user/sven/linux.git/kernel/printk, branch v6.0.18

printk: do not wait for consoles when suspended

2022-07-15T08:52:11Z

The console_stop() and console_start() functions call pr_flush(). When suspending, these functions are called by the serial subsystem while the serial port is suspended. In this scenario, if there are any pending messages, a call to pr_flush() will always result in a timeout because the serial port cannot make forward progress. This causes longer suspend and resume times. Add a check in pr_flush() so that it will immediately timeout if the consoles are suspended. Fixes: 3b604ca81202 ("printk: add pr_flush()") Reported-by: Todd Brandt Signed-off-by: John Ogness Tested-by: Todd Brandt Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220715061042.373640-2-john.ogness@linutronix.de

Revert "printk: add functions to prefer direct printing"

2022-06-23T16:41:40Z

This reverts commit 2bb2b7b57f81255c13f4395ea911d6bdc70c9fe2. The testing of 5.19 release candidates revealed missing synchronization between early and regular console functionality. It would be possible to start the console kthreads later as a workaround. But it is clear that console lock serialized console drivers between each other. It opens a big area of possible problems that were not considered by people involved in the development and review. printk() is crucial for debugging kernel issues and console output is very important part of it. The number of consoles is huge and a proper review would take some time. As a result it need to be reverted for 5.19. Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220623145157.21938-7-pmladek@suse.com

Revert "printk: add kthread console printers"

2022-06-23T16:41:40Z

This reverts commit 09c5ba0aa2fcfdadb17d045c3ee6f86d69270df7. This reverts commit b87f02307d3cfbda768520f0687c51ca77e14fc3. The testing of 5.19 release candidates revealed missing synchronization between early and regular console functionality. It would be possible to start the console kthreads later as a workaround. But it is clear that console lock serialized console drivers between each other. It opens a big area of possible problems that were not considered by people involved in the development and review. printk() is crucial for debugging kernel issues and console output is very important part of it. The number of consoles is huge and a proper review would take some time. As a result it need to be reverted for 5.19. Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220623145157.21938-6-pmladek@suse.com

Revert "printk: extend console_lock for per-console locking"

2022-06-23T16:41:40Z

This reverts commit 8e274732115f63c1d09136284431b3555bd5cc56. The testing of 5.19 release candidates revealed missing synchronization between early and regular console functionality. It would be possible to start the console kthreads later as a workaround. But it is clear that console lock serialized console drivers between each other. It opens a big area of possible problems that were not considered by people involved in the development and review. printk() is crucial for debugging kernel issues and console output is very important part of it. The number of consoles is huge and a proper review would take some time. As a result it need to be reverted for 5.19. Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220623145157.21938-5-pmladek@suse.com

Revert "printk: remove @console_locked"

2022-06-23T16:41:40Z

This reverts commit ab406816fca009349b89cbde885daf68a8c77e33. The testing of 5.19 release candidates revealed missing synchronization between early and regular console functionality. It would be possible to start the console kthreads later as a workaround. But it is clear that console lock serialized console drivers between each other. It opens a big area of possible problems that were not considered by people involved in the development and review. printk() is crucial for debugging kernel issues and console output is very important part of it. The number of consoles is huge and a proper review would take some time. As a result it need to be reverted for 5.19. Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220623145157.21938-4-pmladek@suse.com

Revert "printk: Block console kthreads when direct printing will be required"

2022-06-23T16:41:40Z

This reverts commit c3230283e2819a69dad2cf7a63143fde8bab8b5c. The testing of 5.19 release candidates revealed missing synchronization between early and regular console functionality. It would be possible to start the console kthreads later as a workaround. But it is clear that console lock serialized console drivers between each other. It opens a big area of possible problems that were not considered by people involved in the development and review. printk() is crucial for debugging kernel issues and console output is very important part of it. The number of consoles is huge and a proper review would take some time. As a result it need to be reverted for 5.19. Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220623145157.21938-3-pmladek@suse.com

Revert "printk: Wait for the global console lock when the system is going down"

