user/sven/linux.git/kernel/resource.c, branch v3.18.40

kernel/resource.c: fix muxed resource handling in __request_region()

2016-04-14T00:44:38Z

[ Upstream commit 59ceeaaf355fa0fb16558ef7c24413c804932ada ] In __request_region, if a conflict with a BUSY and MUXED resource is detected, then the caller goes to sleep and waits for the resource to be released. A pointer on the conflicting resource is kept. At wake-up this pointer is used as a parent to retry to request the region. A first problem is that this pointer might well be invalid (if for example the conflicting resource have already been freed). Another problem is that the next call to __request_region() fails to detect a remaining conflict. The previously conflicting resource is passed as a parameter and __request_region() will look for a conflict among the children of this resource and not at the resource itself. It is likely to succeed anyway, even if there is still a conflict. Instead, the parent of the conflicting resource should be passed to __request_region(). As a fix, this patch doesn't update the parent resource pointer in the case we have to wait for a muxed region right after. Reported-and-tested-by: Vincent Pelletier Signed-off-by: Simon Guinot Tested-by: Vincent Donnefort Cc: stable@kernel.org Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

x86: optimize resource lookups for ioremap

2014-10-14T00:18:22Z

We have a large university system in the UK that is experiencing very long delays modprobing the driver for a specific I/O device. The delay is from 8-10 minutes per device and there are 31 devices in the system. This 4 to 5 hour delay in starting up those I/O devices is very much a burden on the customer. There are two causes for requiring a restart/reload of the drivers. First is periodic preventive maintenance (PM) and the second is if any of the devices experience a fatal error. Both of these trigger this excessively long delay in bringing the system back up to full capability. The problem was tracked down to a very slow IOREMAP operation and the excessively long ioresource lookup to insure that the user is not attempting to ioremap RAM. These patches provide a speed up to that function. The modprobe time appears to be affected quite a bit by previous activity on the ioresource list, which I suspect is due to cache preloading. While the overall improvement is impacted by other overhead of starting the devices, this drastically improves the modprobe time. Also our system is considerably smaller so the percentages gained will not be the same. Best case improvement with the modprobe on our 20 device smallish system was from 'real 5m51.913s' to 'real 0m18.275s'. This patch (of 2): Since the ioremap operation is verifying that the specified address range is NOT RAM, it will search the entire ioresource list if the condition is true. To make matters worse, it does this one 4k page at a time. For a 128M BAR region this is 32 passes to determine the entire region does not contain any RAM addresses. This patch provides another resource lookup function, region_is_ram, that searches for the entire region specified, verifying that it is completely contained within the resource region. If it is found, then it is checked to be RAM or not, within a single pass. The return result reflects if it was found or not (-1), and whether it is RAM (1) or not (0). This allows the caller to fallback to the previous page by page search if it was not found. [akpm@linux-foundation.org: fix spellos and typos in comment] Signed-off-by: Mike Travis Acked-by: Alex Thorlton Reviewed-by: Cliff Wickman Cc: Thomas Gleixner Cc: H. Peter Anvin Cc: Mark Salter Cc: Dave Young Cc: Rik van Riel Cc: Peter Zijlstra Cc: Mel Gorman Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2014-10-09T19:03:49Z

Pull PCI updates from Bjorn Helgaas: "The interesting things here are: - Turn on Config Request Retry Status Software Visibility. This caused hangs last time, but we included a fix this time. - Rework PCI device configuration to use _HPP/_HPX more aggressively - Allow PCI devices to be put into D3cold during system suspend - Add arm64 PCI support - Add APM X-Gene host bridge driver - Add TI Keystone host bridge driver - Add Xilinx AXI host bridge driver More detailed summary: Enumeration - Check Vendor ID only for Config Request Retry Status (Rajat Jain) - Enable Config Request Retry Status when supported (Rajat Jain) - Add generic domain handling (Catalin Marinas) - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado) Resource management - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu) - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Move _HPP & _HPX handling into core (Bjorn Helgaas) - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas) - Apply _HPP/_HPX to display devices (Bjorn Helgaas) - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas) - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas) - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas) - Fix wait time in pciehp timeout message (Yinghai Lu) - Add more pciehp Slot Control debug output (Yinghai Lu) - Stop disabling pciehp notifications during init (Yinghai Lu) MSI - Remove arch_msi_check_device() (Alexander Gordeev) - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev) - Move D0 check into pci_msi_check_device() (Alexander Gordeev) - Remove unused kobject from struct msi_desc (Yijing Wang) - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang) - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang) - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang) - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang) - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang) Power management - Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki) - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki) AER - Add additional AER error strings (Gong Chen) - Make standalone includable (Thierry Reding) Virtualization - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson) - Add ACS quirk for Intel 10G NICs (Alex Williamson) - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp) - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson) - Add device flag helpers (Ethan Zhao) - Assume all Mellanox devices have broken INTx masking (Gavin Shan) Generic host bridge driver - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau) - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau) - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau) - Fix the conversion of IO ranges into IO resources (Liviu Dudau) - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau) - Add support for parsing PCI host bridge resources from DT (Liviu Dudau) - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau) - Add arm64 architectural support for PCI (Liviu Dudau) APM X-Gene - Add APM X-Gene PCIe driver (Tanmay Inamdar) - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar) Freescale i.MX6 - Probe in module_init(), not fs_initcall() (Lucas Stach) - Delay enabling reference clock for SS until it stabilizes (Tim Harvey) Marvell MVEBU - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni) NVIDIA Tegra - Make sure the PCIe PLL is really reset (Eric Yuen) - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang) - Fix extended configuration space mapping (Peter Daifuku) - Implement resource hierarchy (Thierry Reding) - Clear CLKREQ# enable on port disable (Thierry Reding) - Add Tegra124 support (Thierry Reding) ST Microelectronics SPEAr13xx - Pass config resource through reg property (Pratyush Anand) Synopsys DesignWare - Use NULL instead of false (Fabio Estevam) - Parse bus-range property from devicetree (Lucas Stach) - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach) - Remove pci_assign_unassigned_resources() (Lucas Stach) - Check private_data validity in single place (Lucas Stach) - Setup and clear exactly one MSI at a time (Lucas Stach) - Remove open-coded bitmap operations (Lucas Stach) - Fix configuration base address when using 'reg' (Minghuan Lian) - Fix IO resource end address calculation (Minghuan Lian) - Rename get_msi_data() to get_msi_addr() (Minghuan Lian) - Add get_msi_data() to pcie_host_ops (Minghuan Lian) - Add support for v3.65 hardware (Murali Karicheri) - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand) TI Keystone - Add TI Keystone PCIe driver (Murali Karicheri) - Limit MRSS for all downstream devices (Murali Karicheri) - Assume controller is already in RC mode (Murali Karicheri) - Set device ID based on SoC to support multiple ports (Murali Karicheri) Xilinx AXI - Add Xilinx AXI PCIe driver (Srikanth Thokala) - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter) Miscellaneous - Clean up whitespace (Quentin Lambert) - Remove assignments from "if" conditions (Quentin Lambert) - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri) - x86: Mark DMI tables as initialization data (Mathias Krause) - x86: Move __init annotation to the correct place (Mathias Krause) - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause) - x86: Constify pci_mmcfg_probes[] array (Mathias Krause) - x86: Mark PCI BIOS initialization code as such (Mathias Krause) - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya) - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)" * tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits) arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: Add ACS quirk for AMD A88X southbridge devices PCI: xgene: Add APM X-Gene PCIe driver PCI: designware: Remove open-coded bitmap operations PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() ... Conflicts: arch/arm64/boot/dts/apm-storm.dtsi

resources: Add device-managed request/release_resource()

2014-09-04T20:41:43Z

Provide device-managed implementations of the request_resource() and release_resource() functions. Upon failure to request a resource, the new devm_request_resource() function will output an error message for consistent error reporting. Signed-off-by: Thierry Reding Signed-off-by: Bjorn Helgaas Acked-by: Tejun Heo

resource: fix the case of null pointer access

2014-08-29T23:28:15Z

Richard and Daniel reported that UML is broken due to changes to resource traversal functions. Problem is that iomem_resource.child can be null and new code does not consider that possibility. Old code used a for loop and that loop will not even execute if p was null. Revert back to for() loop logic and bail out if p is null. I also moved sibling_only check out of resource_lock. There is no reason to keep it inside the lock. Following is backtrace of the UML crash. RIP: 0033:[<0000000060039b9f>] RSP: 0000000081459da0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000219b3fff RCX: 000000006010d1d9 RDX: 0000000000000001 RSI: 00000000602dfb94 RDI: 0000000081459df8 RBP: 0000000081459de0 R08: 00000000601b59f4 R09: ffffffff0000ff00 R10: ffffffff0000ff00 R11: 0000000081459e88 R12: 0000000081459df8 R13: 00000000219b3fff R14: 00000000602dfb94 R15: 0000000000000000 Kernel panic - not syncing: Segfault with no mm CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-10454-g58d08e3 #13 Stack: 00000000 000080d0 81459df0 219b3fff 81459e70 6010d1d9 ffffffff 6033e010 81459e50 6003a269 81459e30 00000000 Call Trace: [<6010d1d9>] ? kclist_add_private+0x0/0xe7 [<6003a269>] walk_system_ram_range+0x61/0xb7 [<6000e859>] ? proc_kcore_init+0x0/0xf1 [<6010d574>] kcore_update_ram+0x4c/0x168 [<6010d72e>] ? kclist_add+0x0/0x2e [<6000e943>] proc_kcore_init+0xea/0xf1 [<6000e859>] ? proc_kcore_init+0x0/0xf1 [<6000e859>] ? proc_kcore_init+0x0/0xf1 [<600189f0>] do_one_initcall+0x13c/0x204 [<6004ca46>] ? parse_args+0x1df/0x2e0 [<6004c82d>] ? parameq+0x0/0x3a [<601b5990>] ? strcpy+0x0/0x18 [<60001e1a>] kernel_init_freeable+0x240/0x31e [<6026f1c0>] kernel_init+0x12/0x148 [<60019fad>] new_thread_handler+0x81/0xa3 Fixes 8c86e70acead629aacb4a ("resource: provide new functions to walk through resources"). Reported-by: Daniel Walter Tested-by: Richard Weinberger Tested-by: Toralf Förster Tested-by: Daniel Walter Signed-off-by: Vivek Goyal Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

resource: provide new functions to walk through resources

2014-08-08T22:57:32Z

I have added two more functions to walk through resources. Currently walk_system_ram_range() deals with pfn and /proc/iomem can contain partial pages. By dealing in pfn, callback function loses the info that last page of a memory range is a partial page and not the full page. So I implemented walk_system_ram_res() which returns u64 values to callback functions and now it properly return start and end address. walk_system_ram_range() uses find_next_system_ram() to find the next ram resource. This in turn only travels through siblings of top level child and does not travers through all the nodes of the resoruce tree. I also need another function where I can walk through all the resources, for example figure out where "GART" aperture is. Figure out where ACPI memory is. So I wrote another function walk_iomem_res() which walks through all /proc/iomem resources and returns matches as asked by caller. Caller can specify "name" of resource, start and end and flags. Got rid of find_next_system_ram_res() and instead implemented more generic find_next_iomem_res() which can be used to traverse top level children only based on an argument. Signed-off-by: Vivek Goyal Cc: Yinghai Lu Cc: Borislav Petkov Cc: Michael Kerrisk Cc: Eric Biederman Cc: H. Peter Anvin Cc: Matthew Garrett Cc: Greg Kroah-Hartman Cc: Dave Young Cc: WANG Chao Cc: Baoquan He Cc: Andy Lutomirski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

resources: Clarify sanity check message

2014-05-23T16:47:21Z

The resource map sanity check message is a bit confusing. Change it to be more readable: -resource map sanity check conflict: 0xfed10000 0xfed15fff 0xfed10000 0xfed13fff pnp 00:01 +resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than pnp 00:01 [mem 0xfed10000-0xfed13fff] Signed-off-by: Bjorn Helgaas

kernel/resource.c: make reallocate_resource() static

2014-04-03T23:21:07Z

sparse says: kernel/resource.c:518:5: warning: symbol 'reallocate_resource' was not declared. Should it be static? Signed-off-by: Daeseok Youn Reviewed-by: Yasuaki Ishimatsu Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

resources: Set type in __request_region()

2014-03-19T21:00:16Z

We don't set the type (I/O, memory, etc.) of resources added by __request_region(), which leads to confusing messages like this: address space collision: [io 0x1000-0x107f] conflicts with ACPI CPU throttle [??? 0x00001010-0x00001015 flags 0x80000000] Set the type of a new resource added by __request_region() (used by request_region() and request_mem_region()) to the type of its parent. This makes the resource tree internally consistent and fixes messages like the above, where the ACPI CPU throttle resource really is an I/O port region, but request_region() didn't fill in the type, so %pR didn't know how to print it. Sample dmesg showing the issue at the link below. Link: https://bugzilla.kernel.org/show_bug.cgi?id=71611 Reported-by: Paul Bolle Signed-off-by: Bjorn Helgaas

resource: Add resource_contains()

2014-02-26T21:42:09Z

We have two identical copies of resource_contains() already, and more places that could use it. This moves it to ioport.h where it can be shared. resource_contains(struct resource *r1, struct resource *r2) returns true iff r1 and r2 are the same type (most callers already checked this separately) and the r1 address range completely contains r2. In addition, the new resource_contains() checks that both r1 and r2 have addresses assigned to them. If a resource is IORESOURCE_UNSET, it doesn't have a valid address and can't contain or be contained by another resource. Some callers already check this or for res->start. No functional change. Signed-off-by: Bjorn Helgaas