user/sven/linux.git/kernel/time/hrtimer.c, branch v3.18.109

hrtimer: Ensure POSIX compliance (relative CLOCK_REALTIME hrtimers)

2018-03-03T09:17:06Z

commit 48d0c9becc7f3c66874c100c126459a9da0fdced upstream. The POSIX specification defines that relative CLOCK_REALTIME timers are not affected by clock modifications. Those timers have to use CLOCK_MONOTONIC to ensure POSIX compliance. The introduction of the additional HRTIMER_MODE_PINNED mode broke this requirement for pinned timers. There is no user space visible impact because user space timers are not using pinned mode, but for consistency reasons this needs to be fixed. Check whether the mode has the HRTIMER_MODE_REL bit set instead of comparing with HRTIMER_MODE_ABS. Signed-off-by: Anna-Maria Gleixner Cc: Christoph Hellwig Cc: John Stultz Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: keescook@chromium.org Fixes: 597d0275736d ("timers: Framework for identifying pinned timers") Link: http://lkml.kernel.org/r/20171221104205.7269-7-anna-maria@linutronix.de Signed-off-by: Ingo Molnar Cc: Mike Galbraith Signed-off-by: Greg Kroah-Hartman

hrtimer: Reset hrtimer cpu base proper on CPU hotplug

2018-01-31T13:46:15Z

commit d5421ea43d30701e03cadc56a38854c36a8b4433 upstream. The hrtimer interrupt code contains a hang detection and mitigation mechanism, which prevents that a long delayed hrtimer interrupt causes a continous retriggering of interrupts which prevent the system from making progress. If a hang is detected then the timer hardware is programmed with a certain delay into the future and a flag is set in the hrtimer cpu base which prevents newly enqueued timers from reprogramming the timer hardware prior to the chosen delay. The subsequent hrtimer interrupt after the delay clears the flag and resumes normal operation. If such a hang happens in the last hrtimer interrupt before a CPU is unplugged then the hang_detected flag is set and stays that way when the CPU is plugged in again. At that point the timer hardware is not armed and it cannot be armed because the hang_detected flag is still active, so nothing clears that flag. As a consequence the CPU does not receive hrtimer interrupts and no timers expire on that CPU which results in RCU stalls and other malfunctions. Clear the flag along with some other less critical members of the hrtimer cpu base to ensure starting from a clean state when a CPU is plugged in. Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the root cause of that hard to reproduce heisenbug. Once understood it's trivial and certainly justifies a brown paperbag. Fixes: 41d2e4949377 ("hrtimer: Tune hrtimer_interrupt hang logic") Reported-by: Paul E. McKenney Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Sebastian Sewior Cc: Anna-Maria Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos [bigeasy: backport to v3.18, drop ->next_timer it was introduced later] Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman

ktime: Fix ktime_divns to do signed division

2015-06-09T17:43:50Z

[ Upstream commit f7bcb70ebae0dcdb5a2d859b09e4465784d99029 ] It was noted that the 32bit implementation of ktime_divns() was doing unsigned division and didn't properly handle negative values. And when a ktime helper was changed to utilize ktime_divns, it caused a regression on some IR blasters. See the following bugzilla for details: https://bugzilla.redhat.com/show_bug.cgi?id=1200353 This patch fixes the problem in ktime_divns by checking and preserving the sign bit, and then reapplying it if appropriate after the division, it also changes the return type to a s64 to make it more obvious this is expected. Nicolas also pointed out that negative dividers would cause infinite loops on 32bit systems, negative dividers is unlikely for users of this function, but out of caution this patch adds checks for negative dividers for both 32-bit (BUG_ON) and 64-bit(WARN_ON) versions to make sure no such use cases creep in. [ tglx: Hand an u64 to do_div() to avoid the compiler warning ] Fixes: 166afb64511e 'ktime: Sanitize ktime_to_us/ms conversion' Reported-and-tested-by: Trevor Cordes Signed-off-by: John Stultz Acked-by: Nicolas Pitre Cc: Ingo Molnar Cc: Josh Boyer Cc: One Thousand Gnomes Cc: Link: http://lkml.kernel.org/r/1431118043-23452-1-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner Signed-off-by: Sasha Levin

ktime: Optimize ktime_divns for constant divisors

2015-06-09T17:43:49Z

[ Upstream commit 8b618628b2bf83512fc8df5e8672619d65adfdfb ] At least on ARM, do_div() is optimized to turn constant divisors into an inline multiplication by the reciprocal value at compile time. However this optimization is missed entirely whenever ktime_divns() is used and the slow out-of-line division code is used all the time. Let ktime_divns() use do_div() inline whenever the divisor is constant and small enough. This will make things like ktime_to_us() and ktime_to_ms() much faster. Cc: Arnd Bergmann Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Nicolas Pitre Acked-by: Arnd Bergmann Signed-off-by: Nicolas Pitre Signed-off-by: John Stultz Signed-off-by: Sasha Levin

hrtimer: Fix incorrect tai offset calculation for non high-res timer systems

2015-02-11T07:00:56Z

commit 2d926c15d629a13914ce3e5f26354f6a0ac99e70 upstream. I noticed some CLOCK_TAI timer test failures on one of my less-frequently used configurations. And after digging in I found in 76f4108892d9 (Cleanup hrtimer accessors to the timekepeing state), the hrtimer_get_softirq_time tai offset calucation was incorrectly rewritten, as the tai offset we return shold be from CLOCK_MONOTONIC, and not CLOCK_REALTIME. This results in CLOCK_TAI timers expiring early on non-highres capable machines. This patch fixes the issue, calculating the tai time properly from the monotonic base. Signed-off-by: John Stultz Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1423097126-10236-1-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu

2014-10-15T05:48:18Z

Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...

sched, cleanup, treewide: Remove set_current_state(TASK_RUNNING) after schedule()

2014-09-19T10:35:17Z

schedule(), io_schedule() and schedule_timeout() always return with TASK_RUNNING state set, so one more setting is unnecessary. (All places in patch are visible good, only exception is kiblnd_scheduler() from: drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c Its schedule() is one line above standard 3 lines of unified diff) No places where set_current_state() is used for mb(). Signed-off-by: Kirill Tkhai Signed-off-by: Peter Zijlstra (Intel) Link: http://lkml.kernel.org/r/1410529254.3569.23.camel@tkhai Cc: Alasdair Kergon Cc: Anil Belur Cc: Arnd Bergmann Cc: Dave Kleikamp Cc: David Airlie Cc: David Howells Cc: Dmitry Eremin Cc: Frank Blaschka Cc: Greg Kroah-Hartman Cc: Heiko Carstens Cc: Helge Deller Cc: Isaac Huang Cc: James E.J. Bottomley Cc: James E.J. Bottomley Cc: J. Bruce Fields Cc: Jeff Dike Cc: Jesper Nilsson Cc: Jiri Slaby Cc: Laura Abbott Cc: Liang Zhen Cc: Linus Torvalds Cc: Martin Schwidefsky Cc: Masaru Nomura Cc: Michael Opdenacker Cc: Mikael Starvik Cc: Mike Snitzer Cc: Neil Brown Cc: Oleg Drokin Cc: Peng Tao Cc: Richard Weinberger Cc: Robert Love Cc: Steven Rostedt Cc: Trond Myklebust Cc: Ursula Braun Cc: Zi Shen Lim Cc: devel@driverdev.osuosl.org Cc: dm-devel@redhat.com Cc: dri-devel@lists.freedesktop.org Cc: fcoe-devel@open-fcoe.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux390@de.ibm.com Cc: linux-afs@lists.infradead.org Cc: linux-cris-kernel@axis.com Cc: linux-kernel@vger.kernel.org Cc: linux-nfs@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-raid@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: qla2xxx-upstream@qlogic.com Cc: user-mode-linux-devel@lists.sourceforge.net Cc: user-mode-linux-user@lists.sourceforge.net Signed-off-by: Ingo Molnar

time: Convert a bunch of &__get_cpu_var introduced in the 3.16 merge period

2014-08-26T17:45:44Z

Signed-off-by: Christoph Lameter Signed-off-by: Tejun Heo

time: Replace __get_cpu_var uses

2014-08-26T17:45:44Z

Convert uses of __get_cpu_var for creating a address from a percpu offset to this_cpu_ptr. The two cases where get_cpu_var is used to actually access a percpu variable are changed to use this_cpu_read/raw_cpu_read. Reviewed-by: Thomas Gleixner Signed-off-by: Christoph Lameter Signed-off-by: Tejun Heo

time: Consolidate the time accessor prototypes

2014-07-23T17:17:54Z

Right now we have time related prototypes in 3 different header files. Move it to a single timekeeping header file and move the core internal stuff into a core private header. Signed-off-by: Thomas Gleixner Signed-off-by: John Stultz