user/sven/linux.git/kernel/power, branch v5.4.292

PM: hibernate: Add error handling for syscore_suspend()

2025-03-13T11:42:59Z

[ Upstream commit e20a70c572539a486dbd91b225fa6a194a5e2122 ] In hibernation_platform_enter(), the code did not check the return value of syscore_suspend(), potentially leading to a situation where syscore_resume() would be called even if syscore_suspend() failed. This could cause unpredictable behavior or system instability. Modify the code sequence in question to properly handle errors returned by syscore_suspend(). If an error occurs in the suspend path, the code now jumps to label 'Enable_irqs' skipping the syscore_resume() call and only enabling interrupts after setting the system state to SYSTEM_RUNNING. Fixes: 40dc166cb5dd ("PM / Core: Introduce struct syscore_ops for core subsystems PM") Signed-off-by: Wentao Liang Link: https://patch.msgid.link/20250119143205.2103-1-vulab@iscas.ac.cn [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: suspend: Set mem_sleep_current during kernel command line setup

2024-04-13T10:51:24Z

[ Upstream commit 9bc4ffd32ef8943f5c5a42c9637cfd04771d021b ] psci_init_system_suspend() invokes suspend_set_ops() very early during bootup even before kernel command line for mem_sleep_default is setup. This leads to kernel command line mem_sleep_default=s2idle not working as mem_sleep_current gets changed to deep via suspend_set_ops() and never changes back to s2idle. Set mem_sleep_current along with mem_sleep_default during kernel command line setup as default suspend mode. Fixes: faf7ec4a92c0 ("drivers: firmware: psci: add system suspend support") CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Maulik Shah Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: hibernate: Enforce ordering during image compression/decompression

2024-02-23T07:24:48Z

commit 71cd7e80cfde548959952eac7063aeaea1f2e1c6 upstream. An S4 (suspend to disk) test on the LoongArch 3A6000 platform sometimes fails with the following error messaged in the dmesg log: Invalid LZO compressed length That happens because when compressing/decompressing the image, the synchronization between the control thread and the compress/decompress/crc thread is based on a relaxed ordering interface, which is unreliable, and the following situation may occur: CPU 0 CPU 1 save_image_lzo lzo_compress_threadfn atomic_set(&d->stop, 1); atomic_read(&data[thr].stop) data[thr].cmp = data[thr].cmp_len; WRITE data[thr].cmp_len Then CPU0 gets a stale cmp_len and writes it to disk. During resume from S4, wrong cmp_len is loaded. To maintain data consistency between the two threads, use the acquire/release variants of atomic set and read operations. Fixes: 081a9d043c98 ("PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image") Cc: All applicable Signed-off-by: Hongchen Zhang Co-developed-by: Weihao Li Signed-off-by: Weihao Li [ rjw: Subject rewrite and changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: hibernate: Clean up sync_read handling in snapshot_write_next()

2023-11-28T16:50:19Z

commit d08970df1980476f27936e24d452550f3e9e92e1 upstream. In snapshot_write_next(), sync_read is set and unset in three different spots unnecessiarly. As a result there is a subtle bug where the first page after the meta data has been loaded unconditionally sets sync_read to 0. If this first PFN was actually a highmem page, then the returned buffer will be the global "buffer," and the page needs to be loaded synchronously. That is, I'm not sure we can always assume the following to be safe: handle->buffer = get_buffer(&orig_bm, &ca); handle->sync_read = 0; Because get_buffer() can call get_highmem_page_buffer() which can return 'buffer'. The easiest way to address this is just set sync_read before snapshot_write_next() returns if handle->buffer == buffer. Signed-off-by: Brian Geffon Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem") Cc: All applicable [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: hibernate: Use __get_safe_page() rather than touching the list

2023-11-28T16:50:19Z

commit f0c7183008b41e92fa676406d87f18773724b48b upstream. We found at least one situation where the safe pages list was empty and get_buffer() would gladly try to use a NULL pointer. Signed-off-by: Brian Geffon Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem") Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: hibernate: Fix mistake in kerneldoc comment

2023-01-18T10:40:53Z

[ Upstream commit 6e5d7300cbe7c3541bc31f16db3e9266e6027b4b ] The actual maximum image size formula in hibernate_preallocate_memory() is as follows: max_size = (count - (size + PAGES_FOR_IO)) / 2 - 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE); but the one in the kerneldoc comment of the function is different and incorrect. Fixes: ddeb64870810 ("PM / Hibernate: Add sysfs knob to control size of memory for drivers") Signed-off-by: xiongxin [ rjw: Subject and changelog rewrite ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: hibernate: Allow hybrid sleep to work with s2idle

2022-11-03T14:56:55Z

[ Upstream commit 85850af4fc47132f3f2f0dd698b90f67906600b4 ] Hybrid sleep is currently hardcoded to only operate with S3 even on systems that might not support it. Instead of assuming this mode is what the user wants to use, for hybrid sleep follow the setting of `mem_sleep_current` which will respect mem_sleep_default kernel command line and policy decisions made by the presence of the FADT low power idle bit. Fixes: 81d45bdf8913 ("PM / hibernate: Untangle power_down()") Reported-and-tested-by: kolAflash Link: https://bugzilla.kernel.org/show_bug.cgi?id=216574 Signed-off-by: Mario Limonciello Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: hibernate: defer device probing when resuming from hibernation

2022-08-25T09:17:32Z

[ Upstream commit 8386c414e27caba8501119948e9551e52b527f59 ] syzbot is reporting hung task at misc_open() [1], for there is a race window of AB-BA deadlock which involves probe_count variable. Currently wait_for_device_probe() from snapshot_open() from misc_open() can sleep forever with misc_mtx held if probe_count cannot become 0. When a device is probed by hub_event() work function, probe_count is incremented before the probe function starts, and probe_count is decremented after the probe function completed. There are three cases that can prevent probe_count from dropping to 0. (a) A device being probed stopped responding (i.e. broken/malicious hardware). (b) A process emulating a USB device using /dev/raw-gadget interface stopped responding for some reason. (c) New device probe requests keeps coming in before existing device probe requests complete. The phenomenon syzbot is reporting is (b). A process which is holding system_transition_mutex and misc_mtx is waiting for probe_count to become 0 inside wait_for_device_probe(), but the probe function which is called from hub_event() work function is waiting for the processes which are blocked at mutex_lock(&misc_mtx) to respond via /dev/raw-gadget interface. This patch mitigates (b) by deferring wait_for_device_probe() from snapshot_open() to snapshot_write() and snapshot_ioctl(). Please note that the possibility of (b) remains as long as any thread which is emulating a USB device via /dev/raw-gadget interface can be blocked by uninterruptible blocking operations (e.g. mutex_lock()). Please also note that (a) and (c) are not addressed. Regarding (c), we should change the code to wait for only one device which contains the image for resuming from hibernation. I don't know how to address (a), for use of timeout for wait_for_device_probe() might result in loss of user data in the image. Maybe we should require the userland to wait for the image device before opening /dev/snapshot interface. Link: https://syzkaller.appspot.com/bug?extid=358c9ab4c93da7b7238c [1] Reported-by: syzbot Signed-off-by: Tetsuo Handa Tested-by: syzbot Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: suspend: fix return value of __setup handler

2022-04-15T12:18:05Z

[ Upstream commit 7a64ca17e4dd50d5f910769167f3553902777844 ] If an invalid option is given for "test_suspend=

PM: hibernate: fix __setup handler error handling

2022-04-15T12:18:05Z

[ Upstream commit ba7ffcd4c4da374b0f64666354eeeda7d3827131 ] If an invalid value is used in "resumedelay=", it is silently ignored. Add a warning message and then let the __setup handler return 1 to indicate that the kernel command line option has been handled. Fixes: 317cf7e5e85e3 ("PM / hibernate: convert simple_strtoul to kstrtoul") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin