user/sven/linux.git/kernel/printk, branch v5.15.157

printk: Update @console_may_schedule in console_trylock_spinning()

2024-04-10T14:18:47Z

[ Upstream commit 8076972468584d4a21dab9aa50e388b3ea9ad8c7 ] console_trylock_spinning() may takeover the console lock from a schedulable context. Update @console_may_schedule to make sure it reflects a trylock acquire. Reported-by: Mukesh Ojha Closes: https://lore.kernel.org/lkml/20240222090538.23017-1-quic_mojha@quicinc.com Fixes: dbdda842fe96 ("printk: Add console owner and waiter logic to load balance console writes") Signed-off-by: John Ogness Reviewed-by: Mukesh Ojha Reviewed-by: Petr Mladek Link: https://lore.kernel.org/r/875xybmo2z.fsf@jogness.linutronix.de Signed-off-by: Petr Mladek Signed-off-by: Sasha Levin

serial: Lock console when calling into driver before registration

2024-04-10T14:18:38Z

[ Upstream commit 801410b26a0e8b8a16f7915b2b55c9528b69ca87 ] During the handoff from earlycon to the real console driver, we have two separate drivers operating on the same device concurrently. In the case of the 8250 driver these concurrent accesses cause problems due to the driver's use of banked registers, controlled by LCR.DLAB. It is possible for the setup(), config_port(), pm() and set_mctrl() callbacks to set DLAB, which can cause the earlycon code that intends to access TX to instead access DLL, leading to missed output and corruption on the serial line due to unintended modifications to the baud rate. In particular, for setup() we have: univ8250_console_setup() -> serial8250_console_setup() -> uart_set_options() -> serial8250_set_termios() -> serial8250_do_set_termios() -> serial8250_do_set_divisor() For config_port() we have: serial8250_config_port() -> autoconfig() For pm() we have: serial8250_pm() -> serial8250_do_pm() -> serial8250_set_sleep() For set_mctrl() we have (for some devices): serial8250_set_mctrl() -> omap8250_set_mctrl() -> __omap8250_set_mctrl() To avoid such problems, let's make it so that the console is locked during pre-registration calls to these callbacks, which will prevent the earlycon driver from running concurrently. Remove the partial solution to this problem in the 8250 driver that locked the console only during autoconfig_irq(), as this would result in a deadlock with the new approach. The console continues to be locked during autoconfig_irq() because it can only be called through uart_configure_port(). Although this patch introduces more locking than strictly necessary (and in particular it also locks during the call to rs485_config() which is not affected by this issue as far as I can tell), it follows the principle that it is the responsibility of the generic console code to manage the earlycon handoff by ensuring that earlycon and real console driver code cannot run concurrently, and not the individual drivers. Signed-off-by: Peter Collingbourne Reviewed-by: John Ogness Link: https://linux-review.googlesource.com/id/I7cf8124dcebf8618e6b2ee543fa5b25532de55d8 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240304214350.501253-1-pcc@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

printk/console: Split out code that enables default console

2024-04-10T14:18:38Z

[ Upstream commit ed758b30d541e9bf713cd58612a4414e57dc6d73 ] Put the code enabling a console by default into a separate function called try_enable_default_console(). Rename try_enable_new_console() to try_enable_preferred_console() to make the purpose of the different variants more clear. It is a code refactoring without any functional change. Signed-off-by: Petr Mladek Reviewed-by: Sergey Senozhatsky Link: https://lore.kernel.org/r/20211122132649.12737-2-pmladek@suse.com Stable-dep-of: 801410b26a0e ("serial: Lock console when calling into driver before registration") Signed-off-by: Sasha Levin

printk: Consolidate console deferred printing

2023-09-23T09:09:59Z

[ Upstream commit 696ffaf50e1f8dbc66223ff614473f945f5fb8d8 ] Printing to consoles can be deferred for several reasons: - explicitly with printk_deferred() - printk() in NMI context - recursive printk() calls The current implementation is not consistent. For printk_deferred(), irq work is scheduled twice. For NMI und recursive, panic CPU suppression and caller delays are not properly enforced. Correct these inconsistencies by consolidating the deferred printing code so that vprintk_deferred() is the top-level function for deferred printing and vprintk_emit() will perform whichever irq_work queueing is appropriate. Also add kerneldoc for wake_up_klogd() and defer_console_output() to clarify their differences and appropriate usage. Signed-off-by: John Ogness Reviewed-by: Sergey Senozhatsky Reviewed-by: Petr Mladek Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20230717194607.145135-6-john.ogness@linutronix.de Signed-off-by: Sasha Levin

printk: ringbuffer: Fix truncating buffer size min_t cast

2023-09-19T10:22:50Z

commit 53e9e33ede37a247d926db5e4a9e56b55204e66c upstream. If an output buffer size exceeded U16_MAX, the min_t(u16, ...) cast in copy_data() was causing writes to truncate. This manifested as output bytes being skipped, seen as %NUL bytes in pstore dumps when the available record size was larger than 65536. Fix the cast to no longer truncate the calculation. Cc: Petr Mladek Cc: Sergey Senozhatsky Cc: Steven Rostedt Cc: John Ogness Reported-by: Vijay Balakrishna Link: https://lore.kernel.org/lkml/d8bb1ec7-a4c5-43a2-9de0-9643a70b899f@linux.microsoft.com/ Fixes: b6cf8b3f3312 ("printk: add lockless ringbuffer") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook Tested-by: Vijay Balakrishna Tested-by: Guilherme G. Piccoli # Steam Deck Reviewed-by: Tyler Hicks (Microsoft) Tested-by: Tyler Hicks (Microsoft) Reviewed-by: John Ogness Reviewed-by: Sergey Senozhatsky Reviewed-by: Petr Mladek Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20230811054528.never.165-kees@kernel.org Signed-off-by: Greg Kroah-Hartman

kernel/printk/index.c: fix memory leak with using debugfs_lookup()

2023-03-11T12:57:32Z

[ Upstream commit 55bf243c514553e907efcf2bda92ba090eca8c64 ] When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Chris Down Cc: Petr Mladek Cc: Sergey Senozhatsky Cc: Steven Rostedt Cc: John Ogness Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman Reviewed-by: Sergey Senozhatsky Reviewed-by: John Ogness Reviewed-by: Petr Mladek Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20230202151411.2308576-1-gregkh@linuxfoundation.org Signed-off-by: Sasha Levin

printk: wake waiters for safe and NMI contexts

2022-06-09T08:22:49Z

[ Upstream commit 5341b93dea8c39d7612f7a227015d4b1d5cf30db ] When printk() is called from safe or NMI contexts, it will directly store the record (vprintk_store()) and then defer the console output. However, defer_console_output() only causes console printing and does not wake any waiters of new records. Wake waiters from defer_console_output() so that they also are aware of the new records from safe and NMI contexts. Fixes: 03fc7f9c99c1 ("printk/nmi: Prevent deadlock when accessing the main log buffer in NMI") Signed-off-by: John Ogness Reviewed-by: Petr Mladek Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220421212250.565456-6-john.ogness@linutronix.de Signed-off-by: Sasha Levin

printk: add missing memory barrier to wake_up_klogd()

2022-06-09T08:22:48Z

[ Upstream commit 1f5d783094cf28b4905f51cad846eb5d1db6673e ] It is important that any new records are visible to preparing waiters before the waker checks if the wait queue is empty. Otherwise it is possible that: - there are new records available - the waker sees an empty wait queue and does not wake - the preparing waiter sees no new records and begins to wait This is exactly the problem that the function description of waitqueue_active() warns about. Use wq_has_sleeper() instead of waitqueue_active() because it includes the necessary full memory barrier. Signed-off-by: John Ogness Reviewed-by: Petr Mladek Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220421212250.565456-4-john.ogness@linutronix.de Signed-off-by: Sasha Levin

printk: use atomic updates for klogd work

2022-06-09T08:22:48Z

[ Upstream commit 2ba3673d70178bf07fb75ff25c54bc478add4021 ] The per-cpu @printk_pending variable can be updated from sleepable contexts, such as: get_random_bytes() warn_unseeded_randomness() printk_deferred() defer_console_output() and can be updated from interrupt contexts, such as: handle_irq_event_percpu() __irq_wake_thread() wake_up_process() try_to_wake_up() select_task_rq() select_fallback_rq() printk_deferred() defer_console_output() and can be updated from NMI contexts, such as: vprintk() if (in_nmi()) defer_console_output() Therefore the atomic variant of the updating functions must be used. Replace __this_cpu_xchg() with this_cpu_xchg(). Replace __this_cpu_or() with this_cpu_or(). Reported-by: Sebastian Andrzej Siewior Signed-off-by: John Ogness Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/87iltld4ue.fsf@jogness.linutronix.de Signed-off-by: Sasha Levin

printk: fix return value of printk.devkmsg __setup handler

2022-04-08T12:23:19Z

[ Upstream commit b665eae7a788c5e2bc10f9ac3c0137aa0ad1fc97 ] If an invalid option value is used with "printk.devkmsg=", it is silently ignored. If a valid option value is used, it is honored but the wrong return value (0) is used, indicating that the command line option had an error and was not handled. This string is not added to init's environment strings due to init/main.c::unknown_bootoption() checking for a '.' in the boot option string and then considering that string to be an "Unused module parameter". Print a warning message if a bad option string is used. Always return 1 from the __setup handler to indicate that the command line option has been handled. Fixes: 750afe7babd1 ("printk: add kernel parameter to control writes to /dev/kmsg") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Borislav Petkov Cc: Andrew Morton Cc: Petr Mladek Cc: Sergey Senozhatsky Cc: Steven Rostedt Cc: John Ogness Reviewed-by: John Ogness Reviewed-by: Sergey Senozhatsky Reviewed-by: Petr Mladek Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220228220556.23484-1-rdunlap@infradead.org Signed-off-by: Sasha Levin