user/sven/linux.git/kernel/time/hrtimer.c, branch v4.4.120

hrtimer: Ensure POSIX compliance (relative CLOCK_REALTIME hrtimers)

2018-03-03T09:19:41Z

commit 48d0c9becc7f3c66874c100c126459a9da0fdced upstream. The POSIX specification defines that relative CLOCK_REALTIME timers are not affected by clock modifications. Those timers have to use CLOCK_MONOTONIC to ensure POSIX compliance. The introduction of the additional HRTIMER_MODE_PINNED mode broke this requirement for pinned timers. There is no user space visible impact because user space timers are not using pinned mode, but for consistency reasons this needs to be fixed. Check whether the mode has the HRTIMER_MODE_REL bit set instead of comparing with HRTIMER_MODE_ABS. Signed-off-by: Anna-Maria Gleixner Cc: Christoph Hellwig Cc: John Stultz Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: keescook@chromium.org Fixes: 597d0275736d ("timers: Framework for identifying pinned timers") Link: http://lkml.kernel.org/r/20171221104205.7269-7-anna-maria@linutronix.de Signed-off-by: Ingo Molnar Cc: Mike Galbraith Signed-off-by: Greg Kroah-Hartman

hrtimer: Reset hrtimer cpu base proper on CPU hotplug

2018-01-31T11:06:12Z

commit d5421ea43d30701e03cadc56a38854c36a8b4433 upstream. The hrtimer interrupt code contains a hang detection and mitigation mechanism, which prevents that a long delayed hrtimer interrupt causes a continous retriggering of interrupts which prevent the system from making progress. If a hang is detected then the timer hardware is programmed with a certain delay into the future and a flag is set in the hrtimer cpu base which prevents newly enqueued timers from reprogramming the timer hardware prior to the chosen delay. The subsequent hrtimer interrupt after the delay clears the flag and resumes normal operation. If such a hang happens in the last hrtimer interrupt before a CPU is unplugged then the hang_detected flag is set and stays that way when the CPU is plugged in again. At that point the timer hardware is not armed and it cannot be armed because the hang_detected flag is still active, so nothing clears that flag. As a consequence the CPU does not receive hrtimer interrupts and no timers expire on that CPU which results in RCU stalls and other malfunctions. Clear the flag along with some other less critical members of the hrtimer cpu base to ensure starting from a clean state when a CPU is plugged in. Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the root cause of that hard to reproduce heisenbug. Once understood it's trivial and certainly justifies a brown paperbag. Fixes: 41d2e4949377 ("hrtimer: Tune hrtimer_interrupt hang logic") Reported-by: Paul E. McKenney Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Sebastian Sewior Cc: Anna-Maria Gleixner Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos Signed-off-by: Greg Kroah-Hartman

time: Avoid undefined behaviour in ktime_add_safe()

2018-01-31T11:06:08Z

commit 979515c5645830465739254abc1b1648ada41518 upstream. I ran into this: ================================================================================ UBSAN: Undefined behaviour in kernel/time/hrtimer.c:310:16 signed integer overflow: 9223372036854775807 + 50000 cannot be represented in type 'long long int' CPU: 2 PID: 4798 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #91 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88010ce6fb88 ffffffff82344740 0000000041b58ab3 ffffffff84f97a20 ffffffff82344694 ffff88010ce6fbb0 ffff88010ce6fb60 000000000000c350 ffff88010ce6f968 dffffc0000000000 ffffffff857bc320 Call Trace: [] dump_stack+0xac/0xfc [] ? _atomic_dec_and_lock+0xc4/0xc4 [] ubsan_epilogue+0xd/0x8a [] handle_overflow+0x202/0x23d [] ? val_to_string.constprop.6+0x11e/0x11e [] ? timerqueue_add+0x151/0x410 [] ? hrtimer_start_range_ns+0x3b8/0x1380 [] ? memset+0x31/0x40 [] __ubsan_handle_add_overflow+0xe/0x10 [] hrtimer_nanosleep+0x5d9/0x790 [] ? hrtimer_init_sleeper+0x80/0x80 [] ? __might_sleep+0x5b/0x260 [] common_nsleep+0x20/0x30 [] SyS_clock_nanosleep+0x197/0x210 [] ? SyS_clock_getres+0x150/0x150 [] ? __this_cpu_preempt_check+0x13/0x20 [] ? __context_tracking_exit.part.3+0x30/0x1b0 [] ? SyS_clock_getres+0x150/0x150 [] do_syscall_64+0x1b3/0x4b0 [] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================================ Add a new ktime_add_unsafe() helper which doesn't check for overflow, but doesn't throw a UBSAN warning when it does overflow either. Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Richard Cochran Cc: Prarit Bhargava Signed-off-by: Vegard Nossum Signed-off-by: John Stultz Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

hrtimer: Catch illegal clockids

2016-09-15T06:27:44Z

[ Upstream commit 9006a01829a50cfd6bbd4980910ed46e895e93d7 ] It is way too easy to take any random clockid and feed it to the hrtimer subsystem. At best, it gets mapped to a monotonic base, but it would be better to just catch illegal values as early as possible. This patch does exactly that, mapping illegal clockids to an illegal base index, and panicing when we detect the illegal condition. Signed-off-by: Marc Zyngier Cc: Tomasz Nowicki Cc: Christoffer Dall Link: http://lkml.kernel.org/r/1452879670-16133-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

hrtimer: Handle remaining time proper for TIME_LOW_RES

2016-02-17T20:30:57Z

commit 203cbf77de59fc8f13502dcfd11350c6d4a5c95f upstream. If CONFIG_TIME_LOW_RES is enabled we add a jiffie to the relative timeout to prevent short sleeps, but we do not account for that in interfaces which retrieve the remaining time. Helge observed that timerfd can return a remaining time larger than the relative timeout. That's not expected and breaks userland test programs. Store the information that the timer was armed relative and provide functions to adjust the remaining time. To avoid bloating the hrtimer struct make state a u8, which as a bonus results in better code on x86 at least. Reported-and-tested-by: Helge Deller Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: John Stultz Cc: linux-m68k@lists.linux-m68k.org Cc: dhowells@redhat.com Link: http://lkml.kernel.org/r/20160114164159.273328486@linutronix.de Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

time: Fix spelling in comments

2015-09-22T10:54:23Z

Signed-off-by: Zhen Lei Cc: Hanjun Guo Cc: John Stultz Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rafael J. Wysocki Cc: Thomas Gleixner Cc: Tianhong Ding Cc: Viresh Kumar Cc: Xinwei Hu Cc: Xunlei Pang Cc: Zefan Li Link: http://lkml.kernel.org/r/1440484973-13892-1-git-send-email-thunder.leizhen@huawei.com [ Fixed yet another typo in one of the sentences fixed. ] Signed-off-by: Ingo Molnar

hrtimer: Handle failure of tick_init_highres() gracefully

2015-08-22T08:57:50Z

Commit 75e3b37d0598 ("hrtimer: Drop return code of hrtimer_switch_to_hres()") drops the return code of hrtimer_switch_to_hres(). While doing so, it also drops the return statement itself on failure. This may cause a system hang. Seen when running arm:multi_v7_defconfig in qemu with devicetree file vexpress-v2p-ca9. Fixes: 75e3b37d0598 ("hrtimer: Drop return code of hrtimer_switch_to_hres()") Cc: Luiz Capitulino Signed-off-by: Guenter Roeck Link: http://lkml.kernel.org/r/1440231047-16256-1-git-send-email-linux@roeck-us.net Signed-off-by: Thomas Gleixner

hrtimer: Unconfuse switch_hrtimer_base() a bit

2015-08-18T16:36:59Z

The variable called "this_base" is confusing because its name suggests it's of "struct hrtimer_clock_base" type, along with "base" and "new_base" which doesn't help understanding this complicated function. Make its name clearer and fix the misleading comment while at it. [ tglx: Fixed the comment for real ] Signed-off-by: Frederic Weisbecker Link: http://lkml.kernel.org/r/1439907509-9553-3-git-send-email-fweisbec@gmail.com Signed-off-by: Thomas Gleixner

hrtimer: Simplify get_target_base() by returning current base

2015-08-18T16:36:59Z

Instead of fetching again the current cpu base, just take it from the parameter. Signed-off-by: Frederic Weisbecker Link: http://lkml.kernel.org/r/1439907509-9553-2-git-send-email-fweisbec@gmail.com Signed-off-by: Thomas Gleixner

hrtimer: Drop return code of hrtimer_switch_to_hres()

2015-08-17T21:19:03Z

It's not checked by the caller. Signed-off-by: Luiz Capitulino Link: http://lkml.kernel.org/r/20150811164043.538241ef@redhat.com Signed-off-by: Thomas Gleixner