2022-06-23T16:41:40Z

This reverts commit b87f02307d3cfbda768520f0687c51ca77e14fc3. The testing of 5.19 release candidates revealed missing synchronization between early and regular console functionality. It would be possible to start the console kthreads later as a workaround. But it is clear that console lock serialized console drivers between each other. It opens a big area of possible problems that were not considered by people involved in the development and review. printk() is crucial for debugging kernel issues and console output is very important part of it. The number of consoles is huge and a proper review would take some time. As a result it need to be reverted for 5.19. Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220623145157.21938-2-pmladek@suse.com

printk: Wait for the global console lock when the system is going down

2022-06-15T20:04:15Z

There are reports that the console kthreads block the global console lock when the system is going down, for example, reboot, panic. First part of the solution was to block kthreads in these problematic system states so they stopped handling newly added messages. Second part of the solution is to wait when for the kthreads when they are actively printing. It solves the problem when a message was printed before the system entered the problematic state and the kthreads managed to step in. A busy waiting has to be used because panic() can be called in any context and in an unknown state of the scheduler. There must be a timeout because the kthread might get stuck or sleeping and never release the lock. The timeout 10s is an arbitrary value inspired by the softlockup timeout. Link: https://lore.kernel.org/r/20220610205038.GA3050413@paulmck-ThinkPad-P17-Gen-1 Link: https://lore.kernel.org/r/CAMdYzYpF4FNTBPZsEFeWRuEwSies36QM_As8osPWZSr2q-viEA@mail.gmail.com Signed-off-by: Petr Mladek Tested-by: Paul E. McKenney Link: https://lore.kernel.org/r/20220615162805.27962-3-pmladek@suse.com

printk: Block console kthreads when direct printing will be required

2022-06-15T20:03:38Z

There are known situations when the console kthreads are not reliable or does not work in principle, for example, early boot, panic, shutdown. For these situations there is the direct (legacy) mode when printk() tries to get console_lock() and flush the messages directly. It works very well during the early boot when the console kthreads are not available at all. It gets more complicated in the other situations when console kthreads might be actively printing and block console_trylock() in printk(). The same problem is in the legacy code as well. Any console_lock() owner could block console_trylock() in printk(). It is solved by a trick that the current console_lock() owner is responsible for printing all pending messages. It is actually the reason why there is the risk of softlockups and why the console kthreads were introduced. The console kthreads use the same approach. They are responsible for printing the messages by definition. So that they handle the messages anytime when they are awake and see new ones. The global console_lock is available when there is nothing to do. It should work well when the problematic context is correctly detected and printk() switches to the direct mode. But it seems that it is not enough in practice. There are reports that the messages are not printed during panic() or shutdown() even though printk() tries to use the direct mode here. The problem seems to be that console kthreads become active in these situation as well. They steel the job before other CPUs are stopped. Then they are stopped in the middle of the job and block the global console_lock. First part of the solution is to block console kthreads when the system is in a problematic state and requires the direct printk() mode. Link: https://lore.kernel.org/r/20220610205038.GA3050413@paulmck-ThinkPad-P17-Gen-1 Link: https://lore.kernel.org/r/CAMdYzYpF4FNTBPZsEFeWRuEwSies36QM_As8osPWZSr2q-viEA@mail.gmail.com Suggested-by: John Ogness Tested-by: Paul E. McKenney Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220615162805.27962-2-pmladek@suse.com

Revert "printk: wake up all waiters"

2022-05-27T11:04:46Z

This reverts commit 938ba4084abcf6fdd21d9078513c52f8fb9b00d0. The wait queue @log_wait never has exclusive waiters, so there is no need to use wake_up_interruptible_all(). Using wake_up_interruptible() was the correct function to wake all waiters. Since there are no exclusive waiters, erroneously changing wake_up_interruptible() to wake_up_interruptible_all() did not result in any behavior change. However, using wake_up_interruptible_all() on a wait queue without exclusive waiters is fundamentally wrong. Go back to using wake_up_interruptible() to wake all waiters. Signed-off-by: John Ogness Acked-by: Steven Rostedt (Google) Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20220526203056.81123-1-john.ogness@linutronix.de