory_bm_find_bit(): Tighten node optimisation

2020-01-09T09:19:51Z

[ Upstream commit da6043fe85eb5ec621e34a92540735dcebbea134 ] When looking for a bit by number we make use of the cached result from the preceding lookup to speed up operation. Firstly we check if the requested pfn is within the cached zone and if not lookup the new zone. We then check if the offset for that pfn falls within the existing cached node. This happens regardless of whether the node is within the zone we are now scanning. With certain memory layouts it is possible for this to false trigger creating a temporary alias for the pfn to a different bit. This leads the hibernation code to free memory which it was never allocated with the expected fallout. Ensure the zone we are scanning matches the cached zone before considering the cached node. Deep thanks go to Andrea for many, many, many hours of hacking and testing that went into cornering this bug. Reported-by: Andrea Righi Tested-by: Andrea Righi Signed-off-by: Andy Whitcroft Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: QoS: Invalidate frequency QoS requests after removal

2019-11-20T09:46:42Z

Switching cpufreq drivers (or switching operation modes of the intel_pstate driver from "active" to "passive" and vice versa) does not work on some x86 systems with ACPI after commit 3000ce3c52f8 ("cpufreq: Use per-policy frequency QoS"), because the ACPI _PPC and thermal code uses the same frequency QoS request object for a given CPU every time a cpufreq driver is registered and freq_qos_remove_request() does not invalidate the request after removing it from its QoS list, so freq_qos_add_request() complains and fails when that request is passed to it again. Fix the issue by modifying freq_qos_remove_request() to clear the qos and type fields of the frequency request pointed to by its argument after removing it from its QoS list so as to invalidate it. Fixes: 3000ce3c52f8 ("cpufreq: Use per-policy frequency QoS") Reported-and-tested-by: Doug Smythies Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar

PM: QoS: Introduce frequency QoS

2019-10-21T00:05:21Z

Introduce frequency QoS, based on the "raw" low-level PM QoS, to represent min and max frequency requests and aggregate constraints. The min and max frequency requests are to be represented by struct freq_qos_request objects and the aggregate constraints are to be represented by struct freq_constraints objects. The latter are expected to be initialized with the help of freq_constraints_init(). The freq_qos_read_value() helper is defined to retrieve the aggregate constraints values from a given struct freq_constraints object and there are the freq_qos_add_request(), freq_qos_update_request() and freq_qos_remove_request() helpers to manipulate the min and max frequency requests. It is assumed that the the helpers will not run concurrently with each other for the same struct freq_qos_request object, so if that may be the case, their uses must ensure proper synchronization between them (e.g. through locking). In addition, freq_qos_add_notifier() and freq_qos_remove_notifier() are provided to add and remove notifiers that will trigger on aggregate constraint changes to and from a given struct freq_constraints object, respectively. Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar

PM: sleep: include for pm_wq

2019-10-10T09:11:56Z

Include the for the definition of pm_wq to avoid the following warning: kernel/power/main.c:890:25: warning: symbol 'pm_wq' was not declared. Should it be static? Signed-off-by: Ben Dooks Signed-off-by: Rafael J. Wysocki