user/sven/linux.git/kernel/power, branch v6.6.93

PM: hibernate: Add error handling for syscore_suspend()

2025-02-08T08:52:29Z

[ Upstream commit e20a70c572539a486dbd91b225fa6a194a5e2122 ] In hibernation_platform_enter(), the code did not check the return value of syscore_suspend(), potentially leading to a situation where syscore_resume() would be called even if syscore_suspend() failed. This could cause unpredictable behavior or system instability. Modify the code sequence in question to properly handle errors returned by syscore_suspend(). If an error occurs in the suspend path, the code now jumps to label 'Enable_irqs' skipping the syscore_resume() call and only enabling interrupts after setting the system state to SYSTEM_RUNNING. Fixes: 40dc166cb5dd ("PM / Core: Introduce struct syscore_ops for core subsystems PM") Signed-off-by: Wentao Liang Link: https://patch.msgid.link/20250119143205.2103-1-vulab@iscas.ac.cn [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: s2idle: Make sure CPUs will wakeup directly on resume

2024-04-17T09:19:26Z

commit 3c89a068bfd0698a5478f4cf39493595ef757d5e upstream. s2idle works like a regular suspend with freezing processes and freezing devices. All CPUs except the control CPU go into idle. Once this is completed the control CPU kicks all other CPUs out of idle, so that they reenter the idle loop and then enter s2idle state. The control CPU then issues an swait() on the suspend state and therefore enters the idle loop as well. Due to being kicked out of idle, the other CPUs leave their NOHZ states, which means the tick is active and the corresponding hrtimer is programmed to the next jiffie. On entering s2idle the CPUs shut down their local clockevent device to prevent wakeups. The last CPU which enters s2idle shuts down its local clockevent and freezes timekeeping. On resume, one of the CPUs receives the wakeup interrupt, unfreezes timekeeping and its local clockevent and starts the resume process. At that point all other CPUs are still in s2idle with their clockevents switched off. They only resume when they are kicked by another CPU or after resuming devices and then receiving a device interrupt. That means there is no guarantee that all CPUs will wakeup directly on resume. As a consequence there is no guarantee that timers which are queued on those CPUs and should expire directly after resume, are handled. Also timer list timers which are remotely queued to one of those CPUs after resume will not result in a reprogramming IPI as the tick is active. Queueing a hrtimer will also not result in a reprogramming IPI because the first hrtimer event is already in the past. The recent introduction of the timer pull model (7ee988770326 ("timers: Implement the hierarchical pull model")) amplifies this problem, if the current migrator is one of the non woken up CPUs. When a non pinned timer list timer is queued and the queuing CPU goes idle, it relies on the still suspended migrator CPU to expire the timer which will happen by chance. The problem exists since commit 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path"). There the cpuidle_pause() call which in turn invoked a wakeup for all idle CPUs was moved to a later point in the resume process. This might not be reached or reached very late because it waits on a timer of a still suspended CPU. Address this by kicking all CPUs out of idle after the control CPU returns from swait() so that they resume their timers and restore consistent system state. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218641 Fixes: 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path") Signed-off-by: Anna-Maria Behnsen Reviewed-by: Thomas Gleixner Tested-by: Mario Limonciello Cc: 5.16+ # 5.16+ Acked-by: Peter Zijlstra (Intel) Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: suspend: Set mem_sleep_current during kernel command line setup

2024-04-03T13:28:22Z

[ Upstream commit 9bc4ffd32ef8943f5c5a42c9637cfd04771d021b ] psci_init_system_suspend() invokes suspend_set_ops() very early during bootup even before kernel command line for mem_sleep_default is setup. This leads to kernel command line mem_sleep_default=s2idle not working as mem_sleep_current gets changed to deep via suspend_set_ops() and never changes back to s2idle. Set mem_sleep_current along with mem_sleep_default during kernel command line setup as default suspend mode. Fixes: faf7ec4a92c0 ("drivers: firmware: psci: add system suspend support") CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Maulik Shah Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: hibernate: Enforce ordering during image compression/decompression

