user/sven/linux.git/kernel/sched/Makefile, branch v5.4.63

psi: pressure stall information for CPU, memory, and IO

2018-10-26T23:26:32Z

When systems are overcommitted and resources become contended, it's hard to tell exactly the impact this has on workload productivity, or how close the system is to lockups and OOM kills. In particular, when machines work multiple jobs concurrently, the impact of overcommit in terms of latency and throughput on the individual job can be enormous. In order to maximize hardware utilization without sacrificing individual job health or risk complete machine lockups, this patch implements a way to quantify resource pressure in the system. A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that expose the percentage of time the system is stalled on CPU, memory, or IO, respectively. Stall states are aggregate versions of the per-task delay accounting delays: cpu: some tasks are runnable but not executing on a CPU memory: tasks are reclaiming, or waiting for swapin or thrashing cache io: tasks are waiting for io completions These percentages of walltime can be thought of as pressure percentages, and they give a general sense of system health and productivity loss incurred by resource overcommit. They can also indicate when the system is approaching lockup scenarios and OOMs. To do this, psi keeps track of the task states associated with each CPU and samples the time they spend in stall states. Every 2 seconds, the samples are averaged across CPUs - weighted by the CPUs' non-idle time to eliminate artifacts from unused CPUs - and translated into percentages of walltime. A running average of those percentages is maintained over 10s, 1m, and 5m periods (similar to the loadaverage). [hannes@cmpxchg.org: doc fixlet, per Randy] Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org [hannes@cmpxchg.org: code optimization] Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org [hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter] Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org [hannes@cmpxchg.org: fix build] Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org Signed-off-by: Johannes Weiner Acked-by: Peter Zijlstra (Intel) Tested-by: Daniel Drake Tested-by: Suren Baghdasaryan Cc: Christopher Lameter Cc: Ingo Molnar Cc: Johannes Weiner Cc: Mike Galbraith Cc: Peter Enderborg Cc: Randy Dunlap Cc: Shakeel Butt Cc: Tejun Heo Cc: Vinayak Menon Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

sched/pelt: Move PELT related code in a dedicated file

2018-07-15T21:51:20Z

We want to track rt_rq's utilization as a part of the estimation of the whole rq's utilization. This is necessary because rt tasks can steal utilization to cfs tasks and make them lighter than they are. As we want to use the same load tracking mecanism for both and prevent useless dependency between cfs and rt code, PELT code is moved in a dedicated file. Signed-off-by: Vincent Guittot Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Morten.Rasmussen@arm.com Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: claudio@evidence.eu.com Cc: daniel.lezcano@linaro.org Cc: dietmar.eggemann@arm.com Cc: joel@joelfernandes.org Cc: juri.lelli@redhat.com Cc: luca.abeni@santannapisa.it Cc: patrick.bellasi@arm.com Cc: quentin.perret@arm.com Cc: rjw@rjwysocki.net Cc: valentin.schneider@arm.com Cc: viresh.kumar@linaro.org Link: http://lkml.kernel.org/r/1530200714-4504-2-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar

sched/idle: Merge kernel/sched/idle.c and kernel/sched/idle_task.c

2018-03-04T11:39:33Z

Merge these two small .c modules as they implement two aspects of idle task handling. Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

Merge branch 'linus' into sched/core, to pick up fixes

2017-11-08T09:17:15Z

Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL

2017-10-27T07:55:28Z

Split the housekeeping config from CONFIG_NO_HZ_FULL. This way we finally separate the isolation code from NOHZ. Although a dependency to CONFIG_NO_HZ_FULL remains for now, while the housekeeping code still deals with NOHZ internals. Signed-off-by: Frederic Weisbecker Acked-by: Thomas Gleixner Cc: Chris Metcalf Cc: Christoph Lameter Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Rik van Riel Cc: Wanpeng Li Link: http://lkml.kernel.org/r/1509072159-31808-8-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar

sched/isolation: Move housekeeping related code to its own file

2017-10-27T07:55:24Z

The housekeeping code is currently tied to the NOHZ code. As we are planning to make housekeeping independent from it, start with moving the relevant code to its own file. Signed-off-by: Frederic Weisbecker Acked-by: Thomas Gleixner Acked-by: Paul E. McKenney Cc: Chris Metcalf Cc: Christoph Lameter Cc: Linus Torvalds Cc: Luiz Capitulino Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Rik van Riel Cc: Wanpeng Li Link: http://lkml.kernel.org/r/1509072159-31808-2-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar

membarrier: Provide expedited private command

2017-08-17T14:28:05Z

Implement MEMBARRIER_CMD_PRIVATE_EXPEDITED with IPIs using cpumask built from all runqueues for which current thread's mm is the same as the thread calling sys_membarrier. It executes faster than the non-expedited variant (no blocking). It also works on NOHZ_FULL configurations. Scheduler-wise, it requires a memory barrier before and after context switching between processes (which have different mm). The memory barrier before context switch is already present. For the barrier after context switch: * Our TSO archs can do RELEASE without being a full barrier. Look at x86 spin_unlock() being a regular STORE for example. But for those archs, all atomics imply smp_mb and all of them have atomic ops in switch_mm() for mm_cpumask(), and on x86 the CR3 load acts as a full barrier. * From all weakly ordered machines, only ARM64 and PPC can do RELEASE, the rest does indeed do smp_mb(), so there the spin_unlock() is a full barrier and we're good. * ARM64 has a very heavy barrier in switch_to(), which suffices. * PPC just removed its barrier from switch_to(), but appears to be talking about adding something to switch_mm(). So add a smp_mb__after_unlock_lock() for now, until this is settled on the PPC side. Changes since v3: - Properly document the memory barriers provided by each architecture. Changes since v2: - Address comments from Peter Zijlstra, - Add smp_mb__after_unlock_lock() after finish_lock_switch() in finish_task_switch() to add the memory barrier we need after storing to rq->curr. This is much simpler than the previous approach relying on atomic_dec_and_test() in mmdrop(), which actually added a memory barrier in the common case of switching between userspace processes. - Return -EINVAL when MEMBARRIER_CMD_SHARED is used on a nohz_full kernel, rather than having the whole membarrier system call returning -ENOSYS. Indeed, CMD_PRIVATE_EXPEDITED is compatible with nohz_full. Adapt the CMD_QUERY mask accordingly. Changes since v1: - move membarrier code under kernel/sched/ because it uses the scheduler runqueue, - only add the barrier when we switch from a kernel thread. The case where we switch from a user-space thread is already handled by the atomic_dec_and_test() in mmdrop(). - add a comment to mmdrop() documenting the requirement on the implicit memory barrier. CC: Peter Zijlstra CC: Paul E. McKenney CC: Boqun Feng CC: Andrew Hunter CC: Maged Michael CC: gromer@google.com CC: Avi Kivity CC: Benjamin Herrenschmidt CC: Paul Mackerras CC: Michael Ellerman Signed-off-by: Mathieu Desnoyers Signed-off-by: Paul E. McKenney Tested-by: Dave Watson

Merge branch 'WIP.sched/core' into sched/core

2017-06-20T10:28:21Z

Conflicts: kernel/sched/Makefile Pick up the waitqueue related renames - it didn't get much feedback, so it appears to be uncontroversial. Famous last words? ;-) Signed-off-by: Ingo Molnar

sched/wait: Split out the wait_bit*() APIs from into

2017-06-20T10:19:09Z

The wait_bit*() types and APIs are mixed into wait.h, but they are a pretty orthogonal extension of wait-queues. Furthermore, only about 50 kernel files use these APIs, while over 1000 use the regular wait-queue functionality. So clean up the main wait.h by moving the wait-bit functionality out of it, into a separate .h and .c file: include/linux/wait_bit.h for types and APIs kernel/sched/wait_bit.c for the implementation Update all header dependencies. This reduces the size of wait.h rather significantly, by about 30%. Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar