user/sven/linux.git/kernel/rcu, branch v4.14.87

rcu: Make need_resched() respond to urgent RCU-QS needs

2018-12-01T08:43:00Z

commit 92aa39e9dc77481b90cbef25e547d66cab901496 upstream. The per-CPU rcu_dynticks.rcu_urgent_qs variable communicates an urgent need for an RCU quiescent state from the force-quiescent-state processing within the grace-period kthread to context switches and to cond_resched(). Unfortunately, such urgent needs are not communicated to need_resched(), which is sometimes used to decide when to invoke cond_resched(), for but one example, within the KVM vcpu_run() function. As of v4.15, this can result in synchronize_sched() being delayed by up to ten seconds, which can be problematic, to say nothing of annoying. This commit therefore checks rcu_dynticks.rcu_urgent_qs from within rcu_check_callbacks(), which is invoked from the scheduling-clock interrupt handler. If the current task is not an idle task and is not executing in usermode, a context switch is forced, and either way, the rcu_dynticks.rcu_urgent_qs variable is set to false. If the current task is an idle task, then RCU's dyntick-idle code will detect the quiescent state, so no further action is required. Similarly, if the task is executing in usermode, other code in rcu_check_callbacks() and its called functions will report the corresponding quiescent state. Reported-by: Marius Hillenbrand Reported-by: David Woodhouse Suggested-by: Peter Zijlstra Signed-off-by: Paul E. McKenney [ paulmck: Backported to make patch apply cleanly on older versions. ] Tested-by: Marius Hillenbrand Cc: # 4.12.x - 4.19.x Signed-off-by: Greg Kroah-Hartman

rcu: Call touch_nmi_watchdog() while printing stall warnings

2018-05-30T05:52:39Z

[ Upstream commit 3caa973b7a260e7a2a69edc94c300ab9c65148c3 ] When RCU stall warning triggers, it can print out a lot of messages while holding spinlocks. If the console device is slow (e.g. an actual or IPMI serial console), it may end up triggering NMI hard lockup watchdog like the following.

rcu: Export init_rcu_head() and destroy_rcu_head() to GPL modules

2018-02-16T19:23:11Z

commit 156baec39732f025dc778e00da95fc10d6e45885 upstream. Use of init_rcu_head() and destroy_rcu_head() from modules results in the following build-time error with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y: ERROR: "init_rcu_head" [drivers/scsi/scsi_mod.ko] undefined! ERROR: "destroy_rcu_head" [drivers/scsi/scsi_mod.ko] undefined! This commit therefore adds EXPORT_SYMBOL_GPL() for each to allow them to be used by GPL-licensed kernel modules. Reported-by: Bart Van Assche Reported-by: Stephen Rothwell Signed-off-by: Paul E. McKenney Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

rcu: Fix up pending cbs check in rcu_prepare_for_idle

2017-11-24T07:37:04Z

commit 135bd1a230bb69a68c9808a7d25467318900b80a upstream. The pending-callbacks check in rcu_prepare_for_idle() is backwards. It should accelerate if there are pending callbacks, but the check rather uselessly accelerates only if there are no callbacks. This commit therefore inverts this check. Fixes: 15fecf89e46a ("srcu: Abstract multi-tail callback list handling") Signed-off-by: Neeraj Upadhyay Signed-off-by: Paul E. McKenney Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

doc: Fix various RCU docbook comment-header problems

2017-10-20T02:26:11Z

Because many of RCU's files have not been included into docbook, a number of errors have accumulated. This commit fixes them. Signed-off-by: Paul E. McKenney Signed-off-by: Linus Torvalds

Merge tag 'trace-v4.14-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2017-10-04T15:34:01Z

Pull tracing fixlets from Steven Rostedt: "Two updates: - A memory fix with left over code from spliting out ftrace_ops and function graph tracer, where the function graph tracer could reset the trampoline pointer, leaving the old trampoline not to be freed (memory leak). - The update to Paul's patch that added the unnecessary READ_ONCE(). This removes the unnecessary READ_ONCE() instead of having to rebase the branch to update the patch that added it" * tag 'trace-v4.14-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: rcu: Remove extraneous READ_ONCE()s from rcu_irq_{enter,exit}() ftrace: Fix kmemleak in unregister_ftrace_graph

rcu: Remove extraneous READ_ONCE()s from rcu_irq_{enter,exit}()

2017-10-03T14:27:32Z

The read of ->dynticks_nmi_nesting in rcu_irq_enter() and rcu_irq_exit() is currently protected with READ_ONCE(). However, this protection is unnecessary because (1) ->dynticks_nmi_nesting is updated only by the current CPU, (2) Although NMI handlers can update this field, they reset it back to its old value before return, and (3) Interrupts are disabled, so nothing else can modify it. The value of ->dynticks_nmi_nesting is thus effectively constant, and so no protection is required. This commit therefore removes the READ_ONCE() protection from these two accesses. Link: http://lkml.kernel.org/r/20170926031902.GA2074@linux.vnet.ibm.com Reported-by: Linus Torvalds Signed-off-by: Paul E. McKenney Signed-off-by: Steven Rostedt (VMware)

Merge tag 'trace-v4.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2017-09-25T22:22:31Z

Pull tracing fixes from Steven Rostedt: "Stack tracing and RCU has been having issues with each other and lockdep has been pointing out constant problems. The changes have been going into the stack tracer, but it has been discovered that the problem isn't with the stack tracer itself, but it is with calling save_stack_trace() from within the internals of RCU. The stack tracer is the one that can trigger the issue the easiest, but examining the problem further, it could also happen from a WARN() in the wrong place, or even if an NMI happened in this area and it did an rcu_read_lock(). The critical area is where RCU is not watching. Which can happen while going to and from idle, or bringing up or taking down a CPU. The final fix was to put the protection in kernel_text_address() as it is the one that requires RCU to be watching while doing the stack trace. To make this work properly, Paul had to allow rcu_irq_enter() happen after rcu_nmi_enter(). This should have been done anyway, since an NMI can page fault (reading vmalloc area), and a page fault triggers rcu_irq_enter(). One patch is just a consolidation of code so that the fix only needed to be done in one location" * tag 'trace-v4.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Remove RCU work arounds from stack tracer extable: Enable RCU if it is not watching in kernel_text_address() extable: Consolidate *kernel_text_address() functions rcu: Allow for page faults in NMI handlers

rcu: Allow for page faults in NMI handlers

2017-09-23T20:49:42Z

A number of architecture invoke rcu_irq_enter() on exception entry in order to allow RCU read-side critical sections in the exception handler when the exception is from an idle or nohz_full CPU. This works, at least unless the exception happens in an NMI handler. In that case, rcu_nmi_enter() would already have exited the extended quiescent state, which would mean that rcu_irq_enter() would (incorrectly) cause RCU to think that it is again in an extended quiescent state. This will in turn result in lockdep splats in response to later RCU read-side critical sections. This commit therefore causes rcu_irq_enter() and rcu_irq_exit() to take no action if there is an rcu_nmi_enter() in effect, thus avoiding the unscheduled return to RCU quiescent state. This in turn should make the kernel safe for on-demand RCU voyeurism. Link: http://lkml.kernel.org/r/20170922211022.GA18084@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: 0be964be0 ("module: Sanitize RCU usage and locking") Reported-by: Steven Rostedt Signed-off-by: Paul E. McKenney Signed-off-by: Steven Rostedt (VMware)