2024-02-01T00:18:49Z

commit 71cd7e80cfde548959952eac7063aeaea1f2e1c6 upstream. An S4 (suspend to disk) test on the LoongArch 3A6000 platform sometimes fails with the following error messaged in the dmesg log: Invalid LZO compressed length That happens because when compressing/decompressing the image, the synchronization between the control thread and the compress/decompress/crc thread is based on a relaxed ordering interface, which is unreliable, and the following situation may occur: CPU 0 CPU 1 save_image_lzo lzo_compress_threadfn atomic_set(&d->stop, 1); atomic_read(&data[thr].stop) data[thr].cmp = data[thr].cmp_len; WRITE data[thr].cmp_len Then CPU0 gets a stale cmp_len and writes it to disk. During resume from S4, wrong cmp_len is loaded. To maintain data consistency between the two threads, use the acquire/release variants of atomic set and read operations. Fixes: 081a9d043c98 ("PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image") Cc: All applicable Signed-off-by: Hongchen Zhang Co-developed-by: Weihao Li Signed-off-by: Weihao Li [ rjw: Subject rewrite and changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: hibernate: Clean up sync_read handling in snapshot_write_next()

2023-11-28T17:20:02Z

commit d08970df1980476f27936e24d452550f3e9e92e1 upstream. In snapshot_write_next(), sync_read is set and unset in three different spots unnecessiarly. As a result there is a subtle bug where the first page after the meta data has been loaded unconditionally sets sync_read to 0. If this first PFN was actually a highmem page, then the returned buffer will be the global "buffer," and the page needs to be loaded synchronously. That is, I'm not sure we can always assume the following to be safe: handle->buffer = get_buffer(&orig_bm, &ca); handle->sync_read = 0; Because get_buffer() can call get_highmem_page_buffer() which can return 'buffer'. The easiest way to address this is just set sync_read before snapshot_write_next() returns if handle->buffer == buffer. Signed-off-by: Brian Geffon Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem") Cc: All applicable [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: hibernate: Use __get_safe_page() rather than touching the list

2023-11-28T17:20:02Z

commit f0c7183008b41e92fa676406d87f18773724b48b upstream. We found at least one situation where the safe pages list was empty and get_buffer() would gladly try to use a NULL pointer. Signed-off-by: Brian Geffon Fixes: 8357376d3df2 ("[PATCH] swsusp: Improve handling of highmem") Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: hibernate: Fix copying the zero bitmap to safe pages

2023-10-04T18:43:44Z

The following crash is observed 100% of the time during resume from the hibernation on a x86 QEMU system. [ 12.931887] ? __die_body+0x1a/0x60 [ 12.932324] ? page_fault_oops+0x156/0x420 [ 12.932824] ? search_exception_tables+0x37/0x50 [ 12.933389] ? fixup_exception+0x21/0x300 [ 12.933889] ? exc_page_fault+0x69/0x150 [ 12.934371] ? asm_exc_page_fault+0x26/0x30 [ 12.934869] ? get_buffer.constprop.0+0xac/0x100 [ 12.935428] snapshot_write_next+0x7c/0x9f0 [ 12.935929] ? submit_bio_noacct_nocheck+0x2c2/0x370 [ 12.936530] ? submit_bio_noacct+0x44/0x2c0 [ 12.937035] ? hib_submit_io+0xa5/0x110 [ 12.937501] load_image+0x83/0x1a0 [ 12.937919] swsusp_read+0x17f/0x1d0 [ 12.938355] ? create_basic_memory_bitmaps+0x1b7/0x240 [ 12.938967] load_image_and_restore+0x45/0xc0 [ 12.939494] software_resume+0x13c/0x180 [ 12.939994] resume_store+0xa3/0x1d0 The commit being fixed introduced a bug in copying the zero bitmap to safe pages. A temporary bitmap is allocated with PG_ANY flag in prepare_image() to make a copy of zero bitmap after the unsafe pages are marked. Freeing this temporary bitmap with PG_UNSAFE_KEEP later results in an inconsistent state of unsafe pages. Since free bit is left as is for this temporary bitmap after free, these pages are treated as unsafe pages when they are allocated again. This results in incorrect calculation of the number of pages pre-allocated for the image. nr_pages = (nr_zero_pages + nr_copy_pages) - nr_highmem - allocated_unsafe_pages; The allocate_unsafe_pages is estimated to be higher than the actual which results in running short of pages in safe_pages_list. Hence the crash is observed in get_buffer() due to NULL pointer access of safe_pages_list. Fix this issue by creating the temporary zero bitmap from safe pages (free bit not set) so that the corresponding free bits can be cleared while freeing this bitmap. Fixes: 005e8dddd497 ("PM: hibernate: don't store zero pages in the image file") Suggested-by:: Brian Geffon Signed-off-by: Pavankumar Kondeti Reviewed-by: Brian Geffon Signed-off-by: Rafael J. Wysocki

PM: hibernate: Fix the exclusive get block device in test_resume mode

2023-09-12T09:45:15Z

Commit 5904de0d735b ("PM: hibernate: Do not get block device exclusively in test_resume mode") fixes a hibernation issue under test_resume mode. That commit is supposed to open the block device in non-exclusive mode when in test_resume. However the code does the opposite, which is against its description. In summary, the swap device is only opened exclusively by swsusp_check() with its corresponding *close(), and must be in non test_resume mode. This is to avoid the race condition that different processes scribble the device at the same time. All the other cases should use non-exclusive mode. Fix it by really disabling exclusive mode under test_resume. Fixes: 5904de0d735b ("PM: hibernate: Do not get block device exclusively in test_resume mode") Closes: https://lore.kernel.org/lkml/000000000000761f5f0603324129@google.com/ Reported-by: Pengfei Xu Signed-off-by: Chen Yu Tested-by: Chenzhou Feng Signed-off-by: Rafael J. Wysocki

PM: hibernate: Rename function parameter from snapshot_test to exclusive

2023-09-12T09:45:15Z

Several functions reply on snapshot_test to decide whether to open the resume device exclusively. However there is no strict connection between the snapshot_test and the open mode. Rename the 'snapshot_test' input parameter to 'exclusive' to better reflect the use case. No functional change is expected. Signed-off-by: Chen Yu Signed-off-by: Rafael J. Wysocki

Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2023-09-01T16:38:00Z

Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.6-rc1. Lots of cleanups in here this cycle, and some driver updates. Short summary is: - Jiri's continued work to make the tty code and apis be a bit more sane with regards to modern kernel coding style and types - cpm_uart driver updates - n_gsm updates and fixes - meson driver updates - sc16is7xx driver updates - 8250 driver updates for different hardware types - qcom-geni driver fixes - tegra serial driver change - stm32 driver updates - synclink_gt driver cleanups - tty structure size reduction All of these have been in linux-next this week with no reported issues. The last bit of cleanups from Jiri and the tty structure size reduction came in last week, a bit late but as they were just style changes and size reductions, I figured they should get into this merge cycle so that others can work on top of them with no merge conflicts" * tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) tty: shrink the size of struct tty_struct by 40 bytes tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw() tty: n_tty: extract ECHO_OP processing to a separate function tty: n_tty: unify counts to size_t tty: n_tty: use u8 for chars and flags tty: n_tty: simplify chars_in_buffer() tty: n_tty: remove unsigned char casts from character constants tty: n_tty: move newline handling to a separate function tty: n_tty: move canon handling to a separate function tty: n_tty: use MASK() for masking out size bits tty: n_tty: make n_tty_data::num_overrun unsigned tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun() tty: n_tty: use 'num' for writes' counts tty: n_tty: use output character directly tty: n_tty: make flow of n_tty_receive_buf_common() a bool Revert "tty: serial: meson: Add a earlycon for the T7 SoC" Documentation: devices.txt: Fix minors for ttyCPM* Documentation: devices.txt: Remove ttySIOC* Documentation: devices.txt: Remove ttyIOC* serial: 8250_bcm7271: improve bcm7271 8250 port